Re: Millport Bay

Dennis Pogson wrote:
Slowcoach! I did the circuit of the island in 25 minutes, but that was on my
own racing bike.

Take the gears off, replace the frame with solid iron, fit 26 x 1-3/8ths and have another go. I'm sure the equipment helps.

I'm also sure I wouldn't do that time these days...

Andy
.

Relevant Pages

  • Re: BMX Bike building
    ... Kudos to Dan's Comp for their customer service. ... Needed a shim to make it fit. ... craftsmanship of the frame. ... Both the tube manufacturer and the bike manufacturer state ...
    (rec.bicycles.tech)
  • Re: Hub gear scorcher
    ... frame I could find. ... Old lightweight frames intended for sports hub gears would be 110mm spacing or thereabouts and would probably be 1940s or 1950s but most frames with "horizontal" dropouts intended for DR gears would be OK for a Sturmey Archer hub as long as you don't mind the extras little frame bits you don't need or are happy to cut 'em off. ... From the introduction of the feeble 5 StAr in the early 1990s, Sturmey Archer 5 speeds do not have the famous neutral. ...
    (rec.bicycles.tech)
  • Re: How many gears are enough?
    ... box, and did so too, if to a lesser extent, on my Shimano 8-speed ... how many gears do the majority of buyers actually ... Page 40 of 71 requires a frame that accepts the x-box. ... Rohloff (less is unlikely -- a Rohloff is very economical of demands ...
    (rec.bicycles.tech)
  • Re: Something to play with?
    ... the frame from tubing, if you are handy with a welder. ... (tires, clutch, engine, sprockets) ... As to a woods bike, I went to Honda today and saw a couple that I ... inch;) She is tiny for her age, and might not fit up on it. ...
    (rec.motorcycles.dirt)
  • Re: BMX Bike building
    ... TRhe cup is just too big to fit easily. ... Part of the background here is that "Euro" is BMX's word for the ... Italian is slightly larger. ... We're having some success getting them in to the frame, ...
    (rec.bicycles.tech)