Re: Mainboard/CPU Temps



It`ll be the hot weather!







"Andy Hewitt" <abh at dsl dot pipex dot com> wrote in message
news:42d6b7be$0$6483$cc9e4d1f@xxxxxxxxxxxxxxxxxxxxxxxxxxx
> Hi Guys,
>
> I've not posted here before so apologies for diving in and just asking
> questions but I'm looking for some advice/suggestions regarding my pc.
>
> Its not a home-built pc but a Medion of the shelf jobby from PC world and
> I'm getting a bit worried by its running temp. I've just noticed while
> doing a check using Sandra that the operating temperatures seem extremely
> high and I'm looking for ways to reduce this. (Bearing in mind i'm not
> that
> technically savvy with computer hardware, can just about install a HDD!)
>
> The report shows that the Mainboard temp is 59.0°C and the CPU temp is
> 72.5°C. I'm guessing this isn't normal for this kind of machine???
>
> The full log is below, thanks for any tips.
>
> Andy
>
> Mainboard
> Manufacturer : MICRO-STAR INTERNATIONAL CO., LTD
> MP Support : 1 Processor(s)
> MPS Version : 1.40
> Model : MS-7015
> System BIOS : 10/28/2003-KT600-8237-6A6LYM4DC-00
> Chipset : VIA KT400/A, KT600
>
> System Memory Controller
> Location : Mainboard
> Error Correction Capability : None
> Number of Memory Slots : 3
> Maximum Installable Memory : 3GB
> Bank0/1 - A0 : None None None None DIMM 256MB
> Bank2/3 - A1 : None None None None DIMM 256MB
> Bank4/5 - A2 : Empty
>
> Chipset 1
> Model : VIA Technologies Inc VT8377 Apollo KT400/A/600 CPU to PCI Bridge
> Bus(es) : ISA AGP PCI IMB USB FireWire/1394 i2c/SMBus
> Front Side Bus Speed : 2x 199MHz (398MHz data rate)
> Maximum FSB Speed / Max Memory Speed : 2x 200MHz / 2x 200MHz
> Width : 64-bit
> IO Queue Depth : 4 request(s)
>
> Chipset 1 Hub Interface
> Type : V-Link
> In/Out Width : 4-bit / 4-bit
> Multiplier : 2/1x
> Speed : 8x 66MHz (528MHz data rate)
> IO Queue Depth : 9 request(s)
>
> Logical/Chipset 1 Memory Banks
> Bank 0 : 256MB DDR-SDRAM 2.5-3-3-7 2CMD
> Bank 2 : 256MB DDR-SDRAM 2.5-3-3-7 2CMD
> Bank Interleave : 4-way
> Speed : 2x 165MHz (330MHz data rate)
> Multiplier : 5/6x
> Width : 64-bit
> Power Save Mode : No
> Fixed Hole Present : No
>
> APIC 1
> Version : 0.03
> Speed : 16MHz
> Multiplier : 1/2x
> Maximum Interrupts : 24
> IRQ Handler Engaged : Yes
> Enhanced Support : Yes
>
> Temperature Sensor(s)
> Board Temperature : 59.0°C / 138.2°F
> CPU Temperature : 72.5°C / 162.5°F
>
> Cooling Device(s)
> Auto Fan Speed Control : No
> CPU Fan Speed : 4355rpm
>
> Voltage Sensor(s)
> CPU Voltage : 1.62V
> +3.3V Voltage : 3.34V
> +5V Voltage : 5.03V
> +12V Voltage : 11.73V
> -12V Voltage : -12.12V
> -5V Voltage : -5.00V
> Standby Voltage : 4.95V
> Battery Voltage : 3.38V
>
>
>


.



Relevant Pages

  • Re: OverClocking Asus P5WD2-E Premium & Intel D 805
    ... As far as overclocking the 805, the 805's native mode is a 2.66GHz speed ... 133MHz physical clock is "quad pumped" inside the CPU to a 533MHz FSB ... Additional voltage is rarely required. ... adjusting the memory multipliers you may get other memory to work. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: OverClocking Asus P5WD2-E Premium & Intel D 805
    ... No contest there, that is the one to use (for ANY socket 775 configuraiton in which CPU cooling is an issue, and certainly for all overclocked processors). ... As far as overclocking the 805, the 805's native mode is a 2.66GHz speed ... Additional voltage is rarely required. ... adjusting the memory multipliers you may get other memory to work. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Fresh install wont compile requirement libraries for cvsup
    ... > memory at 133MHz. ... > won't have a 7:1 multiplier and you'll ... pentium runs faster than the bus speed. ... 9:2) to obtain the 450MHz CPU speed. ...
    (freebsd-questions)
  • Re: Problem with hard drive
    ... The STOP code indicates a motherboard level problem. ... Could you have bumped the memory chips, PCI cards, power connectors, ... If you took the CPU heatsink off, ... PSU voltages should be within 5% of stated voltage. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Overclocking X2 on A8N-E
    ... with the max 11x multiplier (2.398Ghz cpu clock), and am using an HT multiplier ... 5x (1.090Ghz HT clock). ... default, clock speed is 250, HT at 3x, and memory set at 333. ...
    (alt.comp.periphs.mainboard.asus)