Re: Router advice please

poster wrote:
> On 25 Jul 2005 21:24, "Ivor Jones" <ivor@xxxxxxxxxxxxxxxxx> wrote:
>
>> With a straight through cable, use the uplink port.
>> But use a switch, not a hub.
>
> Why bother with a switch in preference to a hub ? Will you next tell
> us that 100 Mbps is 'better' than 10 Mbps ? Peter M.

For the internet very little benefit, but for a LAN, if you are going to
file & printer share or even play games, then faster the speed the better,
remembering of course that everything will be 'choked' by the lowest common
denominator.


.

Relevant Pages

  • Re: Backup to USB works but to NAS fails
    ... You've heard it before, but replace that hub with a switch as soon as possible. ... On windows it's a setting in the network card settings and usually ... Getting this up to 100Mb/s lan speed ...
    (microsoft.public.windows.server.sbs)
  • Re: Backup to USB works but to NAS fails
    ... On windows it's a setting in the network card settings and usually ... On a HUB ALL data is transmitted to ALL ports. ... Getting this up to 100Mb/s lan speed (either back-to-back or ... One switch is not the same as the next.. ...
    (microsoft.public.windows.server.sbs)
  • Re: Digital switch over query
    ... > ethernet switch(ing hub). ... a box is a hub or a box is a switch and there is a difference between ... SoHo router to gigabit speed when the benefit would ... after waiting a couple of hours for the first test install to ...
    (uk.tech.digital-tv)
  • Re: Wish to network my home computers but dont know Jack about it
    ... So a computer network may have 4 computers on one segment of wires, ... You can think of a hub ... get a hub instead of a switch. ...
    (Debian-User)
  • eth0 works with Linksys hub but not Netgear switch?!?
    ... network works fine when it's plugged into a Linksys ... EW5HUB hub, but not when it's plugged into a Netgear FS608v2 switch ... kernel: ip_tables: 2000-2002 Netfilter core team ...
    (comp.os.linux.networking)