uk.rec.models.engineering

• Date Index

---

• Need a new compressor, Mr Crane
  • Re: Need a new compressor, mark
• AWEM, mark@xxxxxxxxxxxxxx
  • Re: AWEM, Charles Ping
  • Re: AWEM, Norman Billingham
    • Re: AWEM, James
      • Re: AWEM, Chris Edwards
      • Re: AWEM, Tony Jeffree
      • Re: AWEM, Mark Rand
      • Re: AWEM, Andrew Mawson
      • Re: AWEM, rsss
• Bantam in a Van?, Peter Neill
  • Re: Bantam in a Van?, Mark Rand
  • Re: Bantam in a Van?, Prepair Ltd
    • Re: Bantam in a Van?, Peter Neill
      • Re: Bantam in a Van?, Alastair
      • Re: Re: Bantam in a Van?, Peter A Forbes
      • Re: Bantam in a Van?, Charles Ping
      • Re: Bantam in a Van?, Wes
  • Re: Bantam in a Van?, jontom_1uk
  • Re: Bantam in a Van?, Chris Edwards
  • Re: Bantam in a Van?, John Stevenson
• Modelmakers, Engineers and Who will get your money, jontom_1uk
  • Re: Modelmakers, Engineers and Who will get your money, ravensworth2674
    • Re: Modelmakers, Engineers and Who will get your money, Wes
  • Re: Modelmakers, Engineers and Who will get your money, Richard
    • Re: Modelmakers, Engineers and Who will get your money, Tony Jeffree
      • Re: Modelmakers, Engineers and Who will get your money, Charles Ping
      • Re: Modelmakers, Engineers and Who will get your money, Cheshire Steve
• Gear Cutting, James Lugsden
• Monitoring motor temperature, Brad.
  • Re: Monitoring motor temperature, Richard
    • Re: Monitoring motor temperature, Brad.
  • Re: Monitoring motor temperature, John
  • Re: Monitoring motor temperature, Christopher Tidy
• Aladdins Cave for Sale, Peter Neill
  • Re: Aladdins Cave for Sale, Peter Neill
    • Re: Aladdins Cave for Sale, Peter Neill
  • Re: Aladdins Cave for Sale, ticktock
• Milling a slot, with light equipment, MikeH_QB
  • Re: Milling a slot, with light equipment, Dave Baker
    • Re: Milling a slot, with light equipment, MikeH_QB
  • Re: Milling a slot, with light equipment, David Littlewood
• Re: Online Mechanical Engineering Calculator Tool - FREE to use online, John Stevenson
  • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Tony Jeffree
    • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, John Stevenson
    • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, mark
      • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Tony Jeffree
  • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Wes
  • <Possible follow-ups>
  • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Mark Rand
  • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Cliff Coggin
    • Message not available
      • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Tony Jeffree
      • Message not available
      • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Tony Jeffree
      • Message not available
      • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Tony Jeffree
      • Message not available
      • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Trevor Jones
    • Message not available
      • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Cliff Coggin
    • Message not available
      • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Wes
      • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Trevor Jones
      • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Jack Watson
      • Re: Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Peter A Forbes
      • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Mark Rand
      • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Trevor Jones
      • Re: Online Mechanical Engineering Calculator Tool - FREE to use online, Wes
• Cleaning cast alloy angine sump, pre TIG repair, Rob
  • Re: Cleaning cast alloy angine sump, pre TIG repair, Martin Whybrow
  • Re: Cleaning cast alloy angine sump, pre TIG repair, Peter Fairbrother
    • Re: Cleaning cast alloy angine sump, pre TIG repair, Steve R.
  • Re: Cleaning cast alloy angine sump, pre TIG repair, John Stevenson
    • Re: Cleaning cast alloy angine sump, pre TIG repair, Charles Ping
      • Re: Cleaning cast alloy angine sump, pre TIG repair, Mike
      • Re: Cleaning cast alloy angine sump, pre TIG repair, jlh45
      • Re: Cleaning cast alloy angine sump, pre TIG repair, Mike
  • Re: Cleaning cast alloy angine sump, pre TIG repair, dave sanderson
  • Re: Cleaning cast alloy angine sump, pre TIG repair, mark
    • Re: Cleaning cast alloy angine sump, pre TIG repair, Rob
      • Re: Cleaning cast alloy angine sump, pre TIG repair, Rob
      • Re: Cleaning cast alloy angine sump, pre TIG repair, mark
      • Re: Cleaning cast alloy angine sump, pre TIG repair, Peter Fairbrother
      • Re: Cleaning cast alloy angine sump, pre TIG repair, Richard Edwards
      • Re: Cleaning cast alloy angine sump, pre TIG repair, Peter Fairbrother
      • Re: Cleaning cast alloy angine sump, pre TIG repair, Rob
      • Re: Cleaning cast alloy angine sump, pre TIG repair, Don Young
• Machine sounds, John Stevenson
  • Re: Machine sounds, Tony Jeffree
    • Re: Machine sounds, John Stevenson
  • Re: Machine sounds, steamer
    • Re: Machine sounds, Tony Jeffree
      • Re: Machine sounds, Richard
    • Re: Machine sounds, Steve
      • Re: Machine sounds, Dragon
      • Re: Machine sounds, Richard
• Meddings Pillar Drill, CoolHands
  • Re: Meddings Pillar Drill, Mark Rand
    • Re: Meddings Pillar Drill, CoolHands
      • Re: Meddings Pillar Drill, Mark Rand
      • Re: Meddings Pillar Drill, elj221c
      • Re: Meddings Pillar Drill, mark
      • Re: Meddings Pillar Drill, Bob Minchin
      • Re: Meddings Pillar Drill, CoolHands
• Leadscrew Material, Nourish
  • Re: Leadscrew Material, Peter Neill
  • Re: Leadscrew Material, jontom_1uk
    • Re: Leadscrew Material, Peter Neill
      • Re: Leadscrew Material, jontom_1uk
  • Re: Leadscrew Material, Nourish
• Clarkson collet needed, Richard Edwards
  • Re: Clarkson collet needed, Richard
    • Re: Clarkson collet needed, Richard Edwards
• Beam Stirling?, Jack Watson
  • Re: Beam Stirling?, Bill
    • Re: Beam Stirling?, Jack Watson
  • Re: Beam Stirling?, Mike H
• Inconel or other Jet nozzle materials, dave sanderson
  • Re: Inconel or other Jet nozzle materials, Peter Fairbrother
    • Re: Inconel or other Jet nozzle materials, dave sanderson
      • Re: Inconel or other Jet nozzle materials, Peter Fairbrother
      • Re: Inconel or other Jet nozzle materials, Ron van Sommeren
      • Re: Inconel or other Jet nozzle materials, dave sanderson
  • Re: Inconel or other Jet nozzle materials, Ron van Sommeren
    • Re: Inconel or other Jet nozzle materials, dave sanderson
    • Re: Inconel or other Jet nozzle materials, Ron van Sommeren
• Machining A Flywheel, Steve
  • Re: Machining A Flywheel, Dave Baker
  • Re: Machining A Flywheel, mark@xxxxxxxxxxxxxx
    • Re: Machining A Flywheel, ravensworth2674
      • Re: Machining A Flywheel, Chris Edwards
      • Re: Machining A Flywheel, ravensworth2674
      • Re: Machining A Flywheel, Tony Jeffree
      • Re: Machining A Flywheel, ravensworth2674
      • Re: Machining A Flywheel, Steve
      • Re: Machining A Flywheel, Steve
  • Re: Machining A Flywheel, Richard Edwards
    • Re: Machining A Flywheel, Richard Edwards
      • Re: Machining A Flywheel, ravensworth2674
  • Re: Machining A Flywheel, Dave Baker
    • Re: Machining A Flywheel, ravensworth2674
      • Re: Machining A Flywheel, Steve
      • Re: Machining A Flywheel, Charles Lamont
      • Re: Machining A Flywheel, Dave Baker
      • Re: Machining A Flywheel, ravensworth2674
      • Re: Machining A Flywheel, Steve
      • Re: Machining A Flywheel, Tony Jeffree
      • Re: Machining A Flywheel, ravensworth2674
      • Re: Machining A Flywheel, Chris Edwards
      • Re: Machining A Flywheel, Steve
• Chronos purchases from overseas, TMN
  • Re: Chronos purchases from overseas, Prepair Ltd
    • Re: Chronos purchases from overseas, Dave Baker
      • Re: Re: Chronos purchases from overseas, Peter A Forbes
  • Re: Chronos purchases from overseas, Dave Baker
  • Re: Chronos purchases from overseas, Tony Jeffree
  • Re: Chronos purchases from overseas, Trevor Jones
    • Re: Chronos purchases from overseas, Tony Jeffree
      • Re: Chronos purchases from overseas, Trevor Jones
      • Re: Chronos purchases from overseas, TMN
      • Re: Chronos purchases from overseas, Steve
      • Re: Chronos purchases from overseas, Phil H
      • Re: Chronos purchases from overseas, Odie Ferrous
      • Re: Chronos purchases from overseas, Mark Rand
  • Re: Chronos purchases from overseas, Jordan
  • Re: Chronos purchases from overseas, Phil H
    • Re: Chronos purchases from overseas, TMN
    • Re: Chronos purchases from overseas, kevin heyes
      • Re: Chronos purchases from overseas, Phil H
      • Re: Chronos purchases from overseas, TMN
• Zeroing dials - setting amount of friction 'hold', MikeH_QB
  • Re: Zeroing dials - setting amount of friction 'hold', ravensworth2674
  • Re: Zeroing dials - setting amount of friction 'hold', ravensworth2674
    • Re: Zeroing dials - setting amount of friction 'hold', Jordan
      • Re: Zeroing dials - setting amount of friction 'hold', Chris Edwards
      • Re: Zeroing dials - setting amount of friction 'hold', jontom_1uk
      • Re: Zeroing dials - setting amount of friction 'hold', jontom_1uk
      • Re: Zeroing dials - setting amount of friction 'hold', Peter Neill
      • Re: Zeroing dials - setting amount of friction 'hold', jontom_1uk
      • Re: Zeroing dials - setting amount of friction 'hold', Sandy Morton
      • Re: Zeroing dials - setting amount of friction 'hold', Steve
      • Re: Zeroing dials - setting amount of friction 'hold', MikeH_QB
      • Re: Zeroing dials - setting amount of friction 'hold', ravensworth2674
      • Re: Zeroing dials - setting amount of friction 'hold', Sandy Morton
      • Re: Zeroing dials - setting amount of friction 'hold', ravensworth2674
  • Re: Zeroing dials - setting amount of friction 'hold', _
  • Re: Zeroing dials - setting amount of friction 'hold', Adrian Godwin
  • Re: Zeroing dials - setting amount of friction 'hold', Jordan
    • Re: Zeroing dials - setting amount of friction 'hold', ravensworth2674
      • Re: Zeroing dials - setting amount of friction 'hold', Jordan
      • Re: Zeroing dials - setting amount of friction 'hold', ravensworth2674
  • Re: Zeroing dials - setting amount of friction 'hold', David Littlewood
  • Re: Zeroing dials - setting amount of friction 'hold', PG1D/PA-11?12
• For Mechanical stuff, Physlover
  • Re: For Mechanical stuff, Richard
    • Re: For Mechanical stuff, ravensworth2674
      • Re: For Mechanical stuff, Tony Jeffree
      • Re: For Mechanical stuff, ravensworth2674
      • Re: For Mechanical stuff, Dave Baker
      • Re: For Mechanical stuff, David Littlewood
      • Re: For Mechanical stuff, Dave Baker
      • Re: For Mechanical stuff, ravensworth2674
      • Re: For Mechanical stuff, David Littlewood
      • Re: For Mechanical stuff, Tony Jeffree
      • Re: For Mechanical stuff, Steve
      • Re: For Mechanical stuff, ravensworth2674
• FA: Sykes Stud Screw Extractor, nordenfeldt
• Ba tap query, Richard Edwards
• Boxford Cross Slide, rsss
  • Re: Boxford Cross Slide, Richard Edwards
    • Re: Boxford Cross Slide, mark
    • Re: Boxford Cross Slide, Richard
    • Re: Boxford Cross Slide, Richard
  • Re: Boxford Cross Slide, jontom_1uk
• Edinburgh Trip, Prepair Ltd
• Re: china wholesale cheap timberland boots UGG boots trainers gucci bossadidas shoes, daedaluscan
• This green and pleasant land ???, John Stevenson
  • Re: This green and pleasant land ???, Peter A Forbes
    • Re: This green and pleasant land ???, Adrian Godwin
      • Re: Re: This green and pleasant land ???, Peter A Forbes
      • Re: This green and pleasant land ???, Peter Neill
      • Re: This green and pleasant land ???, Adrian Godwin
      • Re: This green and pleasant land ???, John Stevenson
      • Re: This green and pleasant land ???, ChrisQuayle
      • Re: This green and pleasant land ???, John Stevenson
  • Message not available
    • Re: This green and pleasant land ???, Peter Fairbrother
      • Message not available
      • Re: This green and pleasant land ???, Peter Fairbrother
      • Re: This green and pleasant land ???, Peter Fairbrother
      • Re: This green and pleasant land ???, John Stevenson
  • Re: This green and pleasant land ???, Bob Minchin
  • Re: This green and pleasant land ???, Wayne Weedon
  • Re: This green and pleasant land ???, Mark Rand
    • Re: This green and pleasant land ???, ravensworth2674
  • Re: This green and pleasant land ???, David Powell
    • Re: This green and pleasant land ???, John Stevenson
      • Re: This green and pleasant land ???, David Powell
• Re: A word of warning, was:- ER40 Backplate mounted chuck, Allan Waterfall
  • Re: A word of warning, was:- ER40 Backplate mounted chuck, Peter Neill
  • <Possible follow-ups>
  • Re: A word of warning, was:- ER40 Backplate mounted chuck, Ketan Swali
    • Re: A word of warning, was:- ER40 Backplate mounted chuck, ACE
      • Message not available
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, ACE
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, John Stevenson
      • Message not available
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Peter Fairbrother
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Peter Fairbrother
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Dave Baker
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Tony Jeffree
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Dave Baker
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Boo
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Peter Fairbrother
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Dave Baker
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, David Littlewood
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Dave Baker
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Tony Jeffree
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Peter Fairbrother
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, David Littlewood
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, David Littlewood
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, David Littlewood
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Boo
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, P Riedie
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, David Littlewood
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Boo
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, P Riedie
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Ketan Swali
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, John Stevenson
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Peter Fairbrother
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Peter Fairbrother
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Mark Rand
      • Message not available
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Tony Jeffree
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Prepair Ltd
      • Message not available
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, John Stevenson
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Boo
      • Message not available
      • Message not available
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Tony Jeffree
• Re: A word of warning, was:- ER40 Backplate mounted chuck, Mark Rand
  • Re: A word of warning, was:- ER40 Backplate mounted chuck, Charles Ping
  • Message not available
    • Re: A word of warning, was:- ER40 Backplate mounted chuck, Bill
  • Re: A word of warning, was:- ER40 Backplate mounted chuck, Ketan Swali
    • Re: A word of warning, was:- ER40 Backplate mounted chuck, Peter Parry
  • <Possible follow-ups>
  • Re: A word of warning, was:- ER40 Backplate mounted chuck, Mark Rand
  • Re: A word of warning, was:- ER40 Backplate mounted chuck, Dave Baker
    • Re: A word of warning, was:- ER40 Backplate mounted chuck, Dave Baker
  • Re: A word of warning, was:- ER40 Backplate mounted chuck, Rich
    • Re: A word of warning, was:- ER40 Backplate mounted chuck, IEB
    • Message not available
      • Re: A word of warning, was:- ER40 Backplate mounted chuck, Dave Baker
    • Re: A word of warning, was:- ER40 Backplate mounted chuck, Ledz
• Colchester Student Lathe, Pete123456
  • Re: Colchester Student Lathe, Austin Shackles
  • Re: Colchester Student Lathe, Roland Craven
• Me DRO died [ R.I.P. ], John Stevenson
  • Re: Me DRO died [ R.I.P. ], mark
  • Re: Me DRO died [ R.I.P. ], dave sanderson
  • Re: Me DRO died [ R.I.P. ], Peter Neill
  • Re: Me DRO died [ R.I.P. ], Lester Caine
    • Re: Me DRO died [ R.I.P. ], John Stevenson
      • Re: Me DRO died [ R.I.P. ], jontom_1uk
      • Re: Me DRO died [ R.I.P. ], Charles Ping
      • Re: Me DRO died [ R.I.P. ], jontom_1uk
  • Re: Me DRO died [ R.I.P. ], David Littlewood
• Pinging C Ping., mark@xxxxxxxxxxxxxx
  • Re: Pinging C Ping., Charles Ping
• Bit OT - TIG Welder pedals, moray
  • Re: Bit OT - TIG Welder pedals, Cliff Ray
    • Re: Bit OT - TIG Welder pedals, moray
  • Re: Bit OT - TIG Welder pedals, Trevor Jones
    • Re: Bit OT - TIG Welder pedals, moray
• Syndanyo, Jim Hawkins
  • Re: Syndanyo, Peter Neill
  • Re: Syndanyo, Bob Minchin
  • Re: Syndanyo, mark@xxxxxxxxxxxxxx
• Key steel, campingstoveman
  • Re: Key steel, John Stevenson
    • Re: Key steel, campingstoveman
      • Re: Key steel, John Stevenson
      • Re: Key steel, campingstoveman
      • Re: Re: Key steel, Peter A Forbes
• Raising blocks, Cliff Coggin
  • Re: Raising blocks, jasonballamy
• Bantam Bearing Adjustment, Mr Crane
  • Re: Bantam Bearing Adjustment, Richard Edwards
    • Re: Bantam Bearing Adjustment, Mr Crane
      • Re: Bantam Bearing Adjustment, Richard Edwards
      • Re: Bantam Bearing Adjustment, Mr Crane
  • Re: Bantam Bearing Adjustment, Peter Neill
    • Re: Bantam Bearing Adjustment, Mr Crane
      • Re: Bantam Bearing Adjustment, Mark Rand
      • Re: Bantam Bearing Adjustment, John Stevenson
      • Re: Bantam Bearing Adjustment, Mr Crane
      • Re: Bantam Bearing Adjustment, Mark Rand
      • Re: Bantam Bearing Adjustment, Tony Jeffree
      • Re: Bantam Bearing Adjustment, Mr Crane
      • Re: Bantam Bearing Adjustment, Tony Jeffree
      • Re: Bantam Bearing Adjustment, Steve
      • Re: Bantam Bearing Adjustment, John Stevenson
  • Re: Bantam Bearing Adjustment, jontom_1uk
    • Re: Bantam Bearing Adjustment, Richard Edwards
    • Re: Bantam Bearing Adjustment, Mr Crane
      • Re: Bantam Bearing Adjustment, jontom_1uk
      • Re: Bantam Bearing Adjustment, Mr Crane
      • Re: Bantam Bearing Adjustment, David Littlewood
      • Re: Bantam Bearing Adjustment, Peter Neill
      • Re: Bantam Bearing Adjustment, jontom_1uk
      • Re: Bantam Bearing Adjustment, David Littlewood
      • Re: Bantam Bearing Adjustment, jontom_1uk
• Re: Offered: 1-ton floor crane (engine hoist), Charles Ping
  • <Possible follow-ups>
  • Re: Offered: 1-ton floor crane (engine hoist), Charles Ping
  • Re: Offered: 1-ton floor crane (engine hoist), Charles Ping
    • Re: Offered: 1-ton floor crane (engine hoist), Charles Ping
      • Message not available
      • Re: Offered: 1-ton floor crane (engine hoist), Brad.
  • Re: Offered: 1-ton floor crane (engine hoist), Mark Rand
    • Re: Offered: 1-ton floor crane (engine hoist), Austin Shackles
    • Message not available
      • Re: Offered: 1-ton floor crane (engine hoist), Mark Rand
• Myford turret attachment, Jazzman99
  • Re: Myford turret attachment, colin . wildgust
    • Re: Myford turret attachment, Jazzman99
      • Re: Myford turret attachment, Trevor Jones
  • Re: Myford turret attachment, steamer
    • Re: Myford turret attachment, Trevor Jones
    • Re: Myford turret attachment, David Littlewood
      • Re: Myford turret attachment, Jazzman99
      • Re: Myford turret attachment, Chris Edwards
• Whats the spindle taper on a Harrison M250 with D1-3 camlock spindle?, eddie
  • Re: Whats the spindle taper on a Harrison M250 with D1-3 camlock spindle?, Peter Neill
• Mill table accuracy, Alan Marshall
  • Re: Mill table accuracy, houstonceng
    • Re: Mill table accuracy, Alan Marshall
• Metric sized Aluminium supplier, dave sanderson
  • Re: Metric sized Aluminium supplier, Peter Neill
  • Re: Metric sized Aluminium supplier, colin . wildgust
    • Re: Metric sized Aluminium supplier, dave sanderson
• Milling Chamfer Tools, Richard Bradshaw
  • Re: Milling Chamfer Tools, Peter Neill
  • Re: Milling Chamfer Tools, mark
  • Re: Milling Chamfer Tools, Trevor Jones
    • Re: Milling Chamfer Tools, Adrian Godwin
      • Re: Milling Chamfer Tools, Trevor Jones
  • Re: Milling Chamfer Tools, Bill
  • Re: Milling Chamfer Tools, colin . wildgust
  • Re: Milling Chamfer Tools, Richard Bradshaw
  • Re: Milling Chamfer Tools, Chris Edwards
• Help with Myford chuck, daedaluscan
  • Re: Help with Myford chuck, Bob Minchin
    • Re: Help with Myford chuck, daedaluscan
• Threading question, grumpyat
  • <Possible follow-ups>
  • Threading question, grumpyat
  • Threading question, grumpyat
  • Threading question, grumpyat
  • Threading question, grumpyat
  • Re: Threading question, ravensworth2674
    • Re: Threading question, ravensworth2674
    • Re: Threading question, Dragon
      • Re: Threading question, ravensworth2674
      • Re: Threading question, Neil Ellwood
      • Re: Threading question, grumpyat
      • Re: Threading question, Dragon
      • Re: Threading question, Charles Ping
      • Re: Threading question, grumpyat
      • Re: Threading question, moray
      • Re: Threading question, Tony Jeffree
      • Re: Threading question, Sandy Morton
      • Re: Threading question, ravensworth2674
      • Re: Threading question, Austin Shackles
      • Re: Threading question, dave sanderson
      • Re: Threading question, Jazzman99
      • Re: Threading question, Steve
      • Re: Threading question, grumpyat
      • Re: Threading question, Steve
  • Re: Threading question, Pat Martindale
    • Re: Threading question, ravensworth2674
      • Re: Threading question, Alister Nicholls
      • Re: Threading question, Odie Ferrous
  • Re: Threading question, jackary
• Emco FB-2 angle plate wanted, Jordan
• HBM Lathe Chucks, David Everett
• R&M Bearings for grinder, hinkela2
  • Re: R&M Bearings for grinder, Ben
  • Re: R&M Bearings for grinder, Richard
• Medium Sized Milling Machine?, DR_G
  • Re: Medium Sized Milling Machine?, TRP
    • Re: Medium Sized Milling Machine?, Odie Ferrous
      • Re: Medium Sized Milling Machine?, DR_G
      • Re: Medium Sized Milling Machine?, Odie Ferrous
      • Re: Medium Sized Milling Machine?, Tony Jeffree
  • Re: Medium Sized Milling Machine?, Trevor Jones
    • Re: Medium Sized Milling Machine?, DR_G
      • Re: Medium Sized Milling Machine?, Trevor Jones
      • Re: Medium Sized Milling Machine?, Tony Jeffree
      • Re: Medium Sized Milling Machine?, Jordan
  • Re: Medium Sized Milling Machine?, AC
    • Re: Medium Sized Milling Machine?, DR_G
  • Re: Medium Sized Milling Machine?, Adrian Godwin
  • Re: Medium Sized Milling Machine?, NoSpam
    • Re: Medium Sized Milling Machine?, DR_G
      • Re: Medium Sized Milling Machine?, Adrian
      • Re: Medium Sized Milling Machine?, DR_G
      • Re: Medium Sized Milling Machine?, Richard Bradshaw
    • Re: Medium Sized Milling Machine?, Richard Bradshaw
• Re: Painting a lathe, Jazzman99
  • Re: Painting a lathe, Alan Bain
  • <Possible follow-ups>
  • Re: Painting a lathe, Adrian Godwin
    • Re: Painting a lathe, Adrian Godwin
• Re: Removing small roll pins, Christopher Tidy
  • Re: Removing small roll pins, Trevor Jones
    • Re: Removing small roll pins, Don Young
• Re: Looking for etched metal specimens (or possibly conc. nitric ?acid), Christopher Tidy
  • Re: Looking for etched metal specimens (or possibly conc. nitric ?acid), Adrian Godwin
• Re: Looking for etched metal specimens (or possibly conc. nitric acid), Christopher Tidy
  • <Possible follow-ups>
  • Re: Looking for etched metal specimens (or possibly conc. nitric acid), Christopher Tidy
• Re: Well, the world is certainly looking grim, isn't it? 85710, Chris Edwards
• OT: Red Arrows Banned from 2012 Olympics?, Steve
  • Re: OT: Red Arrows Banned from 2012 Olympics?, Tom
  • Re: OT: Red Arrows Banned from 2012 Olympics?, Boo
    • Re: OT: Red Arrows Banned from 2012 Olympics?, Trevor Jones
      • Re: OT: Red Arrows Banned from 2012 Olympics?, ravensworth2674
      • Re: OT: Red Arrows Banned from 2012 Olympics?, ravensworth2674
      • Re: OT: Red Arrows Banned from 2012 Olympics?, P Riedie
      • Re: OT: Red Arrows Banned from 2012 Olympics?, Boo
      • Re: OT: Red Arrows Banned from 2012 Olympics?, ravensworth2674
      • Re: OT: Red Arrows Banned from 2012 Olympics?, David Littlewood
      • Re: OT: Red Arrows Banned from 2012 Olympics?, ravensworth2674
      • Re: OT: Red Arrows Banned from 2012 Olympics?, Trevor Jones
  • <Possible follow-ups>
  • Re: OT: Red Arrows Banned from 2012 Olympics?, max
  • Re: OT: Red Arrows Banned from 2012 Olympics?, max
    • Re: OT: Red Arrows Banned from 2012 Olympics?, David Powell
      • Re: OT: Red Arrows Banned from 2012 Olympics?, Tom
• Bridgeport table drive parts, Emimec
  • Re: Bridgeport table drive parts, colin . wildgust
    • Re: Bridgeport table drive parts, Emimec
• Re: Runout on ER25Collet??, DR_G
  • Re: Runout on ER25Collet??, David Littlewood
    • Re: Runout on ER25Collet??, DR_G
• Re: Hy-Flo air pump overhaul, dazzer_up_nort
  • Re: Hy-Flo air pump overhaul, David Littlewood
    • Re: Hy-Flo air pump overhaul, dazzer_up_nort
• Re: How hard is "Hardened", Allan Waterfall
  • <Possible follow-ups>
  • Re: How hard is "Hardened", mike . crossfield
  • Re: How hard is "Hardened", Charles Lamont
• Re: Westbury boring head, Adrian Godwin
  • <Possible follow-ups>
  • Re: Westbury boring head, Adrian Godwin
    • Re: Westbury boring head, mike . crossfield
      • Re: Westbury boring head, Adrian Godwin
  • Re: Westbury boring head, Adrian Godwin
    • Re: Westbury boring head, Trevor Jones

• Security
• UNIX
• Linux
• Coding
• Usenet

• Archive
• About
• Privacy
• Search
• Imprint

newsgroups.derkeiler.com  > Archive  > Uk  > uk.rec.models.engineering  > 2008-02