Re: 2.5 v6 vectra




"mart" <martyb_321@xxxxxxxxxx> wrote in message
news:1143807111.328838.81530@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
got a s reg vectra 2.5,had it a year ,every now and them it just will
not start?come back later starts sraight away??someone has mentioned
that it could be a crank case sensor? could anyone help me before i
start spending £s on it ant ideas please

Get the ECU fault codes read. But most likely it is a crank or cam position
sensor.

JB


.



Relevant Pages

  • Re: 325 dies under way,..
    ... I crank for 10 secs and wait 60 secs and try again. ... The car was brought to an expensive shop with this problem last summer ... where the sensor for this? ... error codes by steping on the gas pedal. ...
    (alt.autos.bmw)
  • Re: P0340 code on Ford 2.0L DOHC
    ... I used an equivalent tool to lock in the cams. ... the crank pulley was at 12 o'clock. ... The sensor was cheap so that's the first thing I changed out - no change. ...
    (rec.autos.tech)
  • Re: 2000 E46 OBD code 1498
    ... Jeff Strickland wrote: ... Not so - it's the crank sensor which basically times the spark. ... trigger the ignition from the crank only - the Ford EDIS system does this ...
    (alt.autos.bmw)
  • Re: 99 Chrysler 300M 3.5L - Cranks, will not start
    ... crank sensor, but which piston will be at TDC comes from the cam sensor. ... I guess, as you suggest, I could imagine it being able to sync up with no crank signal before I could imagine it syncing up with no cam signal. ... The broken timing belt threads we see on the LH car forums very often report the event happening immediately at startup or at low speeds (not difficult to imagine that the more pulsatile/high-peak stresses on the timing belt would occur at the lower speeds when smoothing flywheel effects on the cam are for all intents and purposes absent. ...
    (rec.autos.makers.chrysler)
  • Re: 93 Caravan Computer problem
    ... ignition components like plug wires and shorting out the system. ... Diagnostics computer shows crank senor good, cam sensor good, ... Disconnect computer, won't reset. ...
    (rec.autos.makers.chrysler)