Re: Nice family house...


"Tony Jeffree" <tony@xxxxxxxxxxxxx> wrote in message
news:kk7bh3hh0dd4lm6q552ljkso2ve0ebk6dv@xxxxxxxxxx
On Tue, 16 Oct 2007 22:30:18 +0100, "Andrew Mawson"
<andrew@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

...blast ... missed that one ! Still, first two wagon loads now
shifted to my new place

When do you start on the mine shaft? <G>

Regards,
Tony

...hehe.. it would be a well where we're moving, our only 'neighbour'
is an unmanned water pumping station, which not only has the
advantages of no neighbour noise complaints, but also results in a
nice heavy duty three phase supply crossing my grounds !

AWEM

.

Relevant Pages

  • Re: dArsonval Meter Repair
    ... The repair involved freeing the moving coil/pointer shaft and gently ... moving it aside in order to fasten a few turns of the current coil ... I've got to put the shaft back. ... the shaft keeps jumping out of the bottom bearing. ...
    (sci.electronics.repair)
  • Re: May sound silly, but then it isnt my theory.
    ... The moving observers' clocks and measuring sticks are out ... Niether shaft will be helical wrt proper frame, however, and since the ...
    (sci.physics.relativity)
  • Re: dArsonval Meter Repair
    ... The repair involved freeing the moving coil/pointer shaft and gently ... I've got to put the shaft back. ... feel when the bottom bearing is seated (the change in shaft position is ... Can you drill out a piece of wooden dowel,an axial hole the ...
    (sci.electronics.repair)
  • Re: dArsonval Meter Repair
    ... The repair involved freeing the moving coil/pointer shaft and gently ... I managed to do all that without pulling the moving coil ... I've got to put the shaft back. ... feel when the bottom bearing is seated (the change in shaft position is ...
    (sci.electronics.repair)
  • dArsonval Meter Repair
    ... The repair involved freeing the moving coil/pointer shaft and gently ... I managed to do all that without pulling the moving coil ... I've got to put the shaft back. ... feel when the bottom bearing is seated (the change in shaft position is ...
    (sci.electronics.repair)
Loading