uk.rec.models.engineering

• Date Index

---

• ISO30 -> JT33 spindle adaptor, Andrew Mawson
  • Re: ISO30 -> JT33 spindle adaptor, mark
    • Re: ISO30 -> JT33 spindle adaptor, Tim Leech
      • Re: ISO30 -> JT33 spindle adaptor, mark
      • Re: ISO30 -> JT33 spindle adaptor, Andrew Mawson
      • Re: ISO30 -> JT33 spindle adaptor, Tim Leech
      • Re: ISO30 -> JT33 spindle adaptor, Andrew Mawson
      • Re: ISO30 -> JT33 spindle adaptor, mark
• Air driven spindle, Andrew Mawson
  • Re: Air driven spindle, John Stevenson
  • Re: Air driven spindle, Peter Neill
    • Re: Air driven spindle, Peter Neill
  • Re: Air driven spindle, Dave
  • Re: Air driven spindle, Ken & Chris Beardsell
    • Re: Air driven spindle, Andrew Mawson
• Tapping cast iron backplate question, mangled_us
  • Re: Tapping cast iron backplate question, John Stevenson
  • Re: Tapping cast iron backplate question, Bob Unitt
    • Re: Tapping cast iron backplate question, Mark Rand
  • Re: Tapping cast iron backplate question, Peter Neill
• Blacksmiths drills - any good ?, mangled_us
  • Re: Blacksmiths drills - any good ?, Prepair Ltd
• Taps, Steve
  • Re: Taps, John Stevenson
  • Re: Taps, Dave Baker
  • Re: Taps, Peter A Forbes
• Grinder Motor, Charles Ping
  • Re: Grinder Motor, Andrew Mawson
    • Re: Grinder Motor, John Stevenson
      • Re: Grinder Motor, Andrew Mawson
    • Re: Grinder Motor, Charles Ping
      • Re: Grinder Motor, Campingstoveman
      • Re: Grinder Motor, Charles Ping
    • Re: Re: Grinder Motor, Peter A Forbes
  • Re: Grinder Motor, Steve
    • Re: Grinder Motor, Mike Whittome
• Cheap Hoist, Kevin Steele
• Fritz Werner Vertical Mill, Peter Neill
  • Re: Fritz Werner Vertical Mill, mark
    • Re: Fritz Werner Vertical Mill, Peter Neill
      • Re: Fritz Werner Vertical Mill, mark
• G Scale Loco Plans, Kevin Steele
  • Re: G Scale Loco Plans, Mike H
    • Re: G Scale Loco Plans, Kevin Steele
      • Re: G Scale Loco Plans, Ken Parkes
  • Re: G Scale Loco Plans, mcgray
    • Re: G Scale Loco Plans, Kevin Steele
• re cutting wooden discs, Mark G
• parting-off, and concentricity, Peter Fairbrother
  • Re: parting-off, and concentricity, Martin Whybrow
    • Re: parting-off, and concentricity, Peter Fairbrother
      • Re: parting-off, and concentricity, Robin
• contour monitoring, jackosanonce
• sheet silicon to make hoses?, richard
  • Re: sheet silicon to make hoses?, Peter Neill
    • Re: sheet silicon to make hoses?, Peter Neill
      • Re: sheet silicon to make hoses?, Robin
    • Re: sheet silicon to make hoses?, Cliff Coggin
      • Re: sheet silicon to make hoses?, richard
      • Re: sheet silicon to make hoses?, Peter Neill
      • Re: sheet silicon to make hoses?, Kevin Steele
      • Re: sheet silicon to make hoses?, Peter Fairbrother
      • Re: sheet silicon to make hoses?, Cliff Coggin
      • Re: sheet silicon to make hoses?, Robin
      • Re: sheet silicon to make hoses?, Joules
      • Re: sheet silicon to make hoses?, Kelley Mascher
      • Re: sheet silicon to make hoses?, Andrew Mawson
      • Re: sheet silicon to make hoses?, Peter Neill
  • Re: sheet silicon to make hoses?, Brian Reay
    • Re: sheet silicon to make hoses?, richard
      • Re: sheet silicon to make hoses?, Brian Reay
      • Re: sheet silicon to make hoses?, richard
• Acme taps ?, John Stevenson
  • Re: Acme taps ?, Tom
  • Re: Acme taps ?, Martin Evans
    • Re: Acme taps ?, Lionel
      • Re: Acme taps ?, John Stevenson
      • Re: Acme taps ?, Martin Evans
• Machine Belt, KWC
  • Re: Machine Belt, Kevin Steele
  • Re: Machine Belt, Tony Jeffree
  • Re: Machine Belt, mark@xxxxxxxxxxxxxx
    • Re: Machine Belt, Tony Jeffree
      • Re: Machine Belt, John Stevenson
      • Re: Machine Belt, Tony Jeffree
  • Re: Machine Belt, Roland Craven
  • Re: Machine Belt, Charles Ping
• MIGHT BE AN INFORMATIVE ONE!!!!, arem_29
  • Re: MIGHT BE AN INFORMATIVE ONE!!!!, Mark Rand
• You want to see something good in engineering?, david
  • Re: You want to see something good in engineering?, Robin
• Photographing models, Henry Springer
  • Re: Photographing models, John Stevenson
    • Re: Photographing models, Henry Springer
• Raglan, Kevin Steele
  • Re: Raglan, Arthur G
• tools for cutting into faces, Peter Fairbrother
  • Re: tools for cutting into faces, Alan Marshall
    • Re: tools for cutting into faces, Charles
• Cutting Wooden Discs, Michael
  • Re: Cutting Wooden Discs, Tim Auton
  • Re: Cutting Wooden Discs, Jim Guthrie
    • Re: Cutting Wooden Discs, bugbear
  • Re: Cutting Wooden Discs, bugbear
    • Re: Cutting Wooden Discs, Michael
      • Re: Cutting Wooden Discs, Norman Billingham
      • Re: Cutting Wooden Discs, Michael
      • Re: Cutting Wooden Discs, Norman Billingham
      • Re: Cutting Wooden Discs, Michael
      • Re: Cutting Wooden Discs, Norman Billingham
• A yellow metal ring, Mike H
  • Re: A yellow metal ring, david . burrage
    • Re: A yellow metal ring, Mike H
      • Re: A yellow metal ring, david . burrage
      • Re: A yellow metal ring, Mike H
      • Re: A yellow metal ring, david . burrage
• diamond cut-off wheels?, Peter Fairbrother
  • Re: diamond cut-off wheels?, Kevin Steele
  • Re: diamond cut-off wheels?, Tony Jeffree
  • Re: diamond cut-off wheels?, Cliff Coggin
    • Re: diamond cut-off wheels?, Peter Fairbrother
      • Re: diamond cut-off wheels?, John Stevenson
      • Re: diamond cut-off wheels?, Peter Fairbrother
      • Re: diamond cut-off wheels?, Cliff Coggin
      • Re: diamond cut-off wheels?, Dave Baker
  • Re: diamond cut-off wheels?, John Ambler
  • Re: diamond cut-off wheels?, Dave Baker
• Ortec Website, paul . morrey
  • Re: Ortec Website, Gary Wooding
  • Re: Ortec Website, John Stevenson
• Machine Tool Maintenance, christopher
  • Re: Machine Tool Maintenance, richard
  • Re: Machine Tool Maintenance, Charles Ping
    • Re: Machine Tool Maintenance, christopher
• Power Hacksaw or Bandsaw?, Peter
  • Re: Power Hacksaw or Bandsaw?, Kevin Steele
    • Re: Power Hacksaw or Bandsaw?, Tony Jeffree
    • Re: Power Hacksaw or Bandsaw?, Peter
      • Re: Power Hacksaw or Bandsaw?, Norman Billingham
      • Re: Power Hacksaw or Bandsaw?, Alan Marshall
  • Re: Power Hacksaw or Bandsaw?, Jonathan Barnes
• Rollers, Charles Ping
  • Re: Rollers, christopher
  • Re: Rollers, Duncan Munro
    • Re: Rollers, Charles Ping
  • Re: Rollers, John Stevenson
    • Re: Rollers, richard
• Emco Compact 5 PC Lathe, Ovenpaa
  • Re: Emco Compact 5 PC Lathe, Peter
    • Re: Emco Compact 5 PC Lathe, Ovenpaa
  • Re: Emco Compact 5 PC Lathe, Kevin Heyes
• bore guages, Dave
  • Re: bore guages, Andrew Mawson
    • Re: bore guages, Tim Leech
    • Re: bore guages, Dave
      • Re: bore guages, Mark Rand
      • Re: bore guages, Dave
  • Message not available
    • Re: bore guages, briano
      • Re: bore guages, Dave
• bristol mee, Peter Fairbrother
  • Re: bristol mee, John Stevenson
    • Re: bristol mee, Tony Jeffree
      • Re: bristol mee, John Stevenson
      • Re: bristol mee, Alan Marshall
• Free to good (or bad) home, Cliff Ray
  • Re: Free to good (or bad) home, Myford Matt
    • Re: Free to good (or bad) home, Cliff Ray
      • Re: Free to good (or bad) home, Myford Matt
      • Re: Free to good (or bad) home, Cliff Ray
• Myford and Boxford changegears question, mangled_us
  • Re: Myford and Boxford changegears question, John Stevenson
    • Re: Myford and Boxford changegears question, mangled_us
      • Re: Myford and Boxford changegears question, John Stevenson
      • Re: Myford and Boxford changegears question, mangled_us
      • Re: Myford and Boxford changegears question, Tony Jeffree
      • Re: Myford and Boxford changegears question, mangled_us
• Taken the Plunge, Peter
  • Re: Taken the Plunge, John Stevenson
    • Re: Taken the Plunge, Peter
      • Re: Taken the Plunge, Charles Ping
      • Re: Taken the Plunge, Campingstoveman
      • Re: Taken the Plunge, Peter
      • Re: Taken the Plunge, Joules
      • Re: Taken the Plunge, John Stevenson
      • Re: Taken the Plunge, Peter
      • Re: Taken the Plunge, bugbear
      • Re: Taken the Plunge, John Stevenson
      • Re: Taken the Plunge, Prepair Ltd
      • Re: Taken the Plunge, John Stevenson
      • Re: Taken the Plunge, Alan Marshall
      • Re: Taken the Plunge, Mark Rand
      • Re: Taken the Plunge, Mike Whittome
      • Re: Re: Taken the Plunge, Peter A Forbes
      • Re: Taken the Plunge, Nigel Eaton
      • Re: Taken the Plunge, Peter Neill
      • Re: Taken the Plunge, John Stevenson
      • Re: Taken the Plunge, Peter
      • Re: Taken the Plunge, Joules
      • Re: Taken the Plunge, Campingstoveman
      • Re: Taken the Plunge, Jonathan Barnes
      • Re: Taken the Plunge, Kevin Steele
      • Re: Taken the Plunge, Peter
      • Re: CAD and plans ( was: Taken the Plunge ), Jonathan Barnes
• 1st Class service from chester, Nick Holden
  • Re: 1st Class service from chester, Peter
    • Re: 1st Class service from chester, mangled_us
      • Re: 1st Class service from chester, Peter
      • Re: 1st Class service from chester, mark . howard10
      • Re: 1st Class service from chester, mangled_us
      • Re: 1st Class service from chester, Peter
      • Re: 1st Class service from chester, Mark Rand
      • Re: 1st Class service from chester, Joules
• End Mill / Slot Drill sets, mangled_us
  • Re: End Mill / Slot Drill sets, Norman Billingham
    • Re: End Mill / Slot Drill sets, Steve
• Supplier of small quantities of Al 7075, mangled_us
  • Re: Supplier of small quantities of Al 7075, Charles
  • Re: Supplier of small quantities of Al 7075, Charles
• hemmingway kit for low speed drive for VMC mill question, mangled_us
  • Re: hemmingway kit for low speed drive for VMC mill question, Myford Matt
    • Re: hemmingway kit for low speed drive for VMC mill question, Tim Christian
      • Re: hemmingway kit for low speed drive for VMC mill question, mangled_us
      • Re: hemmingway kit for low speed drive for VMC mill question, Tim Christian
      • Re: hemmingway kit for low speed drive for VMC mill question, Steve
      • Re: hemmingway kit for low speed drive for VMC mill question, Joules
    • Re: hemmingway kit for low speed drive for VMC mill question, mangled_us
      • Re: hemmingway kit for low speed drive for VMC mill question, Steve
      • Re: hemmingway kit for low speed drive for VMC mill question, mangled_us
      • Re: hemmingway kit for low speed drive for VMC mill question, Peter Neill
• metals and colour coding, mark
  • Re: metals and colour coding, Kevin Steele
    • Re: metals and colour coding, John Stevenson
  • Re: metals and colour coding, Tim Leech
    • Re: metals and colour coding, John Stevenson
  • Re: metals and colour coding, mark
• Wazza 'Dwang'?, Bob Minchin
  • Re: Wazza 'Dwang'?, mark@xxxxxxxxxxxxxx
    • Re: Wazza 'Dwang'?, Bob Minchin
      • Re: Wazza 'Dwang'?, briano
  • Re: Wazza 'Dwang'?, speedy
    • Re: Wazza 'Dwang'?, briano
• WTB 40 Int Arbour, Charles Ping
  • Re: WTB 40 Int Arbour, Prepair Ltd
    • Re: Re: WTB 40 Int Arbour, Peter A Forbes
      • Re: WTB 40 Int Arbour, Charles Ping
      • Re: Re: WTB 40 Int Arbour, Peter A Forbes
• Gears, Michael
  • Re: Gears, Neil Ellwood
  • Re: Gears, Cliff Coggin
    • Re: Gears, Mark Rand
• Gear cutters wanted, Alan Marshall
  • Re: Gear cutters wanted, John Stevenson
    • Re: Gear cutters wanted, Alan Marshall
• Cream Crackers anyone ??, John Stevenson
  • Re: Cream Crackers anyone ??, Steve
  • Re: Cream Crackers anyone ??, Tim Leech
    • Re: Cream Crackers anyone ??, Charles
      • Re: Cream Crackers anyone ??, Myford Matt
      • Re: Cream Crackers anyone ??, Charles
    • Re: Cream Crackers anyone ??, John Stevenson
  • Re: Cream Crackers anyone ??, Mark Rand
    • Re: Cream Crackers anyone ??, speedy
  • Re: Cream Crackers anyone ??, Dave Jones
• De-humidifiers, Bill
  • Re: De-humidifiers, Peter A Forbes
  • Re: De-humidifiers, Mike D
    • Re: De-humidifiers, Imat LaRoche-Guyon
  • Re: De-humidifiers, Mark W
  • Re: De-humidifiers, Rich
  • Re: De-humidifiers, Steve
    • Re: De-humidifiers, Don Brown
      • Re: De-humidifiers, Cliff Coggin
      • Re: De-humidifiers, Don Valentine
      • Re: De-humidifiers, Imat LaRoche-Guyon
      • Re: De-humidifiers, Steve
      • Re: De-humidifiers, Joules
      • Re: De-humidifiers, speedy
      • Re: De-humidifiers, Andrew Mawson
      • Re: De-humidifiers, Cliff Coggin
      • Re: De-humidifiers, Mark Rand
• FS - Mill, Charles Ping
• Progress on the workshop, at last, Mark Rand
  • Re: Progress on the workshop, at last, Kevin Steele
    • Re: Progress on the workshop, at last, Mark Rand
      • Re: Progress on the workshop, at last, Tony Jeffree
      • Re: Progress on the workshop, at last, Mark Rand
      • Re: Progress on the workshop, at last, Bob Minchin
      • Re: Progress on the workshop, at last, Mark Rand
      • Re: Progress on the workshop, at last, Bob Minchin
      • Re: Progress on the workshop, at last, Mark Rand
      • Re: Progress on the workshop, at last, Charles
      • Re: Progress on the workshop, at last, Joules
      • Re: Progress on the workshop, at last, Tony Jeffree
      • Re: Progress on the workshop, at last, Neil Ellwood
      • Re: Progress on the workshop, at last, Tony Jeffree
      • Re: Progress on the workshop, at last, Neil Ellwood
      • Re: Progress on the workshop, at last, Tony Jeffree
  • Re: Progress on the workshop, at last, Simon D
    • Re: Progress on the workshop, at last, Mark Rand
• Re: Jet engine design question, rsss
  • <Possible follow-ups>
  • Re: Jet engine design question, rsss
• Milling R/C Servo parts and horns. What material?, Matthias Melcher
  • Re: Milling R/C Servo parts and horns. What material?, Pete Keillor
    • Re: Milling R/C Servo parts and horns. What material?, Matthias Melcher
      • Re: Milling R/C Servo parts and horns. What material?, Newshound
      • Re: Milling R/C Servo parts and horns. What material?, Matthias Melcher
      • Re: Milling R/C Servo parts and horns. What material?, Newshound
      • Re: Milling R/C Servo parts and horns. What material?, Matthias Melcher
• chinese minimill prices, Peter Fairbrother
  • Re: chinese minimill prices, Peter Fairbrother
    • Re: chinese minimill prices, Robin
    • Re: chinese minimill prices, John Stevenson
  • Re: chinese minimill prices, Ketan Swali
    • Re: chinese minimill prices, Steam Train Dave
      • Re: chinese minimill prices, Tony Jeffree
      • Re: chinese minimill prices, John Stevenson
      • Re: chinese minimill prices, Ketan Swali
      • Re: chinese minimill prices, John Stevenson
      • Re: chinese minimill prices, Mark Rand
      • Re: chinese minimill prices, Kevin Steele
      • Re: chinese minimill prices, Ketan Swali
      • Re: chinese minimill prices, Ketan Swali
• Drill sharpener, Robin
• Making quick release fasteners, Robin
• Repairing cast iron, Robin
  • Re: Repairing cast iron, Stephen Howard
  • Re: Repairing cast iron, Kevin Steele
    • Re: Repairing cast iron, Robin
      • Re: Repairing cast iron, Andrew Mawson
      • Re: Repairing cast iron, Robin
      • Re: Repairing cast iron, Stephen Howard
      • Re: Repairing cast iron, Mike H
      • Re: Repairing cast iron, Charles
  • Re: Repairing cast iron, John Stevenson
    • Re: Repairing cast iron, Robin
• How old is my Myford?, Robin
  • Re: How old is my Myford?, Alan Marshall
• Wanted: Stand for Myford Super 7, creffield
  • Re: Wanted: Stand for Myford Super 7, Alan Marshall
    • Re: Wanted: Stand for Myford Super 7, Robin
• Dremel, John Curzon
  • Re: Dremel, John Stevenson
  • Re: Dremel, Stephen Howard
  • Re: Dremel, J
    • Re: Dremel, Kevin Steele
• Myford backplate fitting problems, Martin Whybrow
  • Re: Myford backplate fitting problems, Andrew Mawson
    • Re: Myford backplate fitting problems, jontom_1uk
      • Re: Myford backplate fitting problems, Martin Whybrow
      • Re: Myford backplate fitting problems - update, Martin Whybrow
      • Re: Myford backplate fitting problems - update, Kevin Steele
      • Re: Myford backplate fitting problems - update, Martin Whybrow
      • Re: Myford backplate fitting problems - update, jontom_1uk
      • Re: Myford backplate fitting problems - update, Ketan Swali
      • Re: Myford backplate fitting problems - update, Martin Whybrow
      • Re: Myford backplate fitting problems - update, John Stevenson
      • Re: Myford backplate fitting problems - update, Ketan Swali
      • Re: Myford backplate fitting problems - update, Martin Whybrow
      • Re: Myford backplate fitting problems - update, John Stevenson
      • Re: Myford backplate fitting problems - update, Martin Whybrow
      • Re: Myford backplate fitting problems - update, Ken Parkes
      • Re: Myford backplate fitting problems - update, Jonathan Barnes
• Bending rolls for material 3mm wide, Ian Phillips
  • Re: Bending rolls for material 3mm wide, mark
• Brazing long 6mm copper tubes, Andrew Mawson
  • Re: Brazing long 6mm copper tubes, Ian Phillips
    • Re: Brazing long 6mm copper tubes, Andrew Mawson
      • Re: Brazing long 6mm copper tubes, Ian Phillips
      • Re: Brazing long 6mm copper tubes, Clive Dive
      • Re: Brazing long 6mm copper tubes, Mike H
      • Re: Brazing long 6mm copper tubes, John Stevenson
      • Re: Brazing long 6mm copper tubes, Andrew Mawson
      • Re: Brazing long 6mm copper tubes, John Stevenson
      • Re: Brazing long 6mm copper tubes, Mike H
  • Re: Brazing long 6mm copper tubes, Don Young
  • Re: Brazing long 6mm copper tubes, Mark G
    • Re: Brazing long 6mm copper tubes, Andrew Mawson
      • Re: Brazing long 6mm copper tubes, pentagrid
      • Re: Brazing long 6mm copper tubes, Andrew Mawson
      • Re: Brazing long 6mm copper tubes, pentagrid
  • Re: Brazing long 6mm copper tubes, rsss
    • Re: Brazing long 6mm copper tubes, Andrew Mawson
      • Re: Brazing long 6mm copper tubes, Ian Phillips
      • Re: Brazing long 6mm copper tubes, Andrew Mawson
      • Re: Brazing long 6mm copper tubes, Mark Rand
• Tiny boring bar?, Peter Fairbrother
  • Re: Tiny boring bar?, mangled_us
    • Re: Tiny boring bar?, Peter Fairbrother
      • Re: Tiny boring bar?, pentagrid
  • Re: Tiny boring bar?, JG
    • Re: Tiny boring bar?, kfbz87qhwaa
  • Re: Tiny boring bar?, Ian Phillips
  • Re: Tiny boring bar?, Dick Gays
    • Re: Tiny boring bar?, Kevin Steele
      • Re: Tiny boring bar?, Cliff Coggin
      • Re: Tiny boring bar?, Myford Matt
      • Re: Tiny boring bar?, Peter Fairbrother
  • Re: Tiny boring bar?, rlincolnh
• Bridgeport Clones - buying Tips, jontom_1uk
• Choosing reamers - please help, Myford Matt
  • Re: Choosing reamers - please help, briano
    • Re: Choosing reamers - please help, Myford Matt
      • Re: Choosing reamers - please help, briano
  • Re: Choosing reamers - please help, Dave Baker
• Stelram tool tips, Russell Eberhardt
  • Re: Stelram tool tips, Lionel
    • Re: Stelram tool tips - Millhill Supplies, brian
      • Re: Stelram tool tips - Millhill Supplies, brian
      • Re: Stelram tool tips - Millhill Supplies, hyweldavies
      • Re: Stelram tool tips - Millhill Supplies, Lionel
      • Re: Stelram tool tips - Millhill Supplies, Russell Eberhardt
    • Re: Stelram tool tips, Russell Eberhardt
• Model Locomotive Wheels, Russell Eberhardt
  • Re: Model Locomotive Wheels, Charles
    • Re: Model Locomotive Wheels, Mike H
      • Re: Model Locomotive Wheels, Charles
    • Re: Model Locomotive Wheels, Charles
    • Re: Model Locomotive Wheels, Russell Eberhardt
• Lathe & Mill update, Nick Holden
• Electric Motor Required, Michael
  • Re: Electric Motor Required, Peter Fairbrother
• ME Exhibitions?, Peter Fairbrother
  • Re: ME Exhibitions?, brian
    • Re: ME Exhibitions?, Newshound
• Depth micrometer usage, Malcolm Stewart
  • Re: Depth micrometer usage, Cliff Coggin
  • Re: Depth micrometer usage, pentagrid
  • Re: Depth micrometer usage, Malcolm Stewart
    • Re: Depth micrometer usage, Pete
      • Re: Depth micrometer usage, Malcolm Stewart
• Milling Vice for VMC, mangled_us
  • Re: Milling Vice for VMC, Norman Billingham
    • Re: Milling Vice for VMC, mangled_us
      • Re: Milling Vice for VMC, Norman Billingham
      • Re: Milling Vice for VMC, John Stevenson
  • Re: Milling Vice for VMC, Kevin Steele
• New Hobby, Kevin Steele
  • Re: New Hobby, Prepair Ltd
  • Re: New Hobby, Peter Parry
    • Re: New Hobby, Tony Jeffree
• Home at Last, Kevin Steele
  • Re: Home at Last, mark
    • Re: Home at Last, Kevin Steele
      • Re: Home at Last, mark
    • Re: Home at Last, Dave Brook
      • Re: Home at Last, mark
  • Re: Home at Last, John Stevenson
    • Re: Home at Last, Kevin Steele
      • Re: Home at Last, Mark Rand
      • Re: Home at Last, Kevin Steele
      • Re: Home at Last, Jonathan Barnes
• Re: WANT SOME FREE CASH ???, dvant_nz
• Modelling Foam, Michael
  • Re: Modelling Foam, Chris Eilbeck
• Import Quality, John Stevenson
• denford orac, rsss
• Where can I mill and turn?, antony . adshead
  • Re: Where can I mill and turn?, rsss
• Left hand taps, dies, bugbear
  • Re: Left hand taps, dies, Joules
    • Re: Left hand taps, dies, bugbear
  • Re: Left hand taps, dies, John Montrose
    • Re: Left hand taps, dies, bugbear
      • Re: Left hand taps, dies, Arthur G
      • Re: Left hand taps, dies, Andrew Mawson
      • Re: Left hand taps, dies, Martin Evans
      • Re: Left hand taps, dies, Mark Rand
      • Re: Left hand taps, dies, John Stevenson
      • Re: Left hand taps, dies, bugbear
    • Re: Left hand taps, dies, Kevin Steele
  • Re: Left hand taps, dies, Don Young
  • Re: Left hand taps, dies, briano
    • Re: Left hand taps, dies, bugbear
      • Re: Left hand taps, dies, briano
• Re: MAKE MONEY FAST, EASY AND LEGALLY!, mode1
• Tinplate, Phil Cross
  • Re: Tinplate, Don Valentine
    • Re: Tinplate, Joules
  • Re: Tinplate, Phil Cross
    • Re: Tinplate, Andrew Mawson
      • Re: Tinplate, Phil Cross
• 'Brass' v 'Cycle' thread standards, Ian Phillips
  • Re: 'Brass' v 'Cycle' thread standards, John Stevenson
  • Re: 'Brass' v 'Cycle' thread standards, John Montrose
• Material Recommendation, JG
  • Re: Material Recommendation, John Stevenson
    • Re: Material Recommendation, JG
      • Re: Material Recommendation, John Stevenson
  • Re: Material Recommendation, Neil Barnes
  • Re: Material Recommendation, Steve R.
• Chain Hoist, Kevin Steele
  • Re: Chain Hoist, John Montrose
• How can I do this?, Peter Fairbrother
  • Re: How can I do this?, Peter Fairbrother
    • Re: How can I do this?, kfbz87qhwaa
      • Re: How can I do this?, Peter Fairbrother
    • Re: How can I do this?, Alan Marshall
      • Re: How can I do this?, Peter Fairbrother
      • Re: How can I do this?, Mark Rand
      • Re: How can I do this?, Peter Fairbrother
      • Re: How can I do this?, Mark Rand
      • Re: How can I do this?, Peter Fairbrother
  • Re: How can I do this?, rsss
    • Re: How can I do this?, Robin
      • Re: How can I do this?, Peter Fairbrother
      • Re: How can I do this?, Robin
      • Re: How can I do this?, Robin
      • Re: How can I do this?, Robin
      • Re: How can I do this?, Robin
    • Re: How can I do this?, Robin
      • Re: How can I do this?, Robin
• Chester920 lathe, Bill
  • Re: Chester920 lathe, Wally
    • Re: Chester920 lathe, Tim Christian
      • Re: Chester920 lathe, Wally
      • Re: Chester920 lathe, John Stevenson
      • Re: Chester920 lathe, Polymath
      • Re: Chester920 lathe, Tim Christian
• Bench drill free to good home, John Stevenson
  • Message not available
    • Re: Bench drill free to good home, John Stevenson
• Re: Centec 2a vertical head, ukteddy
• Centec 2A milling machine, ukteddy
  • Re: Centec 2A milling machine, Jim Guthrie
    • Re: Centec 2A milling machine, John Montrose
      • Re: Centec 2A milling machine, Dick Ganderton
  • Re:Centec 2A milling machine, sidney george brian swann
• Starter Lathe, Michael
  • Re: Starter Lathe, Joules
    • Re: Starter Lathe, Michael
      • Re: Starter Lathe, Joules
• Starrett centre & Edge finder, Mark W
  • Re: Starrett centre & Edge finder, Guy Griffin
    • Re: Starrett centre & Edge finder, Mark W
• Myford Rodney - maximum speed ?, oldlock
• Looking for fibreglass tape, Martin Whybrow
  • Re: Looking for fibreglass tape, Tim Leech
  • Re: Looking for fibreglass tape, Peter A Forbes
  • Re: Looking for fibreglass tape, Peter A Forbes
    • Re: Looking for fibreglass tape, Martin Whybrow
      • Re: Looking for fibreglass tape, Peter A Forbes
      • Re: Looking for fibreglass tape, Martin Whybrow
      • Re: Looking for fibreglass tape, Prepair Ltd
      • Re: Looking for fibreglass tape, Prepair Ltd
      • Re: Looking for fibreglass tape, Martin Whybrow
      • Re: Looking for fibreglass tape, Peter A Forbes
• 40mm wad punch, Norman Billingham
  • Re: 40mm wad punch, Joules
• Elliot Sturdimill, windymiller
  • Re: Elliot Sturdimill, Martin Whybrow
    • Re: Elliot Sturdimill, windymiller
      • Re: Elliot Sturdimill, Martin Whybrow
• Myford Headstock, Bill
• Re: Gadget Poll, Newshound
  • Re: Gadget Poll, briano
• Gauge one, Campingstoveman
  • Re: Gauge one, bolmas
    • Re: Gauge one, Campingstoveman
      • Re: Gauge one, Kevin Steele
  • Re: Gauge one, Mike H
    • Re: Gauge one, bolmas
• Re: free X-CAD software, fz1
• Part for Raglan Littlejohn required, Prepair Ltd
  • Re: Part for Raglan Littlejohn required, Charles Ping
• Elliott UO Mill, Charles Ping
• OT: the Model Wheelwright, mcgray
  • Re: the Model Wheelwright, Mike D
    • Re: the Model Wheelwright, Peter Scales
      • Re: the Model Wheelwright, mcgray
• sort of OT - where to buy metals?, antony . adshead
  • Re: sort of OT - where to buy metals?, Peter A Forbes
  • Re: sort of OT - where to buy metals?, John Montrose
    • Re: sort of OT - where to buy metals?, Dick Ganderton
      • Re: sort of OT - where to buy metals?, antony . adshead
  • Re: sort of OT - where to buy metals?, Charles Ping
    • Re: sort of OT - where to buy metals?, Duncan Munro
• lidl digital caliper next Monday, Geo
  • Re: lidl digital caliper next Monday, Adrian Godwin
    • Re: lidl digital caliper next Monday, Mike Whittome
      • Re: lidl digital caliper next Monday, Adrian Godwin
  • Message not available
    • Re: lidl digital caliper next Monday, Maurice
  • Re: lidl digital caliper next Monday, Russell Eberhardt
    • Re: lidl digital caliper next Monday, Don Valentine
      • Re: lidl digital caliper next Monday, Brian Reay
      • Re: lidl digital caliper next Monday, Henry Springer
      • Re: lidl digital caliper next Monday, Peter Sheppard
      • Re: lidl digital caliper next Monday, Joules
      • Re: lidl digital caliper next Monday, Henry Springer
      • Re: lidl digital caliper next Monday, Kevin Steele
      • Re: lidl digital caliper next Monday, Peter Fairbrother
      • Re: lidl digital caliper next Monday, Mike Whittome
      • Re: lidl digital caliper next Monday, Bob Minchin
      • Re: lidl digital caliper next Monday, John Stevenson
      • Re: lidl digital caliper next Monday -now local to Trowbridge, Peter Sheppard
      • Re: lidl digital caliper next Monday -now local to Trowbridge, Peter Fairbrother
• training DVD, Harry Wheeldon
  • Re: training DVD, mark
• Lathe & Mill, Nick Holden
  • Re: Lathe & Mill, Charles Ping
    • Re: Lathe & Mill, Tim Christian
      • Re: Lathe & Mill, bolmas
  • Re: Lathe & Mill, Paul swindell
    • Re: Lathe & Mill, Steve
      • Re: Lathe & Mill, mark . howard10
      • Re: Lathe & Mill, Tim Christian
  • Re: Lathe & Mill, mark . howard10
  • Re: Lathe & Mill, John Stevenson
    • Re: Lathe & Mill, Donald
      • Re: Lathe & Mill, jontom_1uk
      • Re: Lathe & Mill, John Stevenson
      • Re: Lathe & Mill, Mark Rand
      • Re: Lathe & Mill, John Stevenson
      • Re: Lathe & Mill, jontom_1uk
      • Re: Lathe & Mill, jontom_1uk
      • Re: Lathe & Mill, John Stevenson
      • Re: Lathe & Mill, do . not . waste . your . time . emailing . me
      • Re: Lathe & Mill, Steve
      • Re: Lathe & Mill, Kevin Steele
      • Re: Lathe & Mill, Tim Christian
      • Re: Lathe & Mill, Kevin Steele
      • Re: Lathe & Mill, Polymath
      • Re: Lathe & Mill, Kevin Steele
      • Re: Lathe & Mill, Tim Christian
      • Re: Lathe & Mill, Polymath
      • Re: Lathe & Mill, Tim Christian
      • Re: Lathe & Mill, Polymath
      • Re: Lathe & Mill, Tim Christian
      • Re: Lathe & Mill, Polymath
      • Re: Lathe & Mill, Tim Christian
      • Re: Lathe & Mill, Peter A Forbes
      • Re: Lathe & Mill, Mike Whittome
      • Re: Lathe & Mill, Peter A Forbes
      • Re: Lathe & Mill, Tim Christian
  • Re: Lathe & Mill, Gary Wooding
  • Re: Lathe & Mill, paul . morrey
    • Re: Lathe & Mill, Kevin Steele
    • Re: Lathe & Mill, Tim Christian
      • Re: Lathe & Mill, Joules
      • Re: Lathe & Mill, Tim Christian
      • Re: Lathe & Mill, paul . morrey
      • Re: Lathe & Mill, Joules
      • Re: Lathe & Mill, paul . morrey
      • Re: Lathe & Mill, Joules
      • Re: Lathe & Mill, paul . morrey
• Stent T&C Grinder questions, Boo
  • Re: Stent T&C Grinder questions, Boo
    • Re: Stent T&C Grinder questions, Wayne Weedon
      • Re: Stent T&C Grinder questions, Boo
• Re: MT3 or R8, Boo
• Machine-DRO, mr machine-dro
  • Re: Machine-DRO, Doug Ball
• Fitting torrington bearings, EF
  • Re: Fitting torrington bearings, Peter A Forbes
  • Re: Fitting torrington bearings, R L Driver
• Re: Do you like these wristwatch?, Neil Ellwood
  • <Possible follow-ups>
  • Re: Do you like these wristwatch?, David Morgan
  • Re: Do you like these wristwatch?, crwtar
• Clarkson autolock metric/imperial collets, Myford Matt
  • Re: Clarkson autolock metric/imperial collets, Peter A Forbes
  • Re: Clarkson autolock metric/imperial collets, Jim Guthrie
  • Re: Clarkson autolock metric/imperial collets, Myford Matt
• Shipping from the US to the UK., Joules
  • Re: Shipping from the US to the UK., Peter A Forbes
    • Re: Shipping from the US to the UK., Joules
• Isn't skip-diving great?, Nigel Eaton
• Pondering a mill, Boo
  • Re: Pondering a mill, Dave Baker
    • Re: Pondering a mill, Dick Ganderton
      • Re: Pondering a mill, Joules
      • Re: Pondering a mill, Dave Baker
      • Re: Pondering a mill, Roland Craven
  • Re: Pondering a mill, Bob Minchin
    • Re: Pondering a mill, brian
      • Re: Pondering a mill, jontom_1uk
      • Re: Pondering a mill, Maurice Hood
      • Re: Pondering a mill, Boo
      • Re: Pondering a mill, Bob Minchin
      • Re: Pondering a mill, brian
      • Re: Pondering a mill, Kevin Steele
      • Re: Pondering a mill, jontom_1uk
      • Re: Pondering a mill, mark . howard10
  • Re: Pondering a mill, mark . howard10
  • Re: Pondering a mill, John Stevenson
    • Re: Pondering a mill, Adrian Godwin
    • Re: Pondering a mill, jontom_1uk
      • Re: Pondering a mill, John Stevenson
      • Re: Pondering a mill, Peter A Forbes
      • Re: Pondering a mill, Mark Rand
      • Re: Pondering a mill, John Stevenson
      • Re: Pondering a mill, Rich
      • Re: Pondering a mill, John Stevenson
      • Re: Pondering a mill, jontom_1uk
      • Re: Pondering a mill, Charles Ping
      • Re: Pondering a mill, Charles Ping
      • Re: Pondering a mill, Prepair Ltd
• Where to buy large dia Perspex tube?, mike . crossfield
  • Re: Where to buy large dia Perspex tube?, Tony Jeffree
    • Re: Where to buy large dia Perspex tube?, mike . crossfield
      • Re: Where to buy large dia Perspex tube?, Stephen Howard
      • Re: Where to buy large dia Perspex tube?, mike . crossfield
      • Re: Where to buy large dia Perspex tube?, Stephen Howard
  • Re: Where to buy large dia Perspex tube?, Peter Scales
    • Re: Where to buy large dia Perspex tube?, Nigel Eaton
      • Re: Where to buy large dia Perspex tube?, mike . crossfield
  • Re: Where to buy large dia Perspex tube?, Peter A Forbes
  • Re: Where to buy large dia Perspex tube?, Tom
  • Re: Where to buy large dia Perspex tube?, Guy Griffin
  • Re: Where to buy large dia Perspex tube?, Ken Parkes
• HELP Boxford 125CTL, CHRISTOPHER ALLEN
  • Re: HELP Boxford 125CTL, Tony Jeffree
    • Re: HELP Boxford 125CTL, Dick Ganderton
      • Re: HELP Boxford 125CTL, Cliff Ray
      • Re: HELP Boxford 125CTL, CHRISTOPHER ALLEN
      • Re: HELP Boxford 125CTL, Tony Jeffree
• Heidenhain Help, Charles Ping
  • Re: Heidenhain Help, Duncan Munro
    • Re: Heidenhain Help, Charles Ping
      • Re: Heidenhain Help, stoogeweb
  • Re: Heidenhain Help, mark@xxxxxxxxxxxxxx
  • Re: Heidenhain Help, mark@xxxxxxxxxxxxxx
    • Re: Heidenhain Help, Charles Ping
• Off topic computer question., Steve Larner
  • Re: Off topic computer question., Martin Whybrow
    • Re: Off topic computer question., Joules
      • Re: Off topic computer question., amcnee
      • Re: Off topic computer question., Roger Smith
      • Re: Off topic computer question., JG
    • Re: Off topic computer question., Steve Larner
  • Re: Off topic computer question., Phil Thomas
• Odd Allan key size, Cliff Coggin
  • Re: Odd Allan key size, Peter A Forbes
    • Re: Odd Allan key size, Tim Leech
      • Re: Odd Allan key size, Cliff Coggin
      • Re: Odd Allan key size, Kevin Steele
      • Re: Odd Allan key size, Cliff Coggin
      • Re: Odd Allan key size, bolmas
      • Re: Odd Allan key size, Norman Billingham
  • Re: Odd Allan key size, brian
    • Re: Odd Allan key size, christopher
  • Re: Odd Allan key size, Brian Lambert
  • Re: Odd Allan key size, Anthony Britt
    • Re: Odd Allan key size, Cliff Coggin
• HSS boring / threading tool set, Boo
• torrington bearings, EF
  • Re: torrington bearings, Peter A Forbes
    • Re: torrington bearings, Newshound
  • Re: torrington bearings, Dick Gays
    • Re: torrington bearings, Kevin Steele
• Denford Orac - the next step, amcnee
  • Re: Denford Orac - the next step, Andrew Mawson
    • Re: Denford Orac - the next step, amcnee
      • Re: Denford Orac - the next step, Andrew Mawson
      • Re: Denford Orac - the next step, amcnee
      • Re: Denford Orac - the next step, Andrew Mawson
      • Re: Denford Orac - the next step, Boo
      • Re: Denford Orac - the next step, John Stevenson
  • Re: Denford Orac - the next step, amcnee
• titanium, Kevin Heyes
  • Re: titanium, larry90
    • Re: titanium, Newshound
  • Re: titanium, mark
  • Re: titanium, Peter Scales
• Slide valve timings, Alan Marshall
• Latest bit of kit!, Adrian Hodgson
  • Re: Latest bit of kit!, mark@xxxxxxxxxxxxxx
    • Re: Latest bit of kit!, Adrian Hodgson
      • Re: Latest bit of kit!, mark@xxxxxxxxxxxxxx
      • Re: Latest bit of kit!, Donald
• steel angle, Alan Marshall
  • Re: steel angle, Bob Minchin
    • Re: steel angle, Alan Marshall
• Jones & Shipman 540, Kevin Steele
  • Re: Jones & Shipman 540, Tim Leech
  • Re: Jones & Shipman 540, pentagrid
    • Re: Jones & Shipman 540, Tim Leech
      • Re: Jones & Shipman 540, Kevin Steele
  • Re: Jones & Shipman 540, mark
  • Re: Jones & Shipman 540, Kevin Steele
    • Re: Jones & Shipman 540, Andrew Mawson
• Re: Unusual optical device, Neil Ellwood
• OT Vent Axia fans, Andrew Mawson
  • Re: OT Vent Axia fans, John Stevenson
    • Re: OT Vent Axia fans, Tony Jeffree
      • Re: OT Vent Axia fans, Neil Ellwood
      • Re: OT Vent Axia fans, Tony Jeffree
      • Re: OT Vent Axia fans, g.harman
      • Re: OT Vent Axia fans, Bob Minchin
  • Re: OT Vent Axia fans, Prepair Ltd
    • Re: OT Vent Axia fans, Andrew Mawson
      • Re: OT Vent Axia fans, John Stevenson
      • Re: OT Vent Axia fans, Tony Jeffree
      • Re: OT Vent Axia fans, Peter A Forbes
      • Re: OT Vent Axia fans, Andrew Mawson
• Steam Engines & Boilers...HELP!!!, mtnmnstr
  • Re: Steam Engines & Boilers...HELP!!!, Mike H
    • Re: Steam Engines & Boilers...HELP!!!, mtnmnstr
  • Re: Steam Engines & Boilers...HELP!!!, do . not . waste . your . time . emailing . me
    • Re: Steam Engines & Boilers...HELP!!!, sherwood
  • Re: Steam Engines & Boilers...HELP!!!, Dick Ganderton
    • Re: Steam Engines & Boilers...HELP!!!, mtnmnstr
  • Re: Steam Engines & Boilers...HELP!!!, Roger Smith
• Harrison Uni Mill Wiring Diagram, Rich
  • Re: Harrison Uni Mill Wiring Diagram, moray
• Way OT - Canoe Building, Charles Ping
  • Re: Way OT - Canoe Building, Andrew Mawson
  • Re: Way OT - Canoe Building, Alan Holmes
    • Re: Way OT - Canoe Building, Joules
      • Re: Way OT - Canoe Building, Michael Hims
      • Re: Way OT - Canoe Building, Charles Ping
      • Re: Way OT - Canoe Building, Nigel Eaton
      • Re: Way OT - Canoe Building, John Stevenson
      • Re: Way OT - Canoe Building, Tony Jeffree
• An Unusual (to me) Chatter Problem, jontom_1uk
  • Re: An Unusual (to me) Chatter Problem, John Stevenson
    • Re: An Unusual (to me) Chatter Problem, jontom_1uk
      • Re: An Unusual (to me) Chatter Problem, jontom_1uk
  • Re: An Unusual (to me) Chatter Problem, John Montrose
    • Re: An Unusual (to me) Chatter Problem, jontom_1uk
      • Re: An Unusual (to me) Chatter Problem, Bob Minchin
      • Re: An Unusual (to me) Chatter Problem, jontom_1uk
      • Re: An Unusual (to me) Chatter Problem, Bob Minchin
      • Re: An Unusual (to me) Chatter Problem, jontom_1uk
      • Re: An Unusual (to me) Chatter Problem, Jonathan Barnes
      • Re: An Unusual (to me) Chatter Problem, jontom_1uk
      • Re: An Unusual (to me) Chatter Problem, Bob Minchin
      • Re: An Unusual (to me) Chatter Problem, jontom_1uk
• Simplatroll miller feed control, Yorkshireman48
• 3D Motor Models, Baren-Boym Company
  • Re: 3D Motor Models, mark@xxxxxxxxxxxxxx
• Re: Regular HS Twist Drills, Richard
• Re: Model Loco's, Alan Holmes
  • <Possible follow-ups>
  • Re: Model Loco's, Kevin Steele
    • Re: Model Loco's, Dick Ganderton
      • Re: Model Loco's, Kevin Steele
• Lubrication, Kevin Steele
  • Re: Lubrication, Tim Leech
    • Re: Lubrication, Peter A Forbes
      • Re: Lubrication, Kevin Steele
      • Re: Lubrication, Campingstoveman
  • Re: Lubrication, Charles Ping
  • Re: Lubrication, Tom
    • Re: Lubrication, Tim Leech
      • Re: Lubrication, Kevin Steele
      • Re: Lubrication, Tim Leech
      • Re: Lubrication, Kevin Steele
      • Re: Lubrication, Mark Rand
      • Re: Lubrication, Tim Leech
    • Re: Lubrication, Newshound
• i think this might help you out!..., arem_29
  • i think this might help you out!...Oh yeah?, Newshound
    • Re: i think this might help you out!...Oh yeah?, arem_29
      • Re: i think this might help you out!...Oh yeah?, Tony Jeffree
      • Re: i think this might help you out!...Oh yeah?, arem_29
• calling Adrian Hodgson, Andrew Mawson
• Re: Cheap Chinese Boring Head, Adrian Godwin
• India Stones, Boo
  • Re: India Stones, Tom
  • Re: India Stones - try waterstones instead, Dr . Spiff
  • Re: India Stones, IanC .
    • Re: India Stones, Dave Baker
      • Re: India Stones, Kevin Steele
      • Re: India Stones, Cliff Coggin
      • Re: India Stones, Adrian Godwin
    • Re: India Stones, Kevin Steele
• Hones for model engine cylinders, Boo
  • Re: Hones for model engine cylinders, Tim Leech
  • Re: Hones for model engine cylinders, John Stevenson
    • Re: Hones for model engine cylinders, Boo
      • Re: Hones for model engine cylinders, Steve
  • Re: Hones for model engine cylinders, Moray Cuthill
  • Re: Hones for model engine cylinders, rlincolnh
  • Re: Hones for model engine cylinders, Paul swindell
  • Re: Hones for model engine cylinders, Wayne Weedon
  • Re: Hones for model engine cylinders, Campingstoveman
  • Re: Hones for model engine cylinders, Steve R.
  • Re: Hones for model engine cylinders - Lapping Technics.pdf (0/1), Rich
    • Re: Hones for model engine cylinders - Lapping Technics.pdf (0/1), Boo
      • Re: Hones for model engine cylinders - Lapping Technics.pdf (0/1), Rich
  • Re: Hones for model engine cylinders, Rich
• Re: WOW -What a lathe, Steve
  • Re: WOW -What a lathe, Kevin Steele
• Re: Help Needed, Tim Christian
  • Re: Help Needed, Newshound
    • Re: Help Needed, pentagrid
• Unknown bit of equipment, Ken Parkes
• Re: Somewhat OT: Eyestrain & Monitors, jrlloyd

• Security
• UNIX
• Linux
• Coding
• Usenet

• Archive
• About
• Privacy
• Search
• Imprint

newsgroups.derkeiler.com  > Archive  > Uk  > uk.rec.models.engineering  > 2005-08