Re: DRAWER PROBLEMS

You'll have to open up the top cover of the DVD drive.
Switch on the console. eject the tray. switch off at the back.
pull out the tray completely.
set the set the white plastic pole completely to the left,
front side of deck will tilt downwards.
reinsert the tray.
switch the console back on and the tray will reposition itself back to
normal position.

"VIRTUAL ALAN" <alansbrown@xxxxxxxxxxxxxxxx> wrote in message
news:iGArg.281843$8W1.70709@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
What do you think it could be???

http://www.youtube.com/watch?v=GNk56kfp9-k



.

Relevant Pages

  • Re: Sega CD (Bios 1.10) Troubleshooting
    ... Upon further investigation of the CD mech I figured out that other switch is ... For one thing on the tray towards the back ... I wonder if Sony happen to use this same mech assembly in any PC CD drives. ...
    (rec.games.video.sega)
  • Sega CD (Bios 1.10) Troubleshooting
    ... I have an original Sega CD that I bought when it was first launched in the ... Initially it had problems with opening and closing the CD tray. ... the leaf switch that detects when the CD tray is fully open. ... But there's another leaf switch to detect when the CD tray is fully closed. ...
    (rec.games.video.sega)
  • switch debounce w/PICs A/D converter?
    ... I've got a mechanical switch to debounce. ... It's for a tray that i slam ... A/D samples. ...
    (comp.arch.embedded)
  • CBM monitor power switch
    ... have a separate power supply board mounted on a slide-in plastic tray. ... wires connect the switch to the chassis. ... Position the monitor face down on a cloth or newspaper to prevent ...
    (comp.sys.cbm)
  • Re: switch debounce w/PICs A/D converter?
    ... >I've got a mechanical switch to debounce. ... It's for a tray that i slam ... >anyone used the A/D converter in a micro to debounce a switch? ...
    (comp.arch.embedded)