Re: RAID array for home

"GSV Three Minds in a Can" <GSV@xxxxxxxxxxxxxxxx> wrote in message news:spAL49AI+m$GFANd@xxxxxxxxxxxxxxxxxx
Bitstring <46fe6346$0$13941$fa0fcedb@xxxxxxxxxxxxxx>, from the wonderful person GB <NOTsomeone@xxxxxxxxxxxxx> said

"GSV Three Minds in a Can" <GSV@xxxxxxxxxxxxxxxx> wrote in message
news:DLxggNEOdl$GFAbS@xxxxxxxxxxxxxxxxxx
Bitstring <1i57tte.1eghku3cxa0yeN%me@xxxxxxxxxxx>, from the wonderful
person xmas <me@xxxxxxxxxxx> said
After a recent drive failure, I want to set up a RAID array at home both
for speed of data access and redundancy. Never set one up before, but
would like to do it in hardware rather than relying on Windows: any
recommendations?

'Don't' would probably be my first response.

'Do' would be mine!


Speed - you won't see much, if any, benefit unless you are routinely using
huge files.

RAID 1 is duplication, and there should be no speed improvement.

Which is why I assumed we were talking RAID 3, or 0+1.

Redundancy - So you have the data replicated across 2 (or more) hard
drives, but the whole thing still relies on one RAID controller, CPU,
motherboard, PSU etc. In particular if the controller goes South you may
be stuffed. If one disk fails (which is what you are guarding against) you
MAY be able to rebuild the array (assuming you can source an identical
disk), but several folks have discovered that isn't so easy either (you
don't find out until it fails, of course).

However, even if you can't rebuild the array, the one working disk still has
all the data on it, and it is still accessible. So, you still have your
precious data.

As you would if you had just copied it to another place on the network.

Which does require a network, yes?

And this assumes your controller hasn't copied the cr&pped version to the second drive too, or that the power spike didn't take out both drives at the same time.

But surely this is better than no backup? And there`s no reason not to use both options you`ve mentioned - you seem to have an agenda against using any form of RAID in the home - why? there are plenty of times it can be a nice simple way to add some resiliance to the data store.

.