Re: PowerMac deadness following power cut

macfizz@xxxxxxxxx <macfizz@xxxxxxxxx> wrote:

On Feb 28, 12:01 pm, black.h...@xxxxxxxxxxxxxxx (Jon B) wrote:

Powercuts have a nasty habit of flattening PRAM batteries too. Otherwise
it's probably the PSU.

I wondered about the PSU. But if that had gone, I should see the power
light coming on on the box or the monitor, should I?

The trickle feed might still be there to power the LED, which version
PowerMac is it? Can check down the diagnostic charts, but chances are
the next item on the list after PRAM & PSU is the logic board...
--
Jon B
Above email address IS valid.
<http://www.bramley-computers.co.uk/> Apple Laptop Repairs.
.