Re: New build computer not booting
- From: "Jim Hollis" <jimhollis@xxxxxxxxxxxxxxxxx>
- Date: Fri, 30 Jun 2006 09:49:45 +0100
"Rich P" <rpike1983@xxxxxxxxxxx> wrote in message
news:1151605752.847577.64240@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi,
I recently have bought some new components to build a new computer
(rescuing a hard drive, CD-RW, DVD-RW, sound and graphics cards from an
old computer)
My problem is I have put it all together and the computer wont boot.
All the case fans and CPU fan are going, the LEDs light up (power full
and the HDD faintly) But there is no video signal out. I have also
noticed that the DVD drive powers up but the CD drive does not (tried
swapping the power plugs around) and I am now at a loss and need some
advice. I have only ever built one system up before but that was
relatively simple compared to this.
The components are an Asus P5P 800 PE motherboard, Intel Pentium D 930,
Maxtor 120GB HDD Drive and a 48oW PSU
Many Thanks
Rich.
Exactly which "old vga card" are you fitting to it and have you checked to
see if the new mb can take 3.3v cards?
Is the new mb 1.5v only?
If so chances are you have blown the new mb.
.
- References:
- New build computer not booting
- From: Rich P
- New build computer not booting
- Prev by Date: Re: New build computer not booting
- Next by Date: Re: Anyone know where i can buy this in UK
- Previous by thread: Re: New build computer not booting
- Next by thread: Re: New build computer not booting
- Index(es):
Relevant Pages
|
|
