Re: USB 2.0 slower than USB 1.0 with wireless gateway ??




"Phil Thompson" <phil.thompson@xxxxxxxxxxx> wrote in message
news:6h89h15pta4nefq8r78pqh9j1rvgtu4ltc@xxxxxxxxxx
> On 30 Aug 2005 10:51:20 -0700, ian_sutherland_coillebhar@xxxxxxxxxxxxx
> wrote:
>
>>With the wireless adapter pluged into the USB 1.0 port, the status of
>>the wireless network shows a speed of 54Mbps, but connect it to the
>>USB2.0 port and the speed drops to 1.0Mbps. I
>
>
> this sounds like an interference issue, if the signal strength is so
> weak that it falls all the way back to 1 Mbps. Does it show sig
> strength on the utility or systray icon ?

Fifth harmonic perhaps? (USB 480Mbps; 802.11g 2G4Hz).

>
> try it on a short (or maybe long) USB extension lead.
>
> Phil


.



Relevant Pages

  • Re: USB 2.0 slower than USB 1.0 with wireless gateway ??
    ... >USB2.0 port and the speed drops to 1.0Mbps. ... this sounds like an interference issue, if the signal strength is so ... try it on a short USB extension lead. ... Tiscali - dialup speeds at Broadband prices, ...
    (uk.telecom.broadband)
  • usb_insert_transfer panic with if_zyd
    ... When I use my ZyXEL G-220 Wireless USB Stick with the if_zyd driver, ... <ACPI PCI bus> on pcib0 ... device problem, disabling port 1 ... <Ethernet over FireWire> on firewire0 ...
    (freebsd-current)
  • 2.6.10-rc1 & ahci & IHC6R & 925X & raid1
    ... usb modules for console, usb keyboard, network and starting a shell. ... ACPI: PM-Timer IO Port: 0x808 ... PCI: PCI BIOS revision 2.10 entry at 0xfb768, ... usbcore: registered new driver hub ...
    (Linux-Kernel)
  • usb does not work on vias smp mainboard
    ... I installed kernel 2.4.21 on an via's mainboard, it seems that the usb ... number of MP IRQ sources: ... PCI Interrupt Link ... Port indicators are not supported ...
    (Linux-Kernel)
  • Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
    ... When the USB reciever is already plugged-in at boot-time and the ... hub 2-2:1.0: USB hub found ... Interface Descriptor: ... Hub Port Status: ...
    (Linux-Kernel)