Re: PC Memory question/update

On Thu, 1 Sep 2005 21:23:46 +0100, BoyPete wrote:

> JoeH wrote:
>> On Thu, 1 Sep 2005 17:43:02 +0100, Flyiñg Ñuñ 2°°5 + wrote:
>>
>>> Is it possible that you have disturbed a lead or jumper on you mobo
>>> when you were fiddling with the RAM sticks and their sockets?
>>
>> Some monitors have a lead that has a plug on both ends i.e. it plugs
>> into the monitor as well the graphics card. If yours is one of these
>> you may have disturbed either (or both) end(s).
>>
>> Also check for bent pins in the plug(s)
>
> There'd still be one beep on POST :)

True, provided it passed (and the speaker lead hadn't become
detached).

It might also be worth considering clearing the CMOS memory using the
jumper J18 as described on page 17 of 32 in the manual.
http://www.asrock.com/Drivers/Manual/P4i45GL-GV_R51_UM.pdf
--
Joe
.

Relevant Pages

  • Re: PC Memory question/update
    ... >> when you were fiddling with the RAM sticks and their sockets? ... > Some monitors have a lead that has a plug on both ends i.e. it plugs ...
    (uk.people.silversurfers)
  • Re: PC Memory question/update
    ... > were fiddling with the RAM sticks and their sockets? ... Some monitors have a lead that has a plug on both ends i.e. it plugs ...
    (uk.people.silversurfers)
  • Re: Experience with VGA/KVM switch?
    ... work if the monitors are analog and the keyboards & mouse PS2. ... I'm online with DSL ... plug my monitor in the OUT and my laptop in one of the INs. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Precision taper/polishing job
    ... dies wear out much, much too fast with abrasive compositions. ... The compressed form could the be extracted from the tube by ... either removing the support for the plug and pushing on through ... Enco has pvc/delrin/nylon rod for the plug and ram. ...
    (rec.crafts.metalworking)
  • Re: Wait a cycle after resetting MIL before inspection?
    ... around 100 miles and I will fail because of that. ... Does NJ put the car on a dyno or do they just plug it into a scanner? ... you'll fail if the monitors are not all reported "ready". ... monitors to report "ready". ...
    (rec.autos.tech)