Tyzacks & Sons Lathe

From: "John W" <wilbur@xxxxxxxxxxx>
Date: Thu, 29 May 2008 10:42:53 +0930

Hi All
I am looking for a manual for a Tyzack & Sons lathe.
I cannot find a model number.
However it has a 4 inch chuck, 6 inch face plate & approx 12 inches between
centres.
Any help would be appreciated. (Can proivide a picture if that will help)

Thanks
John W
Greenhill
South Australia

.

Follow-Ups:
- Re: Tyzacks & Sons Lathe
  - From: Kevin(Bluey)

Prev by Date: Cleaning 3-jaw chuck
Next by Date: Re: Cleaning 3-jaw chuck
Previous by thread: Cleaning 3-jaw chuck
Next by thread: Re: Tyzacks & Sons Lathe
Index(es):
- Date
- Thread

Relevant Pages

Tyzack & Sons Lathe
... I am looking for a manual for a Tyzack & Sons lathe. ... I cannot fond a model number. ... (Can proivide a picture if that will help) ...
(uk.rec.engines.stationary)
Re: Tyzack & Sons Lathe
... I am looking for a manual for a Tyzack & Sons lathe. ... I cannot fond a model number. ... (Can proivide a picture if that will help) ...
(uk.rec.engines.stationary)
Re: Tyzacks & Sons Lathe
... John W wrote: ... I am looking for a manual for a Tyzack & Sons lathe. ... I find it interesting,I didn't know that Tyzack & Sons made lathes. ... Kevin (Bluey) ...
(uk.rec.models.engineering)
Re: Tyzacks & Sons Lathe
... I am looking for a manual for a Tyzack & Sons lathe. ... I find it interesting,I didn't know that Tyzack & Sons made lathes. ... I suspect the lathe may have been made by another maker and badged by Tyzack. ... Kevin (Bluey) ...
(uk.rec.models.engineering)