Re: 360 scratches discs?

Chris F wrote:
>
> On Sat, 31 Dec 2005 18:55:58 GMT, "PhilÃ?" <iclgateway@xxxxxxxxxxx>
> wrote:
>
> >
> >"Joe Chip" <hovx.vap@xxxxxxxxx> wrote in message
> >news:vekdr15kmm7skuj8gfdftqg9hqvea0b9q3@xxxxxxxxxx
> >> On Sat, 31 Dec 2005 10:54:00 GMT, Alan Woods
> >> <redxtrickster@xxxxxxxxxxx> wrote:
> >>
> >>>I've had a 360 for a couple of weeks. Yesterday I put a game's disc in
> >>>the x-box and after a few seconds got a "Cannot read disc possibly due
> >>>to dammage or incorrect region." (I paraphrase).
> >>>
> >>>I took the disc from the x-box and found a groove had been scored
> >>>around the disc about 10mm from the edge ruining the disc.
> >>
> >> I've had this, almost exactly; orientation horizontal, perfect disk,
> >> 30 seconds later nice scratch round the outside of the disk. No knocks
> >> ... nothing ... I'm a zealot when it comes to looking after my disks
> >> ... I have lost some confidence here ... will another £50 disk bite
> >> the dust?
> >>
> >
> >The £50 you are paying is for the content, most publishers will replace the
> >DVD for a handling/p&p fee (about £5) if you send the damaged one in.
> >
> or take it back to the shop and complain, as shops get refunded on
> faulty stock they return to their suppliers.
> --
This happened to a ps2 game of ours (lego stars wars, blue disc)
almost immediately could hear it doing something when playing, wore a
groove in it within a couple of days. Returned it to woolies and they
swapped it without quibble.

--
Paul (We're too young to fall asleep)
-------------------------------------------------------
Stop and Look
http://www.geocities.com/dreamst8me/
.

Relevant Pages

  • Re: dust problem
    ... Built a ambient dust collector to filter the dust floating in the ... I am wanting to exhaust as much dust to the outside of my shop as ... I'm also thinking about venting the dust/chips from my cyclone ... Can I build a exhaust fan unit to discharge dusty air from my shop ...
    (rec.crafts.woodturning)
  • Re: dust problem
    ... Built a ambient dust collector to filter the dust floating in the ... I am wanting to exhaust as much dust to the outside of my shop as ... I'm also thinking about venting the dust/chips from my cyclone ... Can I build a exhaust fan unit to discharge dusty air from my shop ...
    (rec.crafts.woodturning)
  • Re: dust problem
    ... Built a ambient dust collector to filter the dust floating in the ... I'm also thinking about venting the dust/chips from my cyclone ... My shop is 24x32x8 high and in the country, ... Can I build a exhaust fan unit to discharge dusty air from my shop ...
    (rec.crafts.woodturning)
  • Re: dust problem
    ... I don't have a dust collector, and I do have a dusty shop, so I'm sure ... If you exhaust all the dusty air from ... fan efficiency and static pressure when you are sizing the fan. ...
    (rec.crafts.woodturning)
  • Re: Shop vac for dust collection
    ... >So after using them there is always dust all over the place. ... I sure would be hooking up a Shop Vac if for no other reason then to ... Dust Collectors work by sucking a lot of air at a relitevely low speed ...
    (rec.woodworking)