Re: 10 BA (or 1.7mm) Countersunk Steel Screws?

Jim Ford wrote:

I'm trying to locate a small supply of the above - say 50-100 off. I've tried local model shops with no luck. A trawl on the net only found a supplier that would only deal with a minimum order of 1000 and £50.

Ideally they would be stainless philips head, but slotted steel would do.

Jim Ford
Try here http://www.a2a4.co.uk/
they are very helpful and might have what you need or suggest a supplier.

hth

Bob
.

Relevant Pages

  • Re: 10 BA (or 1.7mm) Countersunk Steel Screws?
    ... A trawl on the net only found a ... supplier that would only deal with a minimum order of 1000 and £50. ... Modern Screws Ltd. ...
    (uk.rec.models.engineering)
  • Re: Model railway retailing
    ... Neither offered to special order and I got the ... I wouldn't necessarily criticise a retailer for taking this attitude, as it depends a lot on things like minimum order quantities and the reliablity of supplier deliveries. ... If a supplier imposes an unreasonably high carriage charge for orders below the minimum, or can't guarantee delivery times, then sometimes it simply isn't practical or financially viable to do special orders for customers. ...
    (uk.rec.models.rail)
  • Re: 10 BA (or 1.7mm) Countersunk Steel Screws?
    ... tried local model shops with no luck. ... A trawl on the net only found a ... supplier that would only deal with a minimum order of 1000 and £50. ...
    (uk.rec.models.engineering)
  • Re: 10 BA (or 1.7mm) Countersunk Steel Screws?
    ... tried local model shops with no luck. ... A trawl on the net only found a supplier that would only deal with a minimum order of 1000 and £50. ...
    (uk.rec.models.engineering)
  • Re: Thin Tufnol Sheet?
    ... Tufnol sheet - probably Carp brand. ... Jim Ford ... Try Gilbert Curry in Coventry. ... over the minimum order quantity. ...
    (uk.rec.models.engineering)