Re: Sinking !

I'd add a muffin fan to blow across the aluminum.

Snag wrote:

Heat sinking , to be precise . Got the B.A.D.'s (big ass diodes , 275a @ 600v) in the mail , and am working on some heat sinkage . I have some 2" X 2" X 3/16" aluminum angle I plan on bolting into a T section (the diode will bolt through the doubled area) . A 3" section of that T will give me about 35 square inches of radiating surface . With convective cooling should that be enough for around 175 amps of DC current ? At that level , the duty cycle is only 20% ...
I'm also wondering what to use as insulating standoffs from the case . I sure don't want anything that might melt if things get a bit too warm ! The case will be 20 or 22 ga. *** metal , since I've got some around .
.

Quantcast