Re: Replacement PS2 Controller cables.

In article <le9ls15r4vda7o8fmakgrn5son6pqodfpc@xxxxxxx>, deKay says...
> Soni tempori elseu romani yeof helsforo nisson ol sefini ill des Sun, 15 Jan
> 2006 16:58:47 -0000, sefini jorgo geanyet des mani yeof do
> uk.games.video.playstation, yawatina tan reek esk Conor
> <conor.turton@xxxxxxxxx> fornis do marikano es bono tan el:
>
> >In article <1goks11cbop0rseikkho8vjpi1pv9c1b63@xxxxxxx>, deKay says...
> >
> >> Just buy extension cables and hack them up?
> >>
> >If I wanted to do that, I'd have just cut up the existing cables
> >wouldn't I?
>
> Then I don't understand the question. You said your cables were chewed. I
> suggested a replacement for the cable.
>
How? It's as plain as day. What I want is to undo the screws on the
controller, unplug the original cable from the PCB and plug in a new
one. What I don't want to do, because I can't be arsed - not because I
can't, is to start fannying around with very thin wires and my
soldering iron.

If I wanted to hack cables up and fanny around soldering them onto the
multiplug, I'd have done it and wouldn't have posted the question,
would I?

But it looks like I'll have to as I've drawn a blank.

--
Conor

Windows & Outlook/OE in particular, shipped with settings making them
as open to entry as a starlet in a porno. Steve B
.

Relevant Pages

  • Re: Soldering Iron
    ... Can anyone recommend a good value soldering iron for basic cable ... numerous cables and repaired various microphones, ... and some silver solder. ...
    (rec.arts.movies.production.sound)
  • Re: Cables go bad?
    ... Seems to me if you buy a $15 soldering iron, all you'll ever need is the bare minimum number of cables plus one extra of each in case of failure at a gig -- for the rest of your life. ...
    (alt.guitar)
  • Re: audio emergency preparedness kit
    ... Needlenose pliers, crimpers, soldering iron & solder ... An inline current meeting to see how many amps your pulling ... Extra cables & adapters - Especially oddball ones. ... I've got a big bag with everything and within it a few smaller bags of ...
    (rec.audio.pro)
  • Re: [OT] Soundcard for music PC
    ... Or if you own a soldering iron, ... make your own cables. ... Didnt realise you could do that. ... lop the 3.5mm jack off the mic and solder on a RCA ...
    (alt.guitar.beginner)
  • Re: Does anyone use a xenyx 2442 or ub2442 mixer with a delta 1010?
    ... I think it was Arny Kruger who used to suggest the following to people ... who knew which end of a soldering iron to hold - get a TRS-TRS cable ... That will give you two "insert output" cables that you can plug ...
    (rec.audio.pro)