Re: WTB - 110v Transformer

Tim,

Where are you?

Cheers

Peter

Tim Leech wrote:
On Sun, 10 Sep 2006 22:21:44 GMT, puffernutter
<peter@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:


Tim,

I'm using 110v as the power supply for the signalling on the LM&WR (see www.lmandwr.co.uk)

That transformer could be very useful (and return my yellow building site 240/110 transformer to its intended purpose!)

Is it still available?



Certainly, but you'll have to arrange collection.
I'll run a Megger over it to check before you get too excited, though
<g>

Cheers
Tim

Dutton Dry-Dock
Traditional & Modern canal craft repairs
Vintage diesel engine service
.

Relevant Pages

  • Re: Powerline modem
    ... >turned off by the power company, during periods of high demand, using a ... Note however that these systems use signalling frequencies of 200 Hz ... Bandwidth and other constraints limited ... at zone substations (signal passes through one transformer) or at grid ...
    (sci.electronics.design)
  • Re: WTB - 110v Transformer
    ... I'm using 110v as the power supply for the signalling on the LM&WR ... That transformer could be very useful (and return my yellow building site 240/110 transformer to its intended purpose!) ... Dutton Dry-Dock ...
    (uk.rec.models.engineering)