Re: Wireless router problem

Thanks Kraftee and Tim for your suggestions.

She's on Channel 11 and she does sometimes detect another network on
Channel 6.

Neither the router nor the computer is using encryption at this stage,
and the TCP/IP settings look OK. However, I can't rule out some sort of
mismatch because what is happening (or rather not happening!) doesn't
make much sense.

I'll talk to her later today and suggests she experiments with other
channels. And when I can get over there I will recheck the settings.

Cheers, Roger

.

Relevant Pages

  • Re: Wii Wont Connect to Internet
    ... telling me to disable the encryption on my Linksys WRT54G ... Is changing it to Channel 11 ... Turning off encryption at the router and at the Wii is a good experiment, ...
    (rec.games.video.nintendo)
  • Re: D link DI-784 router
    ... I did the reset and lost the connection. ... changed channel to 40. ... I went into router configuration, ... Local ports 1-4, all are on and steady, port 1 is the only one used. ...
    (microsoft.public.windows.mediacenter)
  • Re: IBSS wireless channel is different the routers but works - interesting?
    ... IBSS channel number and WZC IBSS channel number ... There are at least 3 MAC addresses involved in your wireless router. ... When your unspecified wireless client connects to your unspecified ...
    (alt.internet.wireless)
  • Re: Two access points in same house
    ... your laptop will then select the better signal. ... but I'll disable it on both the router and the AP temporarily. ... I change the AP to use channel 1 and leave the router on channel 6. ... I don't think the DLINK products like to devices ...
    (alt.internet.wireless)
  • Re: Wired/ wireless router best choice?
    ... room as the router and I have had no problems connecting. ... wireless networking (which incidentally caused VRPC to stop ... and recommended changing channel from 1 or 6 to 11. ...
    (comp.sys.acorn.hardware)