Re: EGNOS working at last!
- From: "Paul Saunders" <pvs1@xxxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 24 Apr 2006 23:39:59 +0100
Jim Ford wrote:
Hmm, I had a hollow bar on 39 about 3 units high for a lot longer
than 5 mins but it never turned black and 'D's never appeared on the
'ordinary' bars.
I'll give it another try - not because I need the extra accuracy, but
just to see if I can get it working!
Well it sounds like you were almost there. As I said, Garmin have just
released a patch for the 60/76 series to make it easier to connect to the
EGNOS satellites, so it may be worth you checking their site to see if
there's a patch for your model.
So, if EGNOS is so difficult and
unreliable,
The reason it's so difficult and unreliable right now is that it isn't fully
working yet, it's still in the testing stage. Once it's fully operational
it should work much better.
what use is it except as a technical curiosity?
When there are enough satellites and it's accurate enough, it may be used to
help land aeroplanes safely (GPS is not quite good enough for that yet), and
it will make accurate surveying a lot easier.
If its use
is mainly maritime, it seems a lot of money to spend on whizz-bang
technology to enable lobster fishermen to locate their pots more
easily!
I'm sure they're not spending all that money for the benefit of walkers and
lobster fishermen! There are lots of good professional and commercial
reasons for it, we're just lucky enough to share the benefits.
Next time you're out walking, try hiding something under a rock and marking
the spot. Next time you go there, see if you can find it again.
Paul
.
- Follow-Ups:
- Re: EGNOS working at last!
- From: W. D. Grey
- Re: EGNOS working at last!
- From: Rudi Winter
- Re: EGNOS working at last!
- From: Jim Ford
- Re: EGNOS working at last!
- References:
- EGNOS working at last!
- From: Paul Saunders
- Re: EGNOS working at last!
- From: Jim Ford
- Re: EGNOS working at last!
- From: druidh
- Re: EGNOS working at last!
- From: Jim Ford
- Re: EGNOS working at last!
- From: Paul Saunders
- Re: EGNOS working at last!
- From: Jim Ford
- Re: EGNOS working at last!
- From: John Yale
- Re: EGNOS working at last!
- From: Jim Ford
- Re: EGNOS working at last!
- From: Dominic Sexton
- Re: EGNOS working at last!
- From: Paul Saunders
- Re: EGNOS working at last!
- From: Jim Ford
- EGNOS working at last!
- Prev by Date: Re: Mull trip May - Hey Martin!
- Next by Date: Re: Mull trip May - Hey Martin!
- Previous by thread: Re: EGNOS working at last!
- Next by thread: Re: EGNOS working at last!
- Index(es):
Relevant Pages
|