Re: Asus P5VD1-X Mobo not detecting SATA-I drives.




"Paul" <Paul@xxxxxxxx> wrote in message
news:2UT4f.131066$G8.63015@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> "Paul" <Paul@xxxxxxxx> wrote in message
> news:MAT4f.131038$G8.64840@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> I have just built a PC for a friend.
>
>
>
> Additional information. I've just tried both the HDD's in my own computer
> using the SATA cables I've been trying with all night. Both HDD's detected
> and a RAID 0 array successfully set up.
>
> I'm thinking maybe the P5VD1 motherboard is screwed... anyone??
>
>
> Incidentally - One issue I feel necessary to mention. I'm using a 500w
> X-Connect Active PFC PSU. This has a 20pin connector which I'm connecting
> to
> a 24pin Mobo connector - I was advised this is possible and the rest of
> the
> system does power up.. Like I said, there is warmth coming from the
> drives.
> Do you think this could be the issue? I don't think so as the BIOS
> doesn't
> give the options stated in the manual.
>
> Other devices on board are a DVD-ROM, GF6600 and FDD - nothing more. (CPU
> is P43GHz LGA 775)
>
>

I dont think they are detected until you load the drivers. Have you tried to
go ahead and install windows then there is an option to load the drivers

On your other machine perhaps the drivers were already loaded.

This could be garbage as I havent used sata yet but i seem to remember this
from somewhere............

Worth trying until one of the more informed users helps you!


.



Relevant Pages

  • Re: Replacements for 2SA1302/2SC3281
    ... operation you do not connect any load. ... Higher power amplifiers with a low impedance main feedback network ... might load the drivers too hard and cause you to waste silicon. ... you should be able to get a 120 V P-P waveform on the scope. ...
    (sci.electronics.repair)
  • Re: HELP@from anyone who can.
    ... and it continues to struggle to load. ... There are several utilities that will verify your fonts. ... Head to your mouse/pointer Web site and get the latest drivers ... You might then want to do a System Restore, ...
    (alt.graphics.photoshop)
  • Re: Linux kernel development for a beginner
    ... BearItAll wrote: ... Then all your 512 needs to do is load from offset 513 to 513+2048 into ... It looks quite interesting, though I'm not sure whether I'm going to finish studying the boot loader itself (like I said above, I'm not sure it'd be wise to study BIOS at this point in time). ... > For many drivers, the load order is not just significant, but crucial ...
    (alt.os.linux)
  • Re: Question about F6 when installing SBS
    ... the original problem was with ShadowProtect not letting me load two ... adapter drivers after hitting F6. ... txtsetup.oem file for the Siig SATA SC-SA0012-S1 adapter. ...
    (microsoft.public.windows.server.sbs)
  • Re: RE:Clean Install/Att. Dave Patrick
    ... Dave Patrick ....Please no email replies - reply in newsgroup. ... | In my attempt at getting help for the Drivers that my system could not ... | that also feeds another speaker, is connected to a connector attached to ... | install, ...
    (microsoft.public.win2000.general)

Loading