Re: Sizing Driveshafts


"Nick Mueller" <muellernick@xxxxxx> wrote in message
news:8817805.AUIT0f5290@xxxxxxxxxxx
Michael wrote:

Oh sorry - I wasn't looking for someone to give me a figure I was curious
as to the formula/rule of thumb.

No load RPM: 3350

Metric:
Torque: 4.248 Nm
Length 500mm

4 Nm? Do you have a max OD? I mean, 4Nm is nearly nothing. In terms of "I
pick this 20mm tube and it will work".


Nick

I'm trying to find the smallest OD I can get away with.

Thanks I'll look at that page. Every search I did with Google had
'driveshaft' in it somewhere.

Michael


.

Relevant Pages

  • Re: Sizing Driveshafts
    ... as to the formula/rule of thumb. ... No load RPM: 3350 ... Torque:  4.248 Nm ...
    (uk.rec.models.engineering)
  • Re: Sizing Driveshafts
    ... to the formula/rule of thumb. ... Torque: 4.248 Nm ... Afraid you will need to calculate again.37.6 lbft do not equal 4.248 ... Michael ...
    (uk.rec.models.engineering)
  • Re: Sizing Driveshafts
    ... On 29 May, 22:33, "Michael" ... to the formula/rule of thumb. ... Torque: 4.248 Nm ... Afraid you will need to calculate again.37.6 lbft do not equal 4.248 ...
    (uk.rec.models.engineering)
  • Re: water bath -- tightening lids
    ... of MN extension educator) to tighten with thumb and middle finger; ... that won't put too much torque on it. ...
    (rec.food.preserving)