Re: More on Ubuntu hangs

On Sat, 28 Apr 2007 23:09:54 +0100, Martin Gregorie wrote:

That's odd. I'm running FC6 (and before that FC4 and FC5) in a Netvista
with APIC version 17, IOAPIC version 32, a Pentium III (Coppermine) CPU,
256 MB RAM. I have two PCI cards installed: an 8139 network card and a 2
hub 6 port USB 2.0 card, which is used for external drives and a memory
stick.

Different motherboard, perhaps? The model number of mine is 8318, for
what it's worth.

Ian
.

Relevant Pages

  • Re: PC Power supply
    ... The light is simply wired to the standby output of the PSU. ... graphics card was not fully inserted in the slot. ... I have seen that symptom caused by bad RAM, overclocking the CPU, ...
    (sci.electronics.repair)
  • Re: PC Power supply
    ... At first glance it is easy to blame the P/S itself, ... graphics card was not fully inserted in the slot. ... I have seen that symptom caused by bad RAM, overclocking the CPU, ...
    (sci.electronics.repair)
  • Re: changing the fan cooler on my video card
    ... Now that the card is bare of a cooler. ... what the connector says are pointed inwards on the inside pins and the ... using a screw driver to screw in the motherboard screws that has been ... This Zalman comes with extra RAM, ...
    (microsoft.public.windowsxp.hardware)
  • Re: changing the fan cooler on my video card
    ... I just need the new cooler to slap onto the card and I'll ... the " CPU chip " is almost in the middle of the card and on the below the center of the card. ... RAM sinks need to be fitted or not. ...
    (microsoft.public.windowsxp.hardware)
  • Re: changing the fan cooler on my video card
    ... Ok, so your saying to buy the Zalman VF900-Cu VGA Cooler, or that's what you ... I took off the stock cooler and fan and I have the bare card with the ... This Zalman comes with extra RAM, ... CPU chip sorta. ...
    (microsoft.public.windowsxp.hardware)