Re: Neat and Tidy
- From: "Chris" <cjk32@xxxxxxxxx>
- Date: 4 Oct 2005 02:36:57 -0700
> If you only want to run an output from the Sky doobrie to the monitor
> then I would be inclined to just use the required leads from the
> wallplate to the TV's input and ditch the SCART idea. Use a plate with
> 2, or 4, phono sockets and run 2, or 4, leads up to the TV with a
> SCART adaptor on it. (2 or 4 being for composite and audio or RGB and
> audio),
>
> Something like that anyway.
>
RGB + audio will need at least 6:
Red, Green, Blue, Composite, Left, Right (The composite is required for
the sync signal). You may also need to send the SCART switching
signals on pins 8 and 16. These may be required to force the TV into
RGB mode, and also carry aspect ratio information.
Chris Key
.
- Follow-Ups:
- Re: Neat and Tidy
- From: Lurch
- Re: Neat and Tidy
- References:
- Neat and Tidy
- From: Jase
- Re: Neat and Tidy
- From: Mat Overton
- Re: Neat and Tidy
- From: Lurch
- Neat and Tidy
- Prev by Date: Re: frequencies of DTT muxes after switchover - do aerial riggers know?
- Next by Date: Re: frequencies of DTT muxes after switchover - do aerial riggers know?
- Previous by thread: Re: Neat and Tidy
- Next by thread: Re: Neat and Tidy
- Index(es):
Relevant Pages
|
