Re: Hard disk interface
carman wrote:
>
> I have a Hitachi 400GB ATA100 disk that I want to fit into an external
> enclosure. The enclosure I intend buying has an interface of ATA133. Will
> this present any problems?
No, go ahead. But the cable length must be short.
.
Relevant Pages
- Re: Review: JJ-23VSUES SATA to USB2/eSATA enclosure
... The Jou Jye JJ-23VSUES is an external 3.5" enclosure for SATA ... It has both an USB2.0 and an eSATA connector. ... will likely kill your disk anyways. ... with rsync brought it up to 13C over ambient temperature, ...
(comp.sys.ibm.pc.hardware.storage) - Review: JJ-23VSUES SATA to USB2/eSATA enclosure
... The Jou Jye JJ-23VSUES is an external 3.5" enclosure for SATA ... the disk is held in place by two ... the Samsung operates at 9C over ambient temperature when idle ... eSATA gives full SATA speeds. ...
(comp.sys.ibm.pc.hardware.storage) - Re: WinXP, Dual Boot, New Hard Drive
... >> the USB external enclosure that you already have. ... I use a Ghost bootable floppy disk to undertake the cloning ... >> hard drive) disk and the destination disk. ...
(microsoft.public.windowsxp.hardware) - Re: Old Mac Mini - what system to upgrade to?
... an external startup disk that didn't spin down, ... I haven't noticed delays when starting from my internal drives. ... It spins up loud and fast. ... I don't know if it's a defect, a feature of the chipset, or something designed into the enclosure. ...
(comp.sys.mac.system) - Re: Do hard disks get less tolerant to heat as they age?
... be to remove the disk from its enclosure and connect ... Yeah, some drives get stinking hot when run loose on the desktop. ...
(comp.sys.ibm.pc.hardware.storage) |
|
