Re: The development trend for optical transmission equipment

nonford wrote: 
Optical transmission equipment with broadband access and comprehensive
service access has become the cosset in the most recent trend of
development. On the one hand, products based on the PDH technique,
which cost less than nine hundred USD, exhibit supreme inexpensiveness;
on the other, the optical transmission equipment that develops on the
basis of SDH technique, more often than not, is required by customers
to be equipped with Ethernet interface or video frequency interface.
As a typical PDH equipment, OM8E1PCM, produced by Heng Guang
Technologies, Co., Ltd in Tianjin, China has integrated eight E1
channels, one 10/100BASE-T Ethernet channel, one NX64bps, V.35 channel
and PCM30 with 30 channels. However, the exquisite equipment featured
by its 2U height and 19- inch width costs only 1000 odd USD. (For more
information about this equipment, please login www.pcm30.com .)
Sometimes, the designer may consider to realize the functions of VDF,
DDF and ODF on the PCM, so as to provide the most customized and
convenient product to clients. Such equipment is various and multiform
in configuration and modality, which includes the European 7R series
and 19-inch configuration.
At the same time, SDH equipment with E1 channel, 1000M Ethernet
interface and multi-channel 100M Ethernet interface has been more and
more popularized. The broadband interface usually will adopt automatic
and dynamic distribution manner, such as RPR technique.
From the discussion above, we can safely draw the conclusion that, 
low-priced optical equipment will be developed to include the
comprehensive service access system. In addition to
10Base-T,100Base-T,1000Base-T with E1,E2,E3,T1,T2,T3 channels, 10/100
auto-adaptation Ethernet, G.703 V35 interface, V11/V24 interfaces,
video frequency, even the SCADA system is about to be able to
transmitted in one or two optical fibers.

As all this wonderful technology requires a 19" rack I suspect that it will be a little too large to interest the mobile community!
.

Relevant Pages

  • Re: Looking for web server controller PCB, like NETIOM, what are the alternative offerings?
    ... The rabbit microcontrollers have an Ethernet interface and can be programmed ... using C. I've used one myself, they're very useful pieces of equipment. ...
    (comp.home.automation)
  • Re: The development trend for optical transmission equipment
    ... what you do claim to be "development trend" in optical networking. ... > Optical transmission equipment with broadband access and comprehensive ... > to be equipped with Ethernet interface or video frequency interface. ...
    (sci.optics.fiber)
  • Re: Automatic power metering - existing products and new functions
    ... > My problem relates to automatic power metering (by electric power ... > currently looking at enhancing existing automatic metering systems ... > problem is interfacing the new equipment with existing equipment, ... the interface hardware is contained entirely within ...
    (sci.electronics.design)
  • Re: Cable vs Satellite.... again....
    ... The new head-end equipment to handle this. ... SD analog-out STBs for SD customers. ... cable if no channels can be received). ... | Also, it seems like satellite is cheaper than ...
    (alt.tv.tech.hdtv)
  • Re: struct class question
    ... we don't need a struct device and/or struct class_device for it. ... but no sysfs representation on ... in the same way, as you pointed out, channels are represented ... > flat look into that for devices implementing the specific interface. ...
    (Linux-Kernel)