Re: 52 dB any good?
- From: "Serge Auckland" <serge.auckland@xxxxxxxxxxxxx>
- Date: Thu, 27 Apr 2006 13:44:00 +0100
"Keith G" <keith_g@xxxxxxxxxxxxx> wrote in message
news:J4ydnfd_luefLc3ZRVnyuw@xxxxxxxxxxxx
Keith,
My new/old Technics tuner advises me my FM signal strength is 52 dB - is
that good, bad or just plain ugly, given the palaver with the aerial
installation a while back?
TIA
(Also posted to the vinyl group in error!)
Without knowing what the 0dB reference is, it's difficult to know *what*
they mean.
If the signal strength is -52dBm into 75 ohms, then that's a voltage level
of 687uV which is a bit low. Knowing where you're located and how far from
Peterborough, I would have expected some 2mV at the tuner, but maybe you
have some high ground between you and the TX. If the tuner doesn't hiss on
Radio 3 in the evenings when the processing is turned off, then you should
be OK even on the signal you have. Most tuners achieve 50dB S/N ratio with
under 100uV, but don't reach their maximum S/N ratio until nearer 1mV.
S.
.
- Follow-Ups:
- Re: 52 dB any good?
- From: Arfa Daily
- Re: 52 dB any good?
- From: Chris Isbell
- Re: 52 dB any good?
- From: Keith G
- Re: 52 dB any good?
- References:
- 52 dB any good?
- From: Keith G
- 52 dB any good?
- Prev by Date: 52 dB any good?
- Next by Date: Re: Power Consumption
- Previous by thread: 52 dB any good?
- Next by thread: Re: 52 dB any good?
- Index(es):
Relevant Pages
|
