Cheap machinery


I have a set of folding (manually) parmiter 'force 9' disks.
They were considered 'heavy' when folded, 'medium' when extended in the
mid 1975's. Would suit 65+Hp.

Also going for scrap are two paraploughs (+lots of spares).
These are IMHO ideal, even perfect, for underbusting permanent grassland
that has panned. These are 3 leg + 1 extension but really you need 25+
HP per leg (ie min 75) and 30 per leg is better. Used as 4-leg 120hp is
comfortable.

Flat roller (water filled).
Tedder (virtually unused).

--
Oz
This post is worth absolutely nothing and is probably fallacious.

Use oz@xxxxxxxxxxxxxxxxxxxx [ozacoohdb@xxxxxxxxxxxxx functions].
BTOPENWORLD address has ceased. DEMON address has ceased.

.

Relevant Pages

  • Working LN03 on offer -- UK
    ... A colleague is about to scrap a still-working DEC LN03 laser ... printer with "some spares", and asked me to find out if anyone is ...
    (comp.sys.dec)
  • Re: Dell Optiplex GX260 -- 2nd serial port
    ... The spares part 5P418 is very hard to find ..read end of line. ... The sales option 310-1675 has a full height case brkt but has the ... Anyone try a 310-6619 for a half height to suit a small form factor ... Prev by Date: ...
    (alt.sys.pc-clone.dell)
  • Kawasaki GPX250 and Kawasaki GPX600
    ... I have a complete Kawasaki GPX250 that is suitable for spares as I ... declared it scrap about five years ago when the heater pipes failed ... for a working quad bike that I can use to cross fields to get to my ...
    (rec.motorcycles)