Re: Flat screen monitor


"George" <band@xxxxxxxxxxxxxxxx> wrote in message
news:aOAwj.13128$XI.10168@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Time Model L157

Anyone repair them?

Fault condition : Dead,Standby light lit and Screen not lit.

Any tips on what to look at on the circuit board and Backlight circuit
board?
Tried the obvious...2 Fuses,no signs of burnt out components,dry joints.

TIA



Very commonly its just oxidation on the connecters between the inverter
board and the backlights. Use some proper cleaner or just unplug/plug them
100 times or so. You can tell if its an inverter/backlight fault usually as
you can still see the images on the screen in the right light if you look
carefully.

Gordy


.

Relevant Pages

  • Flat screen monitor
    ... Anyone repair them? ... Fault condition: Dead,Standby light lit and Screen not lit. ... Any tips on what to look at on the circuit board and Backlight circuit ...
    (uk.comp.homebuilt)
  • Re: Flat screen monitor
    ... Fault condition: Dead,Standby light lit and Screen not lit. ... Any tips on what to look at on the circuit board and Backlight ... The effect of 1.2Kv discharging through the body of an insect is quite ...
    (uk.comp.homebuilt)
  • Re: Flat screen monitor
    ... Fault condition: Dead,Standby light lit and Screen not lit. ... Any tips on what to look at on the circuit board and Backlight ...
    (uk.comp.homebuilt)
  • Re: Flat screen monitor
    ... Fault condition: Dead,Standby light lit and Screen not lit. ... Any tips on what to look at on the circuit board and Backlight ...
    (uk.comp.homebuilt)
  • Re: Flat screen monitor
    ... Fault condition: Dead,Standby light lit and Screen not lit. ... Any tips on what to look at on the circuit board and Backlight ...
    (uk.comp.homebuilt)