Re: DIY decals


Paul Boyd wrote:
> Has anyone tried successfully making their own decals/transfers using
> the DIY sheets available?


For one-offs, you could try a very cheap and surprisingly effective
method my dad once used.

Get an envelope (the "lick to stick" type). Apply 3 or 4 coats of
varnish to the adhesive. Paint whatever lettering you need on the
varnish. If it goes wrong, start again (you don't spoil your model).
Apply several coats of varnish. Cut out, soak and apply. The only
thing to be aware of is that soaking takes MUCH longer than commercial
waterslide transfers.

As I say, the results are surprisingly good. It does, of course, need
care and time.

PhilD

--
<><

.

Quantcast