Would 3GB of memory work in dual-channel mode? From what I've read in
several motherboard manuals, to use all four memory slots requires all the
memory to be the same for dual-channel, but is it possible to use 2x1GB in
one channel and 2x512MB in the other?
Re: New M2A-VM HDMI, Cant get it to start ... It was not working properly in dual-channel mode at first. ... Went into BIOS and put it down to 1.9V for the RAM and it's working ... built-in video is dependent on the system memory for its ... if ATI chipsets have as many issues with built-in GPU or not. ... (alt.comp.periphs.mainboard.asus)
Re: DTV antennas? ... I recently used a bootable program called MEMTEST86+ which runs quite ... a selection of pattern and offset tests on the memory.... hour or so that my motherboard was unable to run with four DDR memory ... sticks, in a dual-channel mode, with good reliability. ... (sci.electronics.design)
Re: DDR2 memory question ("dual-channel load") ... On the memory support list for DDR2-1066 from their site ... there's a column which says 'Dual-Channel Load '. ... Not really - that info will be in the mobo manual - this is just ... To use dual-channel mode, memory modules should be ... (uk.comp.homebuilt)
Re: 1GB memory @ 400MHz or 2GB at 333MHz ? ...Brian Wescombe wrote: ... 1GB at 400MHz (2x512MB in dual-channel mode),...memory but at a slower speed be better or ... I'm using a Pentium 4 3.2GHz processor, board is an Asrock 88V775 ... (uk.comp.homebuilt)
Re: 1GB memory @ 400MHz or 2GB at 333MHz ? ...Brian Wescombe wrote: ... 400MHz (2x512MB in dual-channel mode), would using more memory (4x ... Anything that involves using vast files like photo and video editing would ... (uk.comp.homebuilt)
