Re: Vantage Pro and BST -> GMT

Steve Loft wrote:
Alan Gardiner wrote:
I would be interested in the answer myself although I have avoided the
problem by not adjusting the time and sticking with GMT throughout the
year.

This is a sensible thing to do, although not always workable if the PC
has to do other things as well. I assume this requires you to keep both
the station and the PC on GMT?


I'm not sure I follow your idea that it's not workable if the PC has
other things to do as well. I always keep my PCs on GMT, so the time on
this machine is apparently 13:41. But the time stamp on this message
will be 14:41 or just after.

But perhaps you have other needs/software that demands the PC shows BST.

Hugh

--

Hugh Newbury

www.evershot-weather.org
.

Relevant Pages

  • Re: overdrive recovery
    ... PCB by sticking a few xtra diodes. ... By adjusting the bias voltage on the first transistor in MooseFET's post, ...
    (sci.electronics.design)
  • Re: TECH: Ramp flap on RFM
    ...  I rebuilt the assembly and used a new coil sleeve. ... solenoid plunger was sticking out ever so slightly. ...
    (rec.games.pinball)