I installed motherboard, hard drive etc no problem came to switch on and
nothing. No power at all.
I have re-checked to make sure all leads are connected properly and that
every lead is where it should be (must have read manual numerous times to
make sure im putting the power switch onto correct pins). The PSU doesnt
have a on/off switch.
I have tried a different motherboard and still same problem and even tried a
different PSU and still same.
This is the first time ive tried a media centre and i think its something
obvious i have missed but cant think what.
Re: Prob with Media centre case. ... I installed motherboard, hard drive etc no problem came to switch... No power at all. ... Possibly even a defective mains lead.... (uk.comp.homebuilt)
Re: Prob with Media centre case. ... I installed motherboard, hard drive etc no problem came to switch on and ... No power at all. ... make sure im putting the power switch onto correct pins).... (uk.comp.homebuilt)
Re: Bridgeport boss 4 Spindle not powering up (continued) ... you need to reset a safety interlock on the motor switch pod... I can work my way through the average power... activate the spindle all he would get would be a buzzing sound. ... each for a different axis stepper motor drive).... (rec.crafts.metalworking)
Re: PC doesnt start ... With the switch pressed the voltage are within the specs but, ... I measured the voltage at the Power switch plug, when connected to the MoBo, ... Why then would a power switch or connections be ... (microsoft.public.windowsxp.hardware)
Re: Protecting the system ... Two notices, one "press briefly to shut down" pointing at the power button, ... the plug or, if it has a switch, the PSU. ... minimise writes to the flash device which ext3 would be constantly doing ... The other thing I need to store is the system configuration files - ... (uk.comp.os.linux)
