Re: KVM Needed

Daniel James wrote:

So ... you're saying that the KVM switch appears to be detecting the keyboard and/or mouse connection to determine whether there is a PC on that port (or whether the PC on that port is switched on), and not switching the monitor signal if it thinks the PC is off/absent? 

Correct :)

I haven't come across that behaviour before -- if that's a "feature" it seems needlessly limiting.

It is odd, it wasn't like this with the previous 2 port KVM I had. These are the only two I've used/had access to, so I'm not sure if my old or new one breaks the norm.
.

Relevant Pages

  • Re: WMDC not syncing
    ... I have enabled port 990 on the firewall (along with all other recommended ... Can you tell me which version of WMDC you're using? ... Usually switching to serial will fix the problem. ... received a connection from the device, ...
    (microsoft.public.pocketpc.activesync)
  • Re: Locked Keyboard
    ... Try switching the cables of your mouse and your keyboard, ... use the same type of connection. ...
    (microsoft.public.office.misc)
  • Can you help?
    ... My cable to my camera was attached to the serial ... MY new keyboard doesn't have the same connection, ... camera to a serial port on my computer. ...
    (microsoft.public.windowsxp.photos)
  • Re: Correction
    ... Normally to physically disconnect is just a matter of reaching for the ... >> I have an ADSL connection which polls my computer from time to time, ... > disallow each and every port with Windows Firewall? ...
    (microsoft.public.windowsxp.messenger)
  • Re: Using Remote Desktop From an SBS Domain
    ... when you tried to RDP while attached directly to a port on your router? ... Internet to initiate an IP conversation with your computer. ... This situation is different than if you ran your own NAT connection sharing ...
    (microsoft.public.windows.server.sbs)