sci.engr.joining.welding

• Date Index

---

• Thermal impulse from quenching red hot steel rod in water, s.morra
  • Re: Thermal impulse from quenching red hot steel rod in water, Leo Lichtman
    • Re: Thermal impulse from quenching red hot steel rod in water, s.morra
      • Re: Thermal impulse from quenching red hot steel rod in water, Richard Smith
  • Re: Thermal impulse from quenching red hot steel rod in water, JMV
    • Re: Thermal impulse from quenching red hot steel rod in water, Leo Lichtman
• OA working pressure and a neutral flame, Michael Horowitz
  • Re: OA working pressure and a neutral flame, dcaster
    • Re: OA working pressure and a neutral flame, Michael Horowitz
      • Re: OA working pressure and a neutral flame, mhorowit
      • Re: OA working pressure and a neutral flame, Leo Lichtman
• name that rod!, mhorowit
  • Re: name that rod!, dcaster
  • Re: name that rod!, Wayne Cook
• OA Filler rod for car repair, Jim
  • Re: OA Filler rod for car repair, RoyJ
    • Re: OA Filler rod for car repair, Jim
      • Re: OA Filler rod for car repair, Kelley Mascher
• MIG feed roller groove, Andrew Mawson
  • Re: MIG feed roller groove, dcaster
  • Re: MIG feed roller groove, Wayne Cook
• TIG makes my fluorescent lights flicker..., stag5353
  • Re: TIG makes my fluorescent lights flicker..., Martin H. Eastburn
    • Re: TIG makes my fluorescent lights flicker..., acrobat ants
      • Re: TIG makes my fluorescent lights flicker..., stag5353
      • Re: TIG makes my fluorescent lights flicker..., Gunner
      • Message not available
      • HF is messing with the circuits in the helmet, John Noon
      • Message not available
      • Re: TIG makes my fluorescent lights flicker..., acrobat ants
• clarke spool gun welder, habbi
  • Re: clarke spool gun welder, Artemia Salina
    • Re: clarke spool gun welder, habbi
      • Re: clarke spool gun welder, Artemia Salina
• Tacking Al sheet, cl
  • Re: Tacking Al sheet, Vernon
    • Re: Tacking Al sheet, acrobat ants
    • Re: Tacking Al sheet, Ernie Leimkuhler
• "keyhole" shape?, Michael Horowitz
  • Re: "keyhole" shape?, Vernon
  • Re: "keyhole" shape?, John
    • Re: "keyhole" shape?, Peter Grey
      • Re: "keyhole" shape?, John
  • Re: "keyhole" shape?, Ernie Leimkuhler
    • Re: "keyhole" shape?, Peter Grey
      • Re: "keyhole" shape?, Richard Smith
      • Re: "keyhole" shape?, Vernon
• beam strength question, Brian
  • Re: beam strength question, RoyJ
  • Re: beam strength question, enl_public
    • Re: beam strength question, Brian
• Aluminum welding filler metal chart, John Noon
  • Re: Aluminum welding filler metal chart, john noon
  • Re: Aluminum welding filler metal chart, Boris Mohar
    • Re: Aluminum welding filler metal chart, Bart D. Hull
  • Re: Aluminum welding filler metal chart, Ernie Leimkuhler
    • Re: Aluminum welding filler metal chart, John Noon
      • Re: Aluminum welding filler metal chart, Ernie Leimkuhler
• profile cutter, Al
  • Re: profile cutter, R. Zimmerman
• Cutting advice please, Michael Horowitz
  • Re: Cutting advice please, Grant Erwin
  • Re: Cutting advice please, R. Zimmerman
  • Re: Cutting advice please, Leo Lichtman
    • Re: Cutting advice please, Michael Horowitz
      • Re: Cutting advice please, dcaster
      • Re: Cutting advice please, JohnM
      • Re: Cutting advice please, Leo Lichtman
      • Re: Cutting advice please, dcaster
      • Re: Cutting advice please, mhorowit
      • Re: Cutting advice please, Richard Smith
      • Re: Cutting advice please, dcaster
  • Re: Cutting advice please, Michael Horowitz
    • Re: Cutting advice please, R. Zimmerman
      • Re: Cutting advice please, Michael Horowitz
      • Re: Cutting advice please, Grant Erwin
    • Message not available
      • Re: Cutting advice please, Michael Horowitz
      • Re: Cutting advice please, Kelley Mascher
• Some help please, solo
  • Re: Some help please, R. Zimmerman
    • Re: Some help please, solo
      • Re: Some help please, R. Zimmerman
      • Re: Some help please, Tim Wescott
  • Re: Some help please, John Noon
    • Re: Some help please, R. Zimmerman
• which TIG filler?, zeb7k
  • Re: which TIG filler?, zeb7k
• using 'black' pipe for building projects???, Michael Horowitz
  • Re: using 'black' pipe for building projects???, enl_public
  • Re: using 'black' pipe for building projects???, Grant Erwin
  • Re: using 'black' pipe for building projects???, RoyJ
  • Re: using 'black' pipe for building projects???, zeb7k
• Cooling joints rapidly?, Michael Horowitz
  • Re: Cooling joints rapidly?, enl_public
    • Re: Cooling joints rapidly?, Leo Lichtman
  • Re: Cooling joints rapidly?, dcaster
  • Re: Cooling joints rapidly?, Vernon
• Mig polarity and other stuff...long...sigh, Gunner Asch
  • Re: Mig polarity and other stuff...long...sigh, ATP*
    • Re: Mig polarity and other stuff...long...sigh, Gunner Asch
      • Re: Mig polarity and other stuff...long...sigh, ATP*
      • Re: Mig polarity and other stuff...long...sigh, Gunner
      • Re: Mig polarity and other stuff...long...sigh, ATP*
      • Re: Mig polarity and other stuff...long...sigh, Ernie Leimkuhler
      • Re: Mig polarity and other stuff...long...sigh, Gunner
      • Amended - was Mig polarity and other stuff...long...sigh, Gunner
      • Re: Amended - was Mig polarity and other stuff...long...sigh, ATP*
      • Re: Amended - was Mig polarity and other stuff...long...sigh, Wayne Cook
  • Re: Mig polarity and other stuff...long...sigh, dcaster
• MIG TSSA Certification question., solo
• The Smith Welding Co. (selling parts), Michael Horowitz
  • Re: The Smith Welding Co. (selling parts), Rooster
  • Re: The Smith Welding Co. (selling parts), dcaster
    • Re: The Smith Welding Co. (selling parts), Michael Horowitz
    • Re: The Smith Welding Co. (selling parts), Michael Horowitz
• Has anyone had to leave their OA rig outside? How best protect?, Michael Horowitz
  • Re: Has anyone had to leave their OA rig outside? How best protect?, Vernon
• Which Welder Do I Need?, Mike
  • Re: Which Welder Do I Need?, Grant Erwin
  • Re: Which Welder Do I Need?, RDF
  • Re: Which Welder Do I Need?, Robert Ball
    • Re: Which Welder Do I Need?, dcaster
  • Re: Which Welder Do I Need?, Ron DeBlock
    • Re: Which Welder Do I Need?, Vernon
• Gauge creep?, Michael Horowitz
  • Re: Gauge creep?, Grant Erwin
    • Re: Gauge creep?, Leo Lichtman
      • Re: Gauge creep?, Winston
• The metal band on the hoses; can I move it?, Michael Horowitz
  • Re: The metal band on the hoses; can I move it?, Jess
    • Re: The metal band on the hoses; can I move it?, Michael Horowitz
      • Re: The metal band on the hoses; can I move it?, Jess
• Info request on materials, Billl George
  • Re: Info request on materials, Grant Erwin
  • Re: Info request on materials, Carl Ijames
• hey I just bought some Eutectic Staintrode A-MO, 3/32" AC/DC welding electrodes on ebay!!!?? woo hoo, bob
• Welding aircraft exhaust, Michelle P
  • Re: Welding aircraft exhaust, Michelle P
    • Re: Welding aircraft exhaust, Brian
      • Re: Welding aircraft exhaust, Michelle P
    • Re: Welding aircraft exhaust, Ernie Leimkuhler
      • Re: Welding aircraft exhaust, Michelle P
    • Re: Welding aircraft exhaust, sucess!, Michelle P
      • Re: Welding aircraft exhaust, sucess!, Ernie Leimkuhler
      • Re: Welding aircraft exhaust, sucess!, RDF
      • Re: Welding aircraft exhaust, sucess!, dcaster
      • Re: Welding aircraft exhaust, sucess!, Michelle P
      • Re: Welding aircraft exhaust, sucess!, RDF
      • Re: Welding aircraft exhaust, sucess!, Michelle P
• powcon 300st or a maxstar 150 st, bob
  • Re: powcon 300st or a maxstar 150 st, Ernie Leimkuhler
    • Re: powcon 300st or a maxstar 150 st, bob
    • Re: powcon 300st or a maxstar 150 st, bob
    • Re: powcon 300st or a maxstar 150 st, bob
• Best electrode to handle vibration?, BoyntonStu
  • Re: Best electrode to handle vibration?, RDF
  • Re: Best electrode to handle vibration?, RoyJ
  • Re: Best electrode to handle vibration?, JohnM
  • Re: Best electrode to handle vibration?, R. Zimmerman
    • Re: Best electrode to handle vibration?, BoyntonStu
• MIG welding near grease? safe?, GDC
  • Re: MIG welding near grease? safe?, Leo Lichtman
    • Re: MIG welding near grease? safe?, carl mciver
• Aluminum welds, steamer
  • Re: Aluminum welds, spjames
  • Re: Aluminum welds, Leo Lichtman
  • Re: Aluminum welds, Wayne Cook
    • Re: Aluminum welds, RDF
  • Re: Aluminum welds, Ernie Leimkuhler
  • Re: Aluminum welds, Martin H. Eastburn
  • Re: Aluminum welds, Badsolo
• When did flame arrestors start being used?, Michael Horowitz
  • Re: When did flame arrestors start being used?, R. Zimmerman
    • Re: When did flame arrestors start being used?, RDF
      • Re: When did flame arrestors start being used?, Vernon
      • Re: When did flame arrestors start being used?, R. Zimmerman
• Miller 330 A/BP Rectifier, Phil
• Inspecting, cleaning, regulator, torch, handle, etc, mhorowit
  • Re: Inspecting, cleaning, regulator, torch, handle, etc, R. Zimmerman
    • Re: Inspecting, cleaning, regulator, torch, handle, etc, Michael Horowitz
• Maxstar 150 ST , thinking of buying one but.., bob
  • Re: Maxstar 150 ST , thinking of buying one but.., Ernie Leimkuhler
    • Re: Maxstar 150 ST , thinking of buying one but.., garyh82012
      • Re: Maxstar 150 ST , thinking of buying one but.., Ernie Leimkuhler
      • Re: Maxstar 150 ST , thinking of buying one but.., Vernon
    • Re: Maxstar 150 ST , thinking of buying one but.., enl_public
      • Re: Maxstar 150 ST , thinking of buying one but.., bob
      • Re: Maxstar 150 ST , thinking of buying one but.., bob
• Re: Critique my weld please, GDC
  • Re: Critique my weld please, Randy Zimmerman
    • Re: Critique my weld please, GDC
      • Re: Critique my weld please, JohnM
      • Re: Critique my weld please, GDC
• What size Shop A/C Unit . . . ., Steve DeMars
  • Re: What size Shop A/C Unit . . . ., Clif Holland
    • Re: What size Shop A/C Unit . . . ., me
  • Re: What size Shop A/C Unit . . . ., Steve Smith
• Harbor Freight "MIG" welder--Works!, Don W
  • Re: Harbor Freight "MIG" welder--Works!, RDF
    • Re: Harbor Freight "MIG" welder--Works!, Gunner Asch
  • Re: Harbor Freight "MIG" welder--Works!, Gary
• Steel Prices, MSU Spartan
• Removing Solar-B flux, Boris Mohar
  • Re: Removing Solar-B flux, cl
    • Re: Removing Solar-B flux, Boris Mohar
      • Re: Removing Solar-B flux, Drendle
      • Re: Removing Solar-B flux, cl
      • Re: Removing Solar-B flux, Boris Mohar
      • Re: Removing Solar-B flux, cl
      • Re: Removing Solar-B flux, cl
      • Re: Removing Solar-B flux, Ernie Leimkuhler
      • Re: Removing Solar-B flux, cl
      • Re: Removing Solar-B flux, Boris Mohar
      • Re: Removing Solar-B flux, cl
      • Re: Removing Solar-B flux, Ernie Leimkuhler
• Cutting Steel Tub, jcrichto
  • Re: Cutting Steel Tub, Grant Erwin
    • Re: Cutting Steel Tub, jcrichto
      • Re: Cutting Steel Tub, Grant Erwin
  • Re: Cutting Steel Tub, RoyJ
    • Re: Cutting Steel Tub, jcrichto
      • Re: Cutting Steel Tub, RDF
      • Re: Cutting Steel Tub, RoyJ
      • Re: Cutting Steel Tub, Pat
      • Re: Cutting Steel Tub, jcrichto
      • Re: Cutting Steel Tub, ATP*
      • Re: Cutting Steel Tub, dcaster
  • Re: Cutting Steel Tub, jcrichto
    • Re: Cutting Steel Tub, Leo Lichtman
      • Re: Cutting Steel Tub, RoyJ
      • Re: Cutting Steel Tub, RDF
      • Re: Cutting Steel Tub, Gunner Asch
      • Re: Cutting Steel Tub, dlwilson
      • Re: Cutting Steel Tub, RoyJ
      • Re: Cutting Steel Tub, Martin H. Eastburn
      • Re: Cutting Steel Tub, JohnM
      • Re: Cutting Steel Tub, David Todtman
      • Re: Cutting Steel Tub, JohnM
      • Re: Cutting Steel Tub, Leo Lichtman
      • Re: Cutting Steel Tub, ATP*
      • Re: Cutting Steel Tub, Gunner
• Thin sheet metal...beginner..., scottinhim
  • Re: Thin sheet metal...beginner..., buke9
  • Re: Thin sheet metal...beginner..., acrobat ants
    • Re: Thin sheet metal...beginner..., scottinhim
  • Re: Thin sheet metal...beginner..., clutchglass@xxxxxxxxx
• Abrasive chart, me
• Color of SS welds, Peter Grey
  • Re: Color of SS welds, AMW
    • Re: Color of SS welds, Peter Grey
  • Re: Color of SS welds, richard . smith . met
  • Re: Color of SS welds, Ernie Leimkuhler
  • Re: Color of SS welds, acrobat ants
  • Re: Color of SS welds, Boris Mohar
• Welding certification and next step, Peter Grey
  • Re: Welding certification and next step, Artemia Salina
    • Re: Welding certification and next step, Peter Grey
    • Re: Welding certification and next step, Peter Grey
      • Re: Welding certification and next step, RDF
  • Re: Welding certification and next step, Ernie Leimkuhler
• Why would a..., cl
  • Re: Why would a..., MetalHead
• grinding wheel for tungsten, me
  • Re: grinding wheel for tungsten, Gunner Asch
• Questions on Welding 1" HRS Plate, Artemia Salina
  • Re: Questions on Welding 1" HRS Plate, Grant Erwin
    • Re: Questions on Welding 1" HRS Plate, Artemia Salina
  • Re: Questions on Welding 1" HRS Plate, R. Zimmerman
    • Re: Questions on Welding 1" HRS Plate, RoyJ
    • Re: Questions on Welding 1" HRS Plate, Leo Lichtman
      • Re: Questions on Welding 1" HRS Plate, R. Zimmerman
      • Re: Questions on Welding 1" HRS Plate, Artemia Salina
      • Re: Questions on Welding 1" HRS Plate, RoyJ
  • Re: Questions on Welding 1" HRS Plate, dcaster
• fs:Katolight 10 kw Generator 231 hrs., drb
• CHT 100, glensmith
  • Re: CHT 100, Ernie Leimkuhler
• Welding aircraft tubing book, John Noon
  • Re: Welding aircraft tubing book, John Noon
• For your consideration -, Michael Horowitz
• Fire brick/quarry tile?, Michael Horowitz
  • Re: Fire brick/quarry tile?, RoyJ
• Regulator "accident", Jeremy Samuels
  • Re: Regulator "accident", RDF
  • Re: Regulator "accident", JohnM
  • Re: Regulator "accident", cl
• I survived another summer of teaching., Ernie Leimkuhler
  • Re: I survived another summer of teaching., R. Zimmerman
• OT LED flashlights, Randy Zimmerman
  • Re: OT LED flashlights, Steve Smith
    • Re: OT LED flashlights, RDF
      • Re: OT LED flashlights, John T
  • Message not available
    • Re: OT LED flashlights, Too_Many_Tools
      • Re: OT LED flashlights, enl_public
  • Message not available
    • Re: OT LED flashlights, Ted Edwards
• FA Roll Bender, tbone
  • Re: FA Roll Bender, steamer
• Is it possible/safe to mount a grinding disc on a circular saw?, Michael Horowitz
  • Re: Is it possible/safe to mount a grinding disc on a circular saw?, ATP*
  • Re: Is it possible/safe to mount a grinding disc on a circular saw?, RAM^3
    • Re: Is it possible/safe to mount a grinding disc on a circular saw?, Michael Horowitz
• Ernie's Notching Grinder, mhorowit
  • Re: Ernie's Notching Grinder, R. Zimmerman
    • Re: Ernie's Notching Grinder, Michael Horowitz
• ? aligning joints at either end?, mhorowit
  • Re: ? aligning joints at either end?, Grant Erwin
  • Re: ? aligning joints at either end?, Randy Zimmerman
  • Re: ? aligning joints at either end?, steamer
  • Re: ? aligning joints at either end?, Diamond Jim
    • Re: ? aligning joints at either end?, Jess
• Why stick welding on ships..., Bart D. Hull
  • Re: Why stick welding on ships..., Randy Zimmerman
  • Re: Why stick welding on ships..., Ernie Leimkuhler
    • Re: Why stick welding on ships..., Grant Erwin
  • Re: Why stick welding on ships..., carl mciver
    • Re: Why stick welding on ships..., Grant Erwin
      • Re: Why stick welding on ships..., ATP*
      • Re: Why stick welding on ships..., Randy Zimmerman
      • Re: Why stick welding on ships..., ATP*
      • Re: Why stick welding on ships..., JTMcC
      • Re: Why stick welding on ships..., Grant Erwin
      • Re: Why stick welding on ships..., Randy Zimmerman
      • welding certs & welder price (was "Re: Why stick welding on ships..."), Grant Erwin
      • Re: welding certs & welder price (was "Re: Why stick welding on ships..."), Randy Zimmerman
      • Re: welding certs & welder price (was "Re: Why stick welding on ships..."), Ernie Leimkuhler
      • Re: welding certs & welder price (was "Re: Why stick welding on ships..."), Greg M
      • Re: Why stick welding on ships..., RoyJ
      • Re: Why stick welding on ships..., Gunner Asch
• cutting a fishmouth joint, Michael Horowitz
  • Re: cutting a fishmouth joint, Grant Erwin
    • Re: cutting a fishmouth joint, dlwilson
      • Re: cutting a fishmouth joint, Ken Moffett
      • Re: cutting a fishmouth joint, Grant Erwin
      • Re: cutting a fishmouth joint, Ken Moffett
  • Re: cutting a fishmouth joint, Vernon
    • Re: cutting a fishmouth joint, Grant Erwin
      • Re: cutting a fishmouth joint, cl
    • Re: cutting a fishmouth joint, Martin H. Eastburn
      • Re: cutting a fishmouth joint, Vernon
      • Re: cutting a fishmouth joint, Martin H. Eastburn
• making a welding bench?, GDC
  • Re: making a welding bench?, Emmo
    • Re: making a welding bench?, Gerald Cooper
  • Re: making a welding bench?, David Todtman
  • Re: making a welding bench?, Gunner
    • Re: making a welding bench?, GDC
      • Re: making a welding bench?, Randy Zimmerman
      • Re: making a welding bench?, Martin H. Eastburn
  • Re: making a welding bench?, DanG
    • Re: making a welding bench?, Gunner Asch
    • Re: making a welding bench?, steamer
  • Re: making a welding bench?, Don D.
    • Re: making a welding bench?, Michael Horowitz
      • Re: making a welding bench?, Don D.
    • Re: making a welding bench?, Pit Builder
• 4130 tubing as filler?, mhorowit
  • Re: 4130 tubing as filler?, Ernie Leimkuhler
  • 4130 tubing as filler? 4130 FAQ link, John Noon
    • Re: 4130 tubing as filler? 4130 FAQ link, John T
• mig welding pliers?, Grant Erwin
  • Re: mig welding pliers?, Wayne Cook
  • Re: mig welding pliers?, James Walsh Jr.
  • Re: mig welding pliers?, dcaster
  • Re: mig welding pliers?, Tom Lawrence
  • Re: mig welding pliers?, SteveB
  • Re: mig welding pliers?, wmbjk
  • Re: mig welding pliers?, Keith Marshall
  • Re: mig welding pliers?, Randy Zimmerman
  • Re: mig welding pliers?, jpolaski
    • Re: mig welding pliers?, Don D.
  • Re: mig welding pliers?, Diamond Jim
• Plasma Cutter, John Caffrey
  • Re: Plasma Cutter, Ernie Leimkuhler
    • Re: Plasma Cutter, John Caffrey
• MM210 ROCKS!!, GDC
  • Re: MM210 ROCKS!!, Tom Lawrence
  • Re: MM210 ROCKS!!, SteveB
  • Re: MM210 ROCKS!!, RoyJ
    • Re: MM210 ROCKS!!, Tom Lawrence
    • Re: MM210 ROCKS!!, BoyntonStu
      • Re: MM210 ROCKS!!, RoyJ
      • Re: MM210 ROCKS!!, RoyJ
      • Re: MM210 ROCKS!!, BoyntonStu
      • Re: MM210 ROCKS!!, RoyJ
      • Re: MM210 ROCKS!!, BoyntonStu
      • Re: MM210 ROCKS!!, BoyntonStu
      • Re: MM210 ROCKS!!, RoyJ
      • Re: MM210 ROCKS!!, BoyntonStu
• DIY Handcart?, Michael Horowitz
  • Re: DIY Handcart?, Larry
• CV welding auto exhaust, Don W
  • Re: CV welding auto exhaust, Don W
    • Re: CV welding auto exhaust, MES
      • Re: CV welding auto exhaust, Don W
      • Re: CV welding auto exhaust, Pete C.
    • Re: CV welding auto exhaust, Randy Zimmerman
      • Re: CV welding auto exhaust, Don W
• What shielding gas for MIG?, GDC
  • Re: What shielding gas for MIG?, Emmo
    • Re: What shielding gas for MIG?, Jeff Sellers
  • Re: What shielding gas for MIG?, Dan
    • Re: What shielding gas for MIG?, GDC
      • Re: What shielding gas for MIG?, SteveB
      • Re: What shielding gas for MIG?, ATP*
  • Re: What shielding gas for MIG?, James Walsh Jr.
  • Re: What shielding gas for MIG?, JohnM
    • Re: What shielding gas for MIG?, Gunner
• Practicing on conduit, mhorowit
  • Re: Practicing on conduit, Jeff Sellers
  • Re: Practicing on conduit, footy
  • Re: Practicing on conduit, Michael Horowitz
    • Re: Practicing on conduit, Sparkeee24
    • Re: Practicing on conduit, Leo Lichtman
      • Re: Practicing on conduit, David Todtman
      • Re: Practicing on conduit, William Wixon
      • Re: Practicing on conduit, Leo Lichtman
      • Re: Practicing on conduit, David Todtman
• OT: Burning Man?, steamer
  • Re: Burning Man?, Emmo
  • Re: OT: Burning Man?, Ernie Leimkuhler
    • Re: OT: Burning Man?, RDF
      • Re: OT: Burning Man?, Emmo
• TIG welder choice, signaturefactory
  • Re: TIG welder choice, Ernie Leimkuhler
    • Re: TIG welder choice, signaturefactory
• Lincoln Squarewave 175, David keyen
  • Re: Lincoln Squarewave 175, Emmo
  • Re: Lincoln Squarewave 175, Ernie Leimkuhler
    • Re: Lincoln Squarewave 175, richard . smith . met
  • Re: Lincoln Squarewave 175, Brian
    • Re: Lincoln Squarewave 175, me
      • Re: Lincoln Squarewave 175, Jeff Sellers
      • Re: Lincoln Squarewave 175, RoyJ
• transporting acetylene, Michael Horowitz
  • Re: transporting acetylene, Grant Erwin
    • Re: transporting acetylene, JTMcC
      • Re: transporting acetylene, Grant Erwin
      • Re: transporting acetylene, JTMcC
      • Re: transporting acetylene, JTMcC
      • Re: transporting acetylene, Grant Erwin
      • Re: transporting acetylene, dcaster
      • Re: transporting acetylene, carl mciver
      • Re: transporting acetylene, wmbjk
      • Re: transporting acetylene, Jess
      • Re: transporting acetylene, JTMcC
  • Re: transporting acetylene, Jeff Sellers
    • Re: transporting acetylene, jpolaski
  • Re: transporting acetylene, John
    • Re: transporting acetylene, Leo Lichtman
      • Re: transporting acetylene, carl mciver
      • Message not available
      • Re: transporting acetylene, JTMcC
  • Re: transporting acetylene, Pat
• multiple tube joints, Brian
  • Re: multiple tube joints, Owen Davies
    • Re: multiple tube joints, RoyJ
      • Re: multiple tube joints, Tim Wescott
    • Re: multiple tube joints, steamer
      • Re: multiple tube joints, Owen Davies
      • Re: multiple tube joints, RoyJ
      • Re: multiple tube joints, steamer
      • Re: multiple tube joints, steamer
      • Re: multiple tube joints, Brian
      • Re: multiple tube joints, Owen Davies
      • Re: multiple tube joints, carl mciver
      • Re: multiple tube joints, Diamond Jim
      • Re: multiple tube joints, John T
      • Re: multiple tube joints, John Noon
• WalkingTheCup, revisited, post
  • Re: WalkingTheCup, revisited, Keith Marshall
    • Re: WalkingTheCup, revisited, John
      • Re: WalkingTheCup, revisited, post
      • Re: WalkingTheCup, revisited, John
      • GTAW Skills Development, John Noon
• Want to learn tig Welding, C
  • Re: Want to learn tig Welding, richard . smith . met
• 1995 Aerowave for sale, RDF
  • Re: 1995 Aerowave for sale, Ernie Leimkuhler
    • Re: 1995 Aerowave for sale, steamer
  • Re: 1995 Aerowave for sale, williamhenry
    • Re: 1995 Aerowave for sale, RDF
      • Re: 1995 Aerowave for sale, williamhenry
      • Re: 1995 Aerowave for sale, RDF
      • Re: 1995 Aerowave for sale, RDF
      • Re: 1995 Aerowave for sale, MK1
• Millermatic 210, GDC
  • Re: Millermatic 210, SteveB
  • Re: Millermatic 210, JohnM
  • Re: Millermatic 210, RDF
  • Re: Millermatic 210, Paul T.
    • Re: Millermatic 210, RDF
      • Re: Millermatic 210, Ernie Leimkuhler
      • Re: Millermatic 210, Martin H. Eastburn
  • Re: Millermatic 210, GDC
    • Re: Millermatic 210, SteveB
  • Re: Millermatic 210, HotRod
    • Re: Millermatic 210, Jeff Dantzler
• Electrode for sand rail chassis?, BoyntonStu
  • Re: Electrode for sand rail chassis?, JohnM
    • Re: Electrode for sand rail chassis?, SteveB
  • Re: Electrode for sand rail chassis?, Artemia Salina
    • Re: Electrode for sand rail chassis?, BoyntonStu
      • Re: Electrode for sand rail chassis?, SteveB
      • Re: Electrode for sand rail chassis?, Artemia Salina
      • Re: Electrode for sand rail chassis?, BoyntonStu
      • Re: Electrode for sand rail chassis?, Artemia Salina
      • Re: Electrode for sand rail chassis?, BoyntonStu
      • Re: Electrode for sand rail chassis?, JTMcC
      • Re: Electrode for sand rail chassis?, RDF
      • Re: Electrode for sand rail chassis?, RDF
      • Re: Electrode for sand rail chassis?, Andy Dingley
      • Re: Electrode for sand rail chassis?, Brian
      • Re: Electrode for sand rail chassis?, Andy Dingley
      • Re: Electrode for sand rail chassis?, Brian
  • Re: Electrode for sand rail chassis?, Ernie Leimkuhler
  • Re: Electrode for sand rail chassis?, Vernon
    • Re: Electrode for sand rail chassis?, Jeff Sellers
      • Re: Electrode for sand rail chassis?, Brian
      • Re: Electrode for sand rail chassis?, Jeff Sellers
      • Re: Electrode for sand rail chassis?, Brian
      • Re: Electrode for sand rail chassis?, Jeff Sellers
• brazing cast iron, Randy Zimmerman
  • Re: brazing cast iron, Wayne Cook
    • Re: brazing cast iron, Randy Zimmerman
      • Re: brazing cast iron, Wayne Cook
      • Re: brazing cast iron, JohnM
      • Re: brazing cast iron, Wayne Cook
      • Re: brazing cast iron, JohnM
      • Re: brazing cast iron, Wayne Cook
      • Re: brazing cast iron, John Noon
      • Re: brazing cast iron, Wayne Cook
      • Re: brazing cast iron, Gunner Asch
      • Re: brazing cast iron, JohnM
      • Re: brazing cast iron, Diamond Jim
      • Re: brazing cast iron, williamhenry
      • Re: brazing cast iron, Wayne Cook
  • Re: brazing cast iron, Vernon
    • Re: brazing cast iron, Wayne Cook
• Added some dropbox items today Hypertherm 600 fine cut in copper, Martin H. Eastburn
• Tigging Tailpipe, steamer
  • Re: Tigging Tailpipe, Randy Zimmerman
  • Re: Tigging Tailpipe, JohnM
• Invitation to visit Metal Web News, William Gray
• welding C channel and rect tubing, Ken Hilson
  • Re: welding C channel and rect tubing, Randy Zimmerman
    • Re: welding C channel and rect tubing, Vernon
      • Re: welding C channel and rect tubing, SteveB
      • OT Re: welding C channel and rect tubing, Randy Zimmerman
      • Re: OT Re: welding C channel and rect tubing, Vernon
    • Re: welding C channel and rect tubing, Ken Hilson
      • Re: welding C channel and rect tubing, RoyJ
      • Re: welding C channel and rect tubing, Ken Hilson
• flame cut small square hole, Fox
  • Re: flame cut small square hole, SteveB
    • Re: flame cut small square hole, JohnM
  • Re: flame cut small square hole, Grant Erwin
  • Re: flame cut small square hole, carl mciver
  • Re: flame cut small square hole, RoyJ
    • Re: flame cut small square hole, Pete
  • Re: flame cut small square hole, DanG
• That HF TIG again..., carl mciver
  • Re: That HF TIG again..., SteveB
  • Re: That HF TIG again..., Vernon
    • Re: That HF TIG again..., Keith Marshall
      • Re: That HF TIG again..., Diamond Jim
      • Re: That HF TIG again..., Vernon
      • Re: That HF TIG again..., carl mciver
  • Re: That HF TIG again..., Vernon
• A picture for your enjoyment, SteveB
  • Re: A picture for your enjoyment, Wayne Cook
    • Re: A picture for your enjoyment, SteveB
    • Re: A picture for your enjoyment, Martin H. Eastburn
      • Re: A picture for your enjoyment, SteveB
      • Re: A picture for your enjoyment, Gunner
      • Re: A picture for your enjoyment, SteveB
• One hundred and one TIG questions, Vernon
  • Re: One hundred and one TIG questions, Keith Marshall
    • Re: One hundred and one TIG questions, Vernon
      • Re: One hundred and one TIG questions, Randy Zimmerman
      • Re: One hundred and one TIG questions, Keith Marshall
      • Re: One hundred and one TIG questions, Keith Marshall
      • Re: One hundred and one TIG questions, dcaster
      • Re: One hundred and one TIG questions, mlcorson
      • Re: One hundred and one TIG questions, Emmo
      • Re: One hundred and one TIG questions, Boris Mohar
      • Re: One hundred and one TIG questions, mlcorson
  • Re: One hundred and one TIG questions, bitternut
    • Re: One hundred and one TIG questions, Vernon
      • Re: One hundred and one TIG questions, Gunner
      • Re: One hundred and one TIG questions, Artemia Salina
  • Re: One hundred and one TIG questions, Gunner
    • Re: One hundred and one TIG questions, Vernon
      • Re: One hundred and one TIG questions, Emmo
      • Re: One hundred and one TIG questions, Vernon
      • Re: One hundred and one TIG questions, Brian
      • Re: One hundred and one TIG questions, Peter Grey
      • Re: One hundred and one TIG questions, Gunner
      • Re: One hundred and one TIG questions, Vernon
      • Re: One hundred and one TIG questions, Vernon
  • Re: One hundred and one TIG questions, David Todtman
    • Re: One hundred and one TIG questions, Vernon
      • Re: One hundred and one TIG questions, Vernon
      • Re: One hundred and one TIG questions, Emmo
      • Re: One hundred and one TIG questions, carl mciver
      • Re: One hundred and one TIG questions, Bart D. Hull
      • Re: One hundred and one TIG questions, Vernon
  • Re: One hundred and one TIG questions, fatumsch
    • Re: One hundred and one TIG questions, Vernon
  • Re: One hundred and one TIG questions, Ernie Leimkuhler
    • Re: One hundred and one TIG questions, Vernon
      • Re: One hundred and one TIG questions, Ernie Leimkuhler
• help me on setting Lincoln Invertec V205-T AC/DC, Atomino
  • Re: help me on setting Lincoln Invertec V205-T AC/DC, Atomino
  • Re: help me on setting Lincoln Invertec V205-T AC/DC, JohnM
    • Re: help me on setting Lincoln Invertec V205-T AC/DC, Atomino
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, Artemia Salina
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, JohnM
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, Atomino
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, Vernon
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, Ernie Leimkuhler
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, Vernon
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, Ernie Leimkuhler
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, Atomino
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, Atomino
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, post
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, Atomino
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, post
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, Atomino
  • Re: help me on setting Lincoln Invertec V205-T AC/DC, dcaster
    • Re: help me on setting Lincoln Invertec V205-T AC/DC, Atomino
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, Atomino
      • Re: help me on setting Lincoln Invertec V205-T AC/DC, dcaster
• cleaning of slag?, henning wright
  • Re: cleaning of slag?, RoyJ
  • Re: cleaning of slag?, SteveB
  • Re: cleaning of slag?, Randy Zimmerman
    • Re: cleaning of slag?, Vernon
      • Re: cleaning of slag?, Randy Zimmerman
      • Re: cleaning of slag?, Vernon
      • Re: cleaning of slag?, SteveB
      • Re: cleaning of slag?, RoyJ
      • Re: cleaning of slag?, richard . smith . met
  • Re: cleaning of slag?, footy
    • Re: cleaning of slag?, henning wright
      • Re: cleaning of slag?, Randy Zimmerman
      • Re: cleaning of slag?, RoyJ
      • Re: cleaning of slag?, carl mciver
• Mig welding with a generator - any problems? advice? comments?, Doorbell
• Miller Maxstar 140 amperage adjustable while hot?, Vernon
  • Re: Miller Maxstar 140 amperage adjustable while hot?, dcaster
    • Re: Miller Maxstar 140 amperage adjustable while hot?, JohnM
  • Re: Miller Maxstar 140 amperage adjustable while hot?, Andrew H. Wakefield
    • Re: Miller Maxstar 140 amperage adjustable while hot?, stag5353
      • Re: Miller Maxstar 140 amperage adjustable while hot?, Vernon
    • Re: Miller Maxstar 140 amperage adjustable while hot?, Vernon
      • Re: Miller Maxstar 140 amperage adjustable while hot?, Andrew H. Wakefield
• need miller help, williamhenry
  • Re: need miller help, joebass
  • Re: need miller help, MetalHead
• Hydraulics for a Pro-tools/ JD-squared bender, stag5353
  • Re: Hydraulics for a Pro-tools/ JD-squared bender, RoyJ
  • Re: Hydraulics for a Pro-tools/ JD-squared bender, JohnM
  • Re: Hydraulics for a Pro-tools/ JD-squared bender, RDF
    • Re: Hydraulics for a Pro-tools/ JD-squared bender, stag5353
      • Re: Hydraulics for a Pro-tools/ JD-squared bender, williamhenry
  • Re: Hydraulics for a Pro-tools/ JD-squared bender, habbi
• miller maxstar 200 dx + switched water cooler, .
• black pipe, ends not threaded, hard to thread. Structural grade?, Spud
  • Re: black pipe, ends not threaded, hard to thread. Structural grade?, Gunner
    • Re: black pipe, ends not threaded, hard to thread. Structural grade?, Tim Wescott
      • Re: black pipe, ends not threaded, hard to thread. Structural grade?, Gunner
  • Re: black pipe, ends not threaded, hard to thread. Structural grade?, RoyJ
• my mig beads aren't pretty, dlwilson
  • Re: my mig beads aren't pretty, SteveB
    • Re: my mig beads aren't pretty, JohnM
      • Re: my mig beads aren't pretty, dlwilson
      • Re: my mig beads aren't pretty, SteveB
      • Re: my mig beads aren't pretty, dlwilson
      • Re: my mig beads aren't pretty, SteveB
      • Re: my mig beads aren't pretty, Leo Lichtman
      • Re: my mig beads aren't pretty, Vernon
  • Re: my mig beads aren't pretty, gr8tek
    • Re: my mig beads aren't pretty, SteveB
  • Re: my mig beads aren't pretty, wallster
• Setting Invertec V205 for welding aluminium plate of tickness mm.1.5, Atomino
• I can make pretty lines but still cannot join metal., BoyntonStu
  • Re: I can make pretty lines but still cannot join metal., RDF
  • Re: I can make pretty lines but still cannot join metal., carl mciver
    • Re: I can make pretty lines but still cannot join metal., SteveB
      • Re: I can make pretty lines but still cannot join metal., Andrew H. Wakefield
      • Re: I can make pretty lines but still cannot join metal., SteveB
      • Re: I can make pretty lines but still cannot join metal., Andrew H. Wakefield
  • Re: I can make pretty lines but still cannot join metal., dcaster
  • Re: I can make pretty lines but still cannot join metal., JohnM
  • Re: I can make pretty lines but still cannot join metal., Andrew H. Wakefield
    • Re: I can make pretty lines but still cannot join metal., BoyntonStu
      • Re: I can make pretty lines but still cannot join metal., SteveB
      • Re: I can make pretty lines but still cannot join metal., Andy
      • Re: I can make pretty lines but still cannot join metal., BoyntonStu
      • Re: I can make pretty lines but still cannot join metal., RoyJ
  • Re: I can make pretty lines but still cannot join metal., Vernon
    • Re: I can make pretty lines but still cannot join metal., Sparkeee24
• An Interesting Couple of Days, SteveB
  • Re: An Interesting Couple of Days, Leo Lichtman
    • Re: An Interesting Couple of Days, Randy Zimmerman
    • Re: An Interesting Couple of Days, SteveB
      • Re: An Interesting Couple of Days, Leo Lichtman
      • Re: An Interesting Couple of Days, JohnM
      • Re: An Interesting Couple of Days, SteveB
      • Re: An Interesting Couple of Days, JohnM
      • Re: An Interesting Couple of Days, SteveB
      • Re: An Interesting Couple of Days, Gunner
      • Re: An Interesting Couple of Days, JohnM
• TIG Newbie: Bad Machine, or My Error?, Artemia Salina
  • Re: TIG Newbie: Bad Machine, or My Error?, Michelle P
    • Re: TIG Newbie: Bad Machine, or My Error?, RDF
  • Re: TIG Newbie: Bad Machine, or My Error?, Steve W.
  • Re: TIG Newbie: Bad Machine, or My Error?, JohnM
    • Re: TIG Newbie: Bad Machine, or My Error?, Artemia Salina
      • Re: TIG Newbie: Bad Machine, or My Error?, Gunner
      • Re: TIG Newbie: Bad Machine, or My Error?, Mickey
      • Re: TIG Newbie: Bad Machine, or My Error?, Artemia Salina
      • Re: TIG Newbie: Bad Machine, or My Error?, RDF
      • Re: TIG Newbie: Bad Machine, or My Error?, Artemia Salina
      • Re: TIG Newbie: Bad Machine, or My Error?, Gunner
      • Re: TIG Newbie: Bad Machine, or My Error?, Martin H. Eastburn
• Cambering Beams Info Required, shop
  • Re: Cambering Beams Info Required, enl_public
    • Re: Cambering Beams Info Required, John Noon
      • Re: Cambering Beams Info Required, Randy Zimmerman
      • Re: Cambering Beams Info Required, John Noon
      • Re: Cambering Beams Info Required, JohnM
      • Re: Cambering Beams Info Required, Andrew H. Wakefield
      • Re: Cambering Beams Info Required, John Noon
      • Re: Cambering Beams Info Required, JohnM
      • Re: Cambering Beams Info Required, Ernie Leimkuhler
      • Distortion of weldments, John Noon
      • Re: Distortion of weldments, Randy Zimmerman
      • Re: Distortion of weldments, Wayne Cook
      • Re: Distortion of weldments, John Noon
      • Distortion of weldments file type up loaded, John Noon
  • Re: Cambering Beams Info Required, Randy Zimmerman
  • Re: Cambering Beams Info Required, John Caffrey
• Keyhole welding, shop
  • Re: Keyhole welding, HotRod
• Pictures of welding skill, cl
  • Re: Pictures of welding skill, AMW
    • Re: Pictures of welding skill, rparz
• Lincoln LN-7, DanG
  • Re: Lincoln LN-7, Randy Zimmerman
  • Re: Lincoln LN-7, Ernie Leimkuhler
• FAO Randy & Vernon, Balders
  • Re: FAO Randy & Vernon, Randy Zimmerman
    • Re: FAO Randy & Vernon, Balders
      • Re: FAO Randy & Vernon, Randy Zimmerman
    • Re: FAO Randy & Vernon, carl mciver
    • Re: FAO Randy & Vernon, Vernon
  • Re: FAO Randy & Vernon, RoyJ
    • Re: FAO Randy & Vernon, dlwilson
  • Re: FAO Randy & Vernon, Vernon
    • Re: FAO Randy & Vernon, Randy Zimmerman
• Newbie can't see weld pool, mclorson
  • Re: Newbie can't see weld pool, footy
    • Re: Newbie can't see weld pool, Leo Lichtman
      • Re: Newbie can't see weld pool, SteveB
      • Re: Newbie can't see weld pool, Gunner
  • Re: Newbie can't see weld pool, AMW
  • Re: Newbie can't see weld pool, Ernie Leimkuhler
    • Re: Newbie can't see weld pool, mclorson
• inconel 617 tig wire question, someone
  • Re: inconel 617 tig wire question, Ernie Leimkuhler
• Lincoln AC-225 D.O.M., John Strunck
• The HTS 2000 I have been pimping, RDF
  • Re: The HTS 2000 I have been pimping, Rick
    • Re: The HTS 2000 I have been pimping, RDF
• Crack in Aluminium Crankcase (MIG help), Balders
  • Re: Crack in Aluminium Crankcase (MIG help), Randy Zimmerman
    • Re: Crack in Aluminium Crankcase (MIG help), Balders
      • Re: Crack in Aluminium Crankcase (MIG help), RoyJ
      • Re: Crack in Aluminium Crankcase (MIG help), Balders
      • Re: Crack in Aluminium Crankcase (MIG help), Tim Wescott
      • Re: Crack in Aluminium Crankcase (MIG help), kenny
      • Re: Crack in Aluminium Crankcase (MIG help), Randy Zimmerman
    • Re: Crack in Aluminium Crankcase (MIG help), Vernon
      • Re: Crack in Aluminium Crankcase (MIG help), stans4
      • Re: Crack in Aluminium Crankcase (MIG help), Randy Zimmerman
      • Re: Crack in Aluminium Crankcase (MIG help), RoyJ
  • Re: Crack in Aluminium Crankcase (MIG help), RDF
    • Re: Crack in Aluminium Crankcase (MIG help), Balders
      • Re: Crack in Aluminium Crankcase (MIG help), Brian
      • Re: Crack in Aluminium Crankcase (MIG help), RDF
• Buying O/A tanks for a torch in Minnesota, Mickey
  • Re: Buying O/A tanks for a torch in Minnesota, RoyJ
    • Re: Buying O/A tanks for a torch in Minnesota, Mickey
      • Re: Buying O/A tanks for a torch in Minnesota, Eide
• aluminum to steel, Rusted
  • Re: aluminum to steel, RDF
    • Re: aluminum to steel, Balders
      • Re: aluminum to steel, RDF
      • Re: aluminum to steel, cl
      • Re: aluminum to steel, RDF
      • Re: aluminum to steel, cl
      • Re: aluminum to steel, RDF
      • Re: aluminum to steel, cl
      • Re: aluminum to steel, Balders
  • Re: aluminum to steel, Rich Lockyer
• Using Paintball Cylinder for MIG, Jeremy Samuels
  • Re: Using Paintball Cylinder for MIG, dcaster
    • Re: Using Paintball Cylinder for MIG, Jeremy Samuels
      • Re: Using Paintball Cylinder for MIG, dcaster
      • Re: Using Paintball Cylinder for MIG, JohnM
• welding cart, john noon
  • Re: welding cart, Martin H. Eastburn
    • Re: welding cart, AL
      • Re: welding cart, Martin H. Eastburn
      • Re: welding cart, Grant Erwin
• Electrode Help, Marlin \(N5XJD\)
  • Re: Electrode Help, enl_public
• Thermal Arc 250 GTSW, donb
  • Re: Thermal Arc 250 GTSW, Ernie Leimkuhler
• Inverter TIG welder design details ..., Mike Fields
  • Re: Inverter TIG welder design details ..., RoyJ
• welding fume litigation, Emmo
  • Re: welding fume litigation, Andrew H. Wakefield
  • Re: welding fume litigation, dcaster
  • Re: welding fume litigation, Dave Mundt
• OT: But I had to share this,, RDF
  • Re: But I had to share this,, Eide
    • Re: But I had to share this,, Pete C.
      • Re: But I had to share this,, RDF
  • Re: OT: But I had to share this,, JohnM
• 6010 -comments, please, Jim L.
  • Re: 6010 -comments, please, Grant Erwin
    • Re: 6010 -comments, please, Gunner
  • Re: 6010 -comments, please, alphonse
    • Re: 6010 -comments, please, richard . smith . met
    • Re: 6010 -comments, please, BoyntonStu
      • Re: 6010 -comments, please, richard . smith . met
      • Re: 6010 -comments, please, Randy Zimmerman
      • Re: 6010 -comments, please, JohnM
      • Re: 6010 -comments, please, richard . smith . met
• OT: Miller Bobcat 250 NT forsale w/wirefeeder and trailer, domingomontez
• oxy/Acetelyne welding 1/2 inch steel, rick . deshon
  • Re: oxy/Acetelyne welding 1/2 inch steel, Leo Lichtman
  • Re: oxy/Acetelyne welding 1/2 inch steel, Grant Erwin
  • Re: oxy/Acetelyne welding 1/2 inch steel, Sam Perkins
  • Re: oxy/Acetelyne welding 1/2 inch steel, dcaster
  • Re: oxy/Acetelyne welding 1/2 inch steel, rick . deshon
• 2000+ SF Home and 849 SF Shop for sale, Mesa, AZ, Marty Escarcega
  • Re: 2000+ SF Home and 849 SF Shop for sale, Mesa, AZ, Andrew H. Wakefield
  • Re: 2000+ SF Home and 849 SF Shop for sale, Mesa, AZ, Andrew H. Wakefield
• Inert gas bottles, RDF
  • Re: Inert gas bottles, Bruce Sutton
  • Re: Inert gas bottles, Steve W.
  • Re: Inert gas bottles, MetalHead
    • Re: Inert gas bottles, Diamond Jim
      • Re: Inert gas bottles, MetalHead
      • Re: Inert gas bottles, Diamond Jim
      • Re: Inert gas bottles, Leo Lichtman
      • Re: Inert gas bottles, Andy Dingley
  • Re: Inert gas bottles, SteveB
• TIG question, on stainless, (Ernie?), acrobat ants
  • Re: TIG question, on stainless, (Ernie?), Mark Lorenz
    • Re: TIG question, on stainless, (Ernie?), Ernie Leimkuhler
      • Re: TIG question, on stainless, (Ernie?) supplemental :), Brian
      • Re: TIG question, on stainless, (Ernie?) supplemental :), acrobat ants
      • Re: TIG question, on stainless, (Ernie?) supplemental :), Ernie Leimkuhler
    • Re: TIG question, on stainless, (Ernie?), acrobat ants
• brass fittings for a DIY tig cooler, me
  • Re: brass fittings for a DIY tig cooler, MetalHead
  • Re: brass fittings for a DIY tig cooler, Ernie Leimkuhler
• Newbie Migweld Q?, HotRod
  • Re: Newbie Migweld Q?, James Walsh Jr.
    • Re: Newbie Migweld Q?, HotRod
      • Re: Newbie Migweld Q?, James Walsh Jr.
      • Re: Newbie Migweld Q?, HotRod
      • Re: Newbie Migweld Q?, Artemia Salina
      • Re: Newbie Migweld Q?, Andrew H. Wakefield
      • Re: Newbie Migweld Q?, HotRod
      • Re: Newbie Migweld Q?, acrobat ants
  • Re: Newbie Migweld Q?, HotRod
• Newbie 6011 dot problem, BoyntonStu
  • Re: Newbie 6011 dot problem, Randy Zimmerman
    • Re: Newbie 6011 dot problem, richard . smith . met
  • Re: Newbie 6011 dot problem, SteveB
    • Re: Newbie 6011 dot problem, SteveB
      • Re: Newbie 6011 dot problem, Jim L.
      • Re: Newbie 6011 dot problem, SteveB
      • Re: Newbie 6011 dot problem, Randy Zimmerman
      • Re: Newbie 6011 dot problem, SteveB
      • Re: Newbie 6011 dot problem, BoyntonStu
      • Re: Newbie 6011 dot problem, Ernie Leimkuhler
      • Re: Newbie 6011 dot problem, richard . smith . met
• I got another pretty laminated card., Ernie Leimkuhler
  • Re: I got another pretty laminated card., RDF
  • Re: I got another pretty laminated card., SteveB
  • Re: I got another pretty laminated card., JohnM
• Re: Keyhole welding with wire-feed, shop
• Ending a MIG weld, Ron DeBlock
  • Re: Ending a MIG weld, Randy Zimmerman
    • Re: Ending a MIG weld, Leo Lichtman
      • Re: Ending a MIG weld, Randy Zimmerman
      • Re: Ending a MIG weld, Gunner
      • Re: Ending a MIG weld, Ron DeBlock
      • Re: Ending a MIG weld, richard . smith . met
  • Re: Ending a MIG weld, James Walsh Jr.
• utility of 1941 welding textbook?, no_child_left_unleashed
  • Re: utility of 1941 welding textbook?, Randy Zimmerman
    • Re: utility of 1941 welding textbook?, Gunner
      • Re: utility of 1941 welding textbook?, RDF
    • Re: utility of 1941 welding textbook?, richard . smith . met
  • Re: utility of 1941 welding textbook?, Randy Zimmerman
    • Re: utility of 1941 welding textbook?, no_child_left_unleashed
      • Re: utility of 1941 welding textbook?, Randy Zimmerman
• Using aluminum Mig wire for fine TIG work, Dave Sage
  • Re: Using aluminum Mig wire for fine TIG work, mike
    • Re: Using aluminum Mig wire for fine TIG work, RDF
• Re: Another thought re: avoiding fires, Speechless
• TIG and inside corners, John
  • Re: TIG and inside corners, Pete C.
  • Re: TIG and inside corners, Ernie Leimkuhler
    • Re: TIG and inside corners, Richard
    • Re: TIG and inside corners, richard . smith . met
      • Re: TIG and inside corners, Ernie Leimkuhler
      • Re: TIG and inside corners, Gunner
      • Re: TIG and inside corners, Brian
    • Re: TIG and inside corners, pgrey
      • Re: TIG and inside corners, Pete C.
      • Re: TIG and inside corners, Ernie Leimkuhler
• Re: Question re. soapstone in welding, me
  • Re: Question re. soapstone in welding, Andy Dingley
• soapstone, me
• "sucker" flexible ducting source?, Grant Erwin
  • Re: "sucker" flexible ducting source?, Steve Smith
    • Re: "sucker" flexible ducting source?, Martin H. Eastburn
      • Re: "sucker" flexible ducting source?, Rick
  • Re: "sucker" flexible ducting source?, Keith Marshall
    • Re: "sucker" flexible ducting source?, me
      • Re: "sucker" flexible ducting source?, Grant Erwin
    • Re: "sucker" flexible ducting source?, Grant Erwin
      • Re: "sucker" flexible ducting source?, Keith Marshall
  • Re: "sucker" flexible ducting source?, carl mciver
    • Re: "sucker" flexible ducting source?, Grant Erwin
    • Re: "sucker" flexible ducting source?, JohnM
  • Re: "sucker" flexible ducting source?, Alex H. Sallwey
  • Re: "sucker" flexible ducting source?, Rick
    • Re: "sucker" flexible ducting source?, Steve W.
    • Re: "sucker" flexible ducting source?, me
  • Re: "sucker" flexible ducting source?, Gunner
    • Re: "sucker" flexible ducting source?, Grant Erwin
      • Re: "sucker" flexible ducting source?, Gunner
      • Re: "sucker" flexible ducting source?, me
      • Re: "sucker" flexible ducting source?, Grant Erwin
      • Re: "sucker" flexible ducting source?, Martin H. Eastburn
      • Re: "sucker" flexible ducting source?, Gunner
      • Re: "sucker" flexible ducting source?, Geoff M
      • Re: "sucker" flexible ducting source?, Rick
  • Re: "sucker" flexible ducting source?, Martin H. Eastburn
• tig cable cover fabric, me
  • Re: tig cable cover fabric, Martin H. Eastburn
  • Re: tig cable cover fabric, MetalHead
    • Re: tig cable cover fabric, Dennis van Dam
  • Re: tig cable cover fabric, sir.eggplantalot@xxxxxxxxx
  • Re: tig cable cover fabric, stans4
    • Re: tig cable cover fabric, Dennis van Dam
    • Re: tig cable cover fabric, Martin H. Eastburn
• bending stainless steel tubing, Brian
  • Re: bending stainless steel tubing, RoyJ
    • Re: bending stainless steel tubing, Brian
      • Re: bending stainless steel tubing, Ernie Leimkuhler
      • Re: bending stainless steel tubing, Brian
• Carbon arc -- now what?, Andrew H. Wakefield
  • Re: Carbon arc -- now what?, RoyJ
    • Re: Carbon arc -- now what?, Andrew H. Wakefield
  • Re: Carbon arc -- now what?, mb
    • Re: Carbon arc -- now what?, Andrew H. Wakefield
      • Re: Carbon arc -- now what?, Steve W.
      • Re: Carbon arc -- now what?, Diamond Jim
  • Re: Carbon arc -- now what?, RoyJ
    • Re: Carbon arc -- now what?, Andrew H. Wakefield
      • Re: Carbon arc -- now what?, RoyJ
      • Re: Carbon arc -- now what?, Bert
      • Re: Carbon arc -- now what?, RoyJ
      • Re: Carbon arc -- now what?, Andrew H. Wakefield
      • Re: Carbon arc -- now what?, Grant Erwin
  • Re: Carbon arc -- now what?, shop
    • Re: Carbon arc -- now what?, shop
• UNI-MIG welders - are they any good?, HughChapman
  • Re: UNI-MIG welders - are they any good?, John Crighton
    • Re: UNI-MIG welders - are they any good?, HughChapman
      • Re: UNI-MIG welders - are they any good?, John Crighton
      • Re: UNI-MIG welders - are they any good?, HughChapman
      • Re: UNI-MIG welders - are they any good?, HughChapman
      • Re: UNI-MIG welders - are they any good?, John Crighton
      • Re: UNI-MIG welders - are they any good?, Balders
      • Re: UNI-MIG welders - are they any good?, HughChapman
      • Re: UNI-MIG welders - are they any good?, Balders
      • Re: UNI-MIG welders - are they any good?, Balders
• Plasma Cam, John Marks
  • Re: Plasma Cam, RDF
    • Re: Plasma Cam, John Marks
      • Re: Plasma Cam, RDF
      • Re: Plasma Cam, John Marks
      • Re: Plasma Cam, Steve Smith
      • Re: Plasma Cam, RDF
      • Re: Plasma Cam, John Marks
      • Re: Plasma Cam, Martin H. Eastburn
      • Re: Plasma Cam, m5bmw
      • Re: Plasma Cam, John Marks
      • Re: Plasma Cam, m5bmw
      • Re: Plasma Cam, mclorson
      • Re: Plasma Cam, Eat at Sloppy Joes
  • Re: Plasma Cam, Sven
  • Re: Plasma Cam, AndrewV
• Flashback Arrestors, J. B.
  • Re: Flashback Arrestors, Eide
  • Re: Flashback Arrestors, Randy Zimmerman
    • Re: Flashback Arrestors, Keith Marshall
• Tig on dewar, steamer
  • Re: Tig on dewar, dogalone
    • Re: Tig on dewar, steamer
      • Re: Tig on dewar, williamhenry
      • Re: Tig on dewar, steamer
      • Re: Tig on dewar, richard . smith . met
      • Re: Tig on dewar, steamer
      • Re: Tig on dewar, Andy Dingley
      • Re: Tig on dewar, carl mciver
      • Re: Tig on dewar, Andy Dingley
      • Re: Tig on dewar, steamer
      • Re: Tig on dewar, JohnM
      • Re: Tig on dewar, richard . smith . met
      • Re: Tig on dewar, steamer
      • Re: Tig on dewar, Andy Dingley
      • Re: Tig on dewar, dcaster
      • Re: Tig on dewar, steamer
      • Re: Tig on dewar, dcaster
  • Re: Tig on dewar, Dev Null
  • Re: Tig on dewar, Peter Fairbrother
    • Re: Tig on dewar, steamer
      • Re: Tig on dewar, MetalHead
      • Re: Tig on dewar, steamer
• converting from air to water torch on the 185 lincoln tig, me
  • Re: converting from air to water torch on the 185 lincoln tig, Ernie Leimkuhler
    • Re: converting from air to water torch on the 185 lincoln tig, Potblak
• Nitrogen Gas Generator for Lead-Free Soldering, Charles L
• Practical Oxy Acetyline Welding 1938 FA, evans_susie
• gear repair question, ben carter
  • Re: gear repair question, Leo Lichtman
  • Re: gear repair question, Artemia Salina
    • Re: gear repair question, Leo Lichtman
    • Re: gear repair question, carl mciver
      • Re: gear repair question, Randy Zimmerman
      • Re: gear repair question, Andrew Mawson
  • Re: gear repair question, Grant Erwin
  • Re: gear repair question, williamhenry
  • Re: gear repair question, Andy Dingley
• Question about AGLEVTECH, Bert
  • Re: Question about AGLEVTECH, MetalHead
  • Re: Question about AGLEVTECH, bitternut
    • Re: Question about AGLEVTECH, RDF
  • Re: Question about AGLEVTECH, Pete C.
  • Re: Question about AGLEVTECH, Dev Null
• Oven Rack Warpage, Dave
• rec'd small DC 120 Volt welder, Doctor John
  • Re: rec'd small DC 120 Volt welder, Grant Erwin
    • Re: rec'd small DC 120 Volt welder, Gunner
      • Re: rec'd small DC 120 Volt welder, Grant Erwin
      • Re: rec'd small DC 120 Volt welder, Gunner
      • Re: rec'd small DC 120 Volt welder, Doctor John
      • Re: rec'd small DC 120 Volt welder, Grant Erwin
      • Re: rec'd small DC 120 Volt welder, Doctor John
      • Re: rec'd small DC 120 Volt welder, Eide
  • Re: rec'd small DC 120 Volt welder, John D
  • Re: rec'd small DC 120 Volt welder, MetalHead
• Slow throw 50a breaker?? regular HD ok??, me
  • Re: Slow throw 50a breaker?? regular HD ok??, RoyJ
    • Re: Slow throw 50a breaker?? regular HD ok??, me
  • Re: Slow throw 50a breaker?? regular HD ok??, billh
  • Re: Slow throw 50a breaker?? regular HD ok??, Ted Edwards
• GMAW Tip consumption, cl
• 14 pin compatibility, dogalone
  • Re: 14 pin compatibility, Pete C.
• 185 water cooler?, me
  • Re: 185 water cooler?, MetalHead
    • Re: 185 water cooler?, Gunner
  • Re: 185 water cooler?, Ernie Leimkuhler
    • Re: 185 water cooler?, acrobat ants
• Rosebud versus cutting tip for heating, sir.eggplantalot@xxxxxxxxx
  • Re: Rosebud versus cutting tip for heating, carl mciver
• Tig- converting to water cooled torch- help, Rooster
  • Re: Tig- converting to water cooled torch- help, Dennis van Dam
  • Re: Tig- converting to water cooled torch- help, Dennis van Dam
    • Re: Tig- converting to water cooled torch- help, Ernie Leimkuhler
      • Re: Tig- converting to water cooled torch- help, Dennis van Dam
• Re: Good deal or not?, acrobat ants
  • Re: Good deal or not?, Leo Lichtman
    • Re: Good deal or not?, JohnM
      • Re: Good deal or not?, John T
      • Re: Good deal or not?, Mike Swift
  • Re: Good deal or not?, Keith Marshall
• Re: Miller 210 question, acrobat ants
  • Re: Miller 210 question, RDF
• Re: How to reverse the weld-pak 3200 drive roller, acrobat ants
• Re: AWS Code Applicability, Shawn
  • <Possible follow-ups>
  • Re: AWS Code Applicability, Randy Zimmerman
    • Re: AWS Code Applicability, Jeff Sellers
      • Re: AWS Code Applicability, Randy Zimmerman
      • Re: AWS Code Applicability, Jeff Sellers
  • Re: AWS Code Applicability, footy
    • Re: AWS Code Applicability, Shawn
      • Re: AWS Code Applicability, RoyJ
      • Re: AWS Code Applicability, footy
      • Re: AWS Code Applicability, Shawn
• Re: Welding Cast Iron and others - new to all of this - add'l comment, Andy Dingley
• Re: Is it possible to tig pot metal?, Andy Dingley
  • Re: Is it possible to tig pot metal?, Gunner
    • Re: Is it possible to tig pot metal?, Andy Dingley
• Re: Making a headset band, Andy Dingley
• Re: Harbor Freight Tig, Diamond Jim
  • Re: Harbor Freight Tig, Glenn
    • Re: Harbor Freight Tig, Diamond Jim
  • <Possible follow-ups>
  • Re: Harbor Freight Tig, Ted Edwards
• Re: Help with brass, Dennis van Dam
  • Re: Help with brass, RoyJ
    • Re: Help with brass, Dennis van Dam
      • Re: Help with brass, RoyJ
      • Re: Help with brass, Dennis van Dam

We are proud to have Web Hosting and Rack Housing from 9 Net Avenue Deutschland.
(17)