strained si cmos

From: "jason" <cheanglong@xxxxxxxxx>
Date: 27 Aug 2005 23:41:46 -0700

Hello All

Anyone knows the process flow of a strained Si cmos device?
The drain and source region is strained as well?
Kindly recommend any links or papers touch on the details of
fabrication

Thank you all

Jason

.

Prev by Date: Re: Is a 'neutral' metal-semiconductor junction possible?
Next by Date: Re: Is a 'neutral' metal-semiconductor junction possible?
Previous by thread: Is a 'neutral' metal-semiconductor junction possible?
Next by thread: Re: Ixys RF Power MOSFET IXZ210N50L & IXZ2210N50L - experience?
Index(es):
- Date
- Thread

Relevant Pages

strained Si cmos
... The drain and source region is strained as well? ... Kindly recommend any links or papers touch on the details of ...
(sci.electronics.design)
Re: AquaC EV120 or Euro-Reef CS6-2
... With the recommended mag7, most of the skimmate coated the inside of the riser tube and very little got pushed into the cup. ... It is very sensitive to this adjustment, but I have it tuned to fill the cup up to the drain in about 24 hrs. ... Anyway, I would recommend an EV, but with slightly more pump than recommended by ...
(rec.aquaria.marine.reefs)