which seems to be correct. As I see the same connector can be used for
composite and component signals as well. Are there differences in
connecting cables or I can just use any male-to-female 14-pin cable to
connect my recorder (which uses composite signal of course).
The second thing is synchronisation. I've BNC video in and out
connectors which seems to work correctly - I can record composite signal
and get the playback on the monitor. However when I'm trying to play
back through pin 8 and 9 of the 14-pin socket the image is out of sync.
As I understand the signal is used to feed video back to the viewfinder.
Is this signal genlocked somehow with camera? Or it's fault of my recorder?
Re: type writers and tooth aches II ... >We are a signal processing machine with eyes that produce different signals... How does our basic understanding of the brain... >> of energy without explanation also. ... >problem is that people feel there needs to be a "connector" of some type ... (comp.ai.philosophy)
Re: type writers and tooth aches II ... We are a signal processing machine with eyes that produce different signals... and the internal sensory signals. ... us with a split view of all reality (aka our sensory reality - which is the ... problem is that people feel there needs to be a "connector" of some type ... (comp.ai.philosophy)
Re: Can multiple Ferrite Beads be used to connect ...? ... OK, so I have a FPGA module which will be connected to a motherboard via a connector, which also provides the power supply. ... It's a Hirose 100 pin connector; I dedicate 25 pins to ground so both boards will have good ground plane continuity.... However, the +3.3V power supply also comes through this connector, so I made a little drawing of the two options, with or without choke on the main power supply. ... Anyway, I tried to contour the power plane so that the decoupling caps between GND and +3.3V are on the edge of the plane, so signals exiting the module will have their return path either through GND plane or through the decap. ... (comp.arch.fpga)
Drake R7 problem found ... I found the problem with my Drake R7 with blank display.... there are two signals that come from the VCO board.... to that 3-pin Molex connector on the top of the VCO board. ... (rec.radio.shortwave)
Re: Best Buy Extended Warranty ... One set is the "pure digital" signals, which are exactly the same as those present on a DVI-D connector.... They may be analog and digital representations of the same display image, but they may also be completely different and independent, even having different resolutions, as in a video board that supports dual-monitor configurations. ... I am not aware of ANY analog monitors with DVI connectors, ... (comp.sys.laptops)
