Re: Sky blocking signal to VCR
- From: "Whoops! SCOTTIES" <nospasmthankyouverymuchnova88fm@xxxxxxxxxxxxxx>
- Date: Tue, 29 Nov 2005 08:37:06 -0000
the output from the sky box is probably on, or too close to, the output freq
of the vcr. go to Services, 4, 01, select, rf outlets on your sky menus.
change the rf out freq on the digi box to something that's blank in your
area 21-68. if the main tv and vcr are not connected via scart cables,
you'll have to retune them to the new freq you will choose.
"DAC" <dc@xxxxxxxxxxx> wrote in message
news:1133214253.771694.159540@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> This may be a stupid question, but... the other day I had unplugged the
> TV / VCR in the bedroom, connected to Sky + and terestrial via a
> mini-link.
>
> When I plugged it all back in I could not get the TV reception through
> the VCR.
>
> I can get normal reception with mini-link direct to TV. I can watch
> videos via the scart to the TV.
>
> I have tried tuning the VCR but can't get a signal back.
>
> Both VCR and TV are 10+ years old.
>
> So, is there something from Sky / Digi box that can be preventing
> signal going through the VCR to the TV?
>
> Hope that makes sense!
>
> Cheers
>
.
- Follow-Ups:
- Re: Sky blocking signal to VCR
- From: DAC
- Re: Sky blocking signal to VCR
- References:
- Sky blocking signal to VCR
- From: DAC
- Sky blocking signal to VCR
- Prev by Date: Re: Pixmania
- Next by Date: Re: It's time to ban widescreen.
- Previous by thread: Sky blocking signal to VCR
- Next by thread: Re: Sky blocking signal to VCR
- Index(es):
Relevant Pages
|
