Re: WTB: 20 pin to 24 pin ATX power converter thing

In article <1jio34ln4n98pcgel32cmu9ao1qggpqv9f@xxxxxxx>, Multithreaded
<g4lwq@xxxxxxxxxxx> writes

Not sure what this is called. I have a 24 pin ATX motherboard and an
old 20 pin ATX PSU. I need an adaptor so both can be used together.

You may not need it. The 20 pin plug will fit the 24 pin socket, and
the other 4 pins are usually only needed if you fit power-hungry CPUs.
This varies with board, though, so check the manual.

M.

--
(\__/) Bunny says NO to Windows Vista!
(='.'=) http://www.cs.auckland.ac.nz/~pgut001/pubs/vista_cost.html
(")_(") http://www.cypherpunks.to/~peter/vista.pdf


.

Relevant Pages

  • Re: Using 80 pin drives on a Fuel
    ... you should use an adaptor which is really LVD (which means no ... 50 pin connector) and you have to care for the correct SCSI ID ... Connecting SE devices should ...
    (comp.sys.sgi.hardware)
  • Re: help with laptop to desktop hard drive adapter
    ... The IDE adaptor on the cable side should have 39 pins, ... Also most drives have 44 + ... The red wire is +5V, ... I'd buy another adaptor - I think they're $6 at BestBuy. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Couple questions about using ADTPro on a GS
    ... another 9 to 25 adaptor hooked up to my computer. ... "Terminal," which provides an internal null modem. ... that have both 9 pin and 25 pin connectors on each end, ... I have 2 different of those cables (probably have more, ...
    (comp.sys.apple2)
  • Re: Using 80 pin drives on a Fuel
    ... Toni Grass wrote: ... single ended rather than LVD, but it doesn't even want to do that for me. ... you should use an adaptor which is really LVD (which means no ... 50 pin connector) and you have to care for the correct SCSI ID ...
    (comp.sys.sgi.hardware)
  • Re: Couple questions about using ADTPro on a GS
    ... adaptor, a null modem adaptor, then a 25 pin to 25 pin cable, then ... the display stuff should be just about the same. ...
    (comp.sys.apple2)