Re: sparking/electrical problem with Peco points
- From: Greg Procter <Procter@xxxxxxxxxx>
- Date: Thu, 23 Mar 2006 08:35:23 +1200
Keith wrote:
On Wed, 22 Mar 2006 21:17:14 +1200, Greg Procter <Procter@xxxxxxxxxx>
wrote:
Because if you don't break the links marked in yellow you will have amodified to http://mrol.gppsoftware.com/livefrogwiring.asp
Now that I've taken a good look at your rewiring diagramme, I have to
ask why you break the links maked in yellow???
dead short when you add the links marked in red.
Keith
NB. I thought Grahams page would explain it,
His page says _what_ to do, but not _why_.
As I'm apparently trying to achieve an end that he has rejected, I need
to know why he says each modification should be done.
but the idea is to divide
the point up into 3 pieces, left and right stock rail/blade sets and
the frog so that the frog polarity can be externally switched. The red
links provide power to the blades at the same polarity as the adjacent
stock rail so that, 1. you are not reliant on blade contact for power
I can see that that could be a problem for me long term as I hadn't
noticed the lack of under-blade contacts.
2. the blade remains at stock rail potential when open so you can't
get shorts through the back of flange contacting the open blade.
I've never had that problem so I'm not sure I need to fix it. :-)
I don't want to fix the problem of following track isolation through
insulated fishplates because I consider it to be a positive function.
Regards,
Greg.P.
.
- Follow-Ups:
- Re: sparking/electrical problem with Peco points
- From: gppsoftware
- Re: sparking/electrical problem with Peco points
- References:
- sparking/electrical problem with Peco points
- From: Elliott Cowton
- Re: sparking/electrical problem with Peco points
- From: gppsoftware
- Re: sparking/electrical problem with Peco points
- From: Greg Procter
- Re: sparking/electrical problem with Peco points
- From: gppsoftware
- Re: sparking/electrical problem with Peco points
- From: Greg Procter
- Re: sparking/electrical problem with Peco points
- From: gppsoftware
- Re: sparking/electrical problem with Peco points
- From: gppsoftware
- Re: sparking/electrical problem with Peco points
- From: Greg Procter
- Re: sparking/electrical problem with Peco points
- From: gppsoftware
- Re: sparking/electrical problem with Peco points
- From: Greg Procter
- Re: sparking/electrical problem with Peco points
- From: Keith
- sparking/electrical problem with Peco points
- Prev by Date: Re: Model magazines
- Next by Date: Re: Back to Back wheel Measurements
- Previous by thread: Re: sparking/electrical problem with Peco points
- Next by thread: Re: sparking/electrical problem with Peco points
- Index(es):
Relevant Pages
|