Re: 10 BA (or 1.7mm) Countersunk Steel Screws?

Jim Ford wrote:
I'm trying to locate a small supply of the above - say 50-100 off. I've tried local model shops with no luck. A trawl on the net only found a supplier that would only deal with a minimum order of 1000 and £50.

Ideally they would be stainless philips head, but slotted steel would do.

1.6mm is a much more common size than 1.7mm.

US firm, but they are cheap - eg 50 1.6mm x 5mm c/s are $3.94

http://www.fastener-express.com/index.asp?PageAction=VIEWCATS&Category=388

-- Peter Fairbrother
.

Relevant Pages

  • Re: 10 BA (or 1.7mm) Countersunk Steel Screws?
    ... tried local model shops with no luck. ... A trawl on the net only found a ... supplier that would only deal with a minimum order of 1000 and £50. ...
    (uk.rec.models.engineering)
  • Re: 10 BA (or 1.7mm) Countersunk Steel Screws?
    ... A trawl on the net only found a ... supplier that would only deal with a minimum order of 1000 and £50. ... Modern Screws Ltd. ...
    (uk.rec.models.engineering)
  • Re: 10 BA (or 1.7mm) Countersunk Steel Screws?
    ... Jim Ford wrote: ... A trawl on the net only found a supplier that would only deal with a minimum order of 1000 and £50. ...
    (uk.rec.models.engineering)
  • Re: 10 BA (or 1.7mm) Countersunk Steel Screws?
    ... I've tried local model shops with no luck. ... A trawl on the net only ... found a supplier that would only deal with a minimum order of 1000 ...
    (uk.rec.models.engineering)
  • Re: pixma ip1500
    ... If so call Canon or your supplier and get them ... yes it is on warranty,my supplier is 50 miles away... ... called technical services and they basically thold him "bad luck" so he had ... i downloaded service toll for this printer do u know what will happen if i ...
    (comp.periphs.printers)