Re: HELP!!!! 232 cable pin out please

I've had my 114GT connected to the PC via the handset and it works fine. Out
of interest the Meade LX90 connects to the PC also via the handset.

Good luck with it.

Regards


Chris


"Hayley" <cambs.home@xxxxxxxxxxxx> wrote in message
news:NkGTe.7771$Y06.4583@xxxxxxxxxxxxxxxxxxxxxxx
> Oh now youve got me thinking!!! maybe I cant, maybe ive got to go through
> the hand controller.
>
> ok well a quick rewire needed, I was hoping i could do away with the hand
> set, thanks for you help.
>
> Regards
>
>
> Simon
> "Chris Taylor" <nothing@xxxxxxxxxxx> wrote in message
> news:cUFTe.4040$Pn1.3869@xxxxxxxxxxxxxxxxxxxxxxx
>> I've not heard of connecting in this manner. Didn't know you could?
>>
>> Sorry.
>>
>> Chris
>>
>>
>> "Hayley" <cambs.home@xxxxxxxxxxxx> wrote in message
>> news:uSFTe.721$Q%2.134@xxxxxxxxxxxxxxxxxxxxxxx
>>> Hi,
>>>
>>> My appologies, ive not made it clear, the diagram shown in the resource
>>> site shows the connector on the bottom of the handset for connection to
>>> the PC, I want to go straight from the scope to the PC without having
>>> the nexstar plugged in. so I need the pin outs for 232 on the actual
>>> scope.
>>>
>>> Regards
>>>
>>> Simon
>>> "Chris Taylor" <nothing@xxxxxxxxxxx> wrote in message
>>> news:myFTe.2273$st1.365@xxxxxxxxxxxxxxxxxxxxxxx
>>>>
>>>> "Hayley" <cambs.home@xxxxxxxxxxxx> wrote in message
>>>> news:ykFTe.9877$vC4.7037@xxxxxxxxxxxxxxxxxxxxxxx
>>>>> Hi, I need to know the rx, tx and gnd pins on the 6 pin RJ11 connector
>>>>> on the
>>>>> celestron nexstar 114gt scope.
>>>>>
>>>>> its in the user manual which ive lost!!! ive done a quick search on
>>>>> google but found it shown
>>>>> as a 4 pin socket, mine is a 6 pin!!!.
>>>>>
>>>>> the pin outs would be much appreciated
>>>>>
>>>>> regards
>>>>>
>>>>>
>>>>> Simon
>>>>>
>>>>
>>>> Lookie here
>>>> http://www.nexstarsite.com/PCControl/RS232Cable.htm
>>>>
>>>> A wealth of info here also
>>>> http://www.nexstarsite.com/
>>>>
>>>> Hope this helps
>>>>
>>>> Regards
>>>>
>>>>
>>>> Chris
>>>>
>>>
>>>
>>
>>
>
>


.

Relevant Pages

  • Re: HELP!!!! 232 cable pin out please
    ... the hand controller. ... Regards ... > I've not heard of connecting in this manner. ... so I need the pin outs for 232 on the actual scope. ...
    (uk.sci.astronomy)
  • Re: MediaNet service with data card?
    ... No -- I just move my one SIM back and forth between my handset and my ... data card. ... of connecting, so I don't think it's the slots that would be full. ... battery indicator and never reached full charge while ...
    (alt.cellular.cingular)
  • Converting phone handset audio to PC soundcard line-in audio
    ... I have been recording weekly conference calls since January, ... connecting my cordless phone to the line-in jack on my PC's soundcard ... apart the handset on my wired phone to see which wires connected the ... jack to ground on a spliced audio cable, and connected pin 3 on ...
    (sci.electronics.basics)
  • Re: Home network...
    ... HUGE thanks to Jim Macklin, Courtney, Brian A.,and Jim Macklin. ... > Can anyone point me to a step by step primer for connecting two home Pc's. ... > regards, Richard ...
    (microsoft.public.windowsxp.general)
  • RE: NDR Question
    ... The issue can be caused by connecting to the wrong MX record. ... clarify following points: ... Best regards, ... Terry Liu ...
    (microsoft.public.exchange.admin)