sci.engr.joining.welding

• Thread Index

---

• Re: OA Filler rod for car repair
  • From: Kelley Mascher
• Re: Cutting advice please
  • From: Kelley Mascher
• Re: OA working pressure and a neutral flame
  • From: Leo Lichtman
• Re: Thermal impulse from quenching red hot steel rod in water
  • From: Leo Lichtman
• Re: Cutting advice please
  • From: Grant Erwin
• Re: OA working pressure and a neutral flame
  • From: mhorowit
• Re: TIG makes my fluorescent lights flicker...
  • From: acrobat ants
• Re: Thermal impulse from quenching red hot steel rod in water
  • From: JMV
• Re: OA Filler rod for car repair
  • From: Jim
• Re: Cutting advice please
  • From: Michael Horowitz
• Re: Cutting advice please
  • From: Michael Horowitz
• Re: OA working pressure and a neutral flame
  • From: Michael Horowitz
• Re: Thermal impulse from quenching red hot steel rod in water
  • From: Richard Smith
• Re: Thermal impulse from quenching red hot steel rod in water
  • From: s.morra
• Re: clarke spool gun welder
  • From: Artemia Salina
• Re: Thermal impulse from quenching red hot steel rod in water
  • From: Leo Lichtman
• Re: OA working pressure and a neutral flame
  • From: dcaster
• Re: Which Welder Do I Need?
  • From: Vernon
• Thermal impulse from quenching red hot steel rod in water
  • From: s.morra
• Re: Which Welder Do I Need?
  • From: Ron DeBlock
• Re: Welding aircraft exhaust, sucess!
  • From: Michelle P
• Re: Cutting advice please
  • From: R. Zimmerman
• OA working pressure and a neutral flame
  • From: Michael Horowitz
• Re: MIG feed roller groove
  • From: Wayne Cook
• Re: Cutting advice please
  • From: Michael Horowitz
• HF is messing with the circuits in the helmet
  • From: John Noon
• Re: clarke spool gun welder
  • From: habbi
• Re: clarke spool gun welder
  • From: Artemia Salina
• Re: name that rod!
  • From: Wayne Cook
• Re: MIG feed roller groove
  • From: dcaster
• Re: Cutting advice please
  • From: dcaster
• Re: name that rod!
  • From: dcaster
• name that rod!
  • From: mhorowit
• Re: "keyhole" shape?
  • From: Vernon
• Re: OA Filler rod for car repair
  • From: RoyJ
• Re: Cutting advice please
  • From: Richard Smith
• OA Filler rod for car repair
  • From: Jim
• Re: Welding aircraft exhaust, sucess!
  • From: RDF
• Re: Cutting advice please
  • From: mhorowit
• MIG feed roller groove
  • From: Andrew Mawson
• Re: "keyhole" shape?
  • From: Richard Smith
• Re: "keyhole" shape?
  • From: Peter Grey
• Re: Tacking Al sheet
  • From: Ernie Leimkuhler
• Re: "keyhole" shape?
  • From: Ernie Leimkuhler
• Re: TIG makes my fluorescent lights flicker...
  • From: Gunner
• Re: TIG makes my fluorescent lights flicker...
  • From: stag5353
• Re: cutting a fishmouth joint
  • From: Martin H. Eastburn
• Re: Cooling joints rapidly?
  • From: Vernon
• Re: TIG makes my fluorescent lights flicker...
  • From: acrobat ants
• Re: Tacking Al sheet
  • From: acrobat ants
• Re: Aluminum welding filler metal chart
  • From: Ernie Leimkuhler
• Re: cutting a fishmouth joint
  • From: Vernon
• Re: TIG makes my fluorescent lights flicker...
  • From: Martin H. Eastburn
• Re: cutting a fishmouth joint
  • From: Martin H. Eastburn
• Re: Amended - was Mig polarity and other stuff...long...sigh
  • From: Wayne Cook
• Re: Amended - was Mig polarity and other stuff...long...sigh
  • From: ATP*
• TIG makes my fluorescent lights flicker...
  • From: stag5353
• Re: Tacking Al sheet
  • From: Vernon
• Amended - was Mig polarity and other stuff...long...sigh
  • From: Gunner
• Re: Hydraulics for a Pro-tools/ JD-squared bender
  • From: habbi
• Re: Aluminum welding filler metal chart
  • From: John Noon
• clarke spool gun welder
  • From: habbi
• Re: Mig polarity and other stuff...long...sigh
  • From: Gunner
• Re: "keyhole" shape?
  • From: John
• Re: "keyhole" shape?
  • From: Peter Grey
• Re: "keyhole" shape?
  • From: John
• Re: Critique my weld please
  • From: GDC
• Re: Cutting advice please
  • From: dcaster
• Re: cutting a fishmouth joint
  • From: Grant Erwin
• Re: cutting a fishmouth joint
  • From: cl
• Tacking Al sheet
  • From: cl
• Re: cutting a fishmouth joint
  • From: Vernon
• Re: "keyhole" shape?
  • From: Vernon
• Re: Welding aircraft exhaust, sucess!
  • From: Michelle P
• Re: beam strength question
  • From: Brian
• "keyhole" shape?
  • From: Michael Horowitz
• Re: Mig polarity and other stuff...long...sigh
  • From: ATP*
• Re: Mig polarity and other stuff...long...sigh
  • From: Ernie Leimkuhler
• Re: Aluminum welding filler metal chart
  • From: Ernie Leimkuhler
• Re: Mig polarity and other stuff...long...sigh
  • From: Gunner
• Re: beam strength question
  • From: enl_public
• Re: which TIG filler?
  • From: zeb7k
• Re: Aluminum welding filler metal chart
  • From: Bart D. Hull
• Re: beam strength question
  • From: RoyJ
• Re: Cutting advice please
  • From: Leo Lichtman
• Re: Cutting advice please
  • From: JohnM
• Re: Cutting advice please
  • From: dcaster
• Re: Welding aircraft exhaust, sucess!
  • From: dcaster
• Re: Gauge creep?
  • From: Winston
• Re: Welding aircraft exhaust, sucess!
  • From: RDF
• Re: Cutting advice please
  • From: Michael Horowitz
• Re: Aluminum welding filler metal chart
  • From: Boris Mohar
• Re: Aluminum welding filler metal chart
  • From: john noon
• beam strength question
  • From: Brian
• Re: Some help please
  • From: R. Zimmerman
• Aluminum welding filler metal chart
  • From: John Noon
• Re: Cutting advice please
  • From: Leo Lichtman
• Re: Some help please
  • From: John Noon
• Re: Some help please
  • From: Tim Wescott
• Re: Some help please
  • From: R. Zimmerman
• Re: Some help please
  • From: solo
• Re: Some help please
  • From: R. Zimmerman
• Re: profile cutter
  • From: R. Zimmerman
• Re: Cutting advice please
  • From: R. Zimmerman
• profile cutter
  • From: Al
• Re: Cutting advice please
  • From: Grant Erwin
• Cutting advice please
  • From: Michael Horowitz
• Re: Mig polarity and other stuff...long...sigh
  • From: ATP*
• Some help please
  • From: solo
• Re: Mig polarity and other stuff...long...sigh
  • From: Gunner Asch
• Re: Cooling joints rapidly?
  • From: Leo Lichtman
• Re: Mig polarity and other stuff...long...sigh
  • From: dcaster
• Re: Cooling joints rapidly?
  • From: dcaster
• Re: The Smith Welding Co. (selling parts)
  • From: Michael Horowitz
• Re: using 'black' pipe for building projects???
  • From: zeb7k
• Re: The metal band on the hoses; can I move it?
  • From: Jess
• which TIG filler?
  • From: zeb7k
• Re: OT LED flashlights
  • From: enl_public
• Re: using 'black' pipe for building projects???
  • From: RoyJ
• Re: Cooling joints rapidly?
  • From: enl_public
• Re: using 'black' pipe for building projects???
  • From: Grant Erwin
• Re: using 'black' pipe for building projects???
  • From: enl_public
• Re: Mig polarity and other stuff...long...sigh
  • From: ATP*
• using 'black' pipe for building projects???
  • From: Michael Horowitz
• Cooling joints rapidly?
  • From: Michael Horowitz
• Mig polarity and other stuff...long...sigh
  • From: Gunner Asch
• Re: The Smith Welding Co. (selling parts)
  • From: Michael Horowitz
• Re: Welding aircraft exhaust, sucess!
  • From: Ernie Leimkuhler
• Re: OT LED flashlights
  • From: Ted Edwards
• Re: OT LED flashlights
  • From: Too_Many_Tools
• MIG TSSA Certification question.
  • From: solo
• Re: Which Welder Do I Need?
  • From: dcaster
• Re: The Smith Welding Co. (selling parts)
  • From: dcaster
• Re: Has anyone had to leave their OA rig outside? How best protect?
  • From: Vernon
• Re: The Smith Welding Co. (selling parts)
  • From: Rooster
• Re: Which Welder Do I Need?
  • From: Robert Ball
• The Smith Welding Co. (selling parts)
  • From: Michael Horowitz
• Has anyone had to leave their OA rig outside? How best protect?
  • From: Michael Horowitz
• Re: Which Welder Do I Need?
  • From: RDF
• Re: Which Welder Do I Need?
  • From: Grant Erwin
• Re: Gauge creep?
  • From: Leo Lichtman
• Which Welder Do I Need?
  • From: Mike
• Re: The metal band on the hoses; can I move it?
  • From: Michael Horowitz
• Re: Aluminum welds
  • From: Badsolo
• Re: Gauge creep?
  • From: Grant Erwin
• Re: The metal band on the hoses; can I move it?
  • From: Jess
• Re: Welding aircraft exhaust, sucess!
  • From: Michelle P
• Gauge creep?
  • From: Michael Horowitz
• The metal band on the hoses; can I move it?
  • From: Michael Horowitz
• Re: When did flame arrestors start being used?
  • From: R. Zimmerman
• Re: Welding aircraft exhaust
  • From: Michelle P
• Re: Welding aircraft exhaust
  • From: Michelle P
• Re: Inspecting, cleaning, regulator, torch, handle, etc
  • From: Michael Horowitz
• Re: Welding aircraft exhaust
  • From: Ernie Leimkuhler
• Re: When did flame arrestors start being used?
  • From: Vernon
• Re: Info request on materials
  • From: Carl Ijames
• Re: Info request on materials
  • From: Grant Erwin
• Info request on materials
  • From: Billl George
• Re: Aluminum welds
  • From: Martin H. Eastburn
• Re: Best electrode to handle vibration?
  • From: BoyntonStu
• Re: Welding aircraft exhaust
  • From: Brian
• hey I just bought some Eutectic Staintrode A-MO, 3/32" AC/DC welding electrodes on ebay!!!?? woo hoo
  • From: bob
• Re: Welding aircraft exhaust
  • From: Michelle P
• Welding aircraft exhaust
  • From: Michelle P
• Re: Best electrode to handle vibration?
  • From: R. Zimmerman
• Re: powcon 300st or a maxstar 150 st
  • From: bob
• Re: powcon 300st or a maxstar 150 st
  • From: bob
• Re: powcon 300st or a maxstar 150 st
  • From: bob
• Re: Removing Solar-B flux
  • From: Ernie Leimkuhler
• Re: Aluminum welds
  • From: RDF
• Re: powcon 300st or a maxstar 150 st
  • From: Ernie Leimkuhler
• Re: Aluminum welds
  • From: Ernie Leimkuhler
• Re: Critique my weld please
  • From: JohnM
• Re: Best electrode to handle vibration?
  • From: JohnM
• Re: Aluminum welds
  • From: Wayne Cook
• Re: Best electrode to handle vibration?
  • From: RoyJ
• Re: MIG welding near grease? safe?
  • From: carl mciver
• Re: Best electrode to handle vibration?
  • From: RDF
• Re: Aluminum welds
  • From: Leo Lichtman
• powcon 300st or a maxstar 150 st
  • From: bob
• Re: MIG welding near grease? safe?
  • From: Leo Lichtman
• Re: Maxstar 150 ST , thinking of buying one but..
  • From: bob
• Re: Maxstar 150 ST , thinking of buying one but..
  • From: bob
• Best electrode to handle vibration?
  • From: BoyntonStu
• MIG welding near grease? safe?
  • From: GDC
• Re: Removing Solar-B flux
  • From: cl
• Re: Aluminum welds
  • From: spjames
• Aluminum welds
  • From: steamer
• Re: Removing Solar-B flux
  • From: Boris Mohar
• Re: Critique my weld please
  • From: GDC
• Re: Removing Solar-B flux
  • From: cl
• Re: When did flame arrestors start being used?
  • From: RDF
• Re: When did flame arrestors start being used?
  • From: R. Zimmerman
• When did flame arrestors start being used?
  • From: Michael Horowitz
• Re: Critique my weld please
  • From: Randy Zimmerman
• Re: Maxstar 150 ST , thinking of buying one but..
  • From: Vernon
• Re: Maxstar 150 ST , thinking of buying one but..
  • From: enl_public
• Re: Color of SS welds
  • From: Boris Mohar
• Re: Inspecting, cleaning, regulator, torch, handle, etc
  • From: R. Zimmerman
• Re: Removing Solar-B flux
  • From: Ernie Leimkuhler
• Re: Maxstar 150 ST , thinking of buying one but..
  • From: Ernie Leimkuhler
• Re: Maxstar 150 ST , thinking of buying one but..
  • From: garyh82012
• Re: Removing Solar-B flux
  • From: cl
• Miller 330 A/BP Rectifier
  • From: Phil
• Re: Removing Solar-B flux
  • From: cl
• Inspecting, cleaning, regulator, torch, handle, etc
  • From: mhorowit
• Re: Cutting Steel Tub
  • From: Gunner
• Re: What size Shop A/C Unit . . . .
  • From: me
• Re: Cutting Steel Tub
  • From: ATP*
• Re: Cutting Steel Tub
  • From: Leo Lichtman
• Re: Removing Solar-B flux
  • From: Boris Mohar
• Re: Maxstar 150 ST , thinking of buying one but..
  • From: Ernie Leimkuhler
• Re: What size Shop A/C Unit . . . .
  • From: Steve Smith
• Maxstar 150 ST , thinking of buying one but..
  • From: bob
• Re: Cutting Steel Tub
  • From: JohnM
• Re: Removing Solar-B flux
  • From: cl
• Re: Critique my weld please
  • From: GDC
• Re: making a welding bench?
  • From: steamer
• Re: Cutting Steel Tub
  • From: David Todtman
• Re: Regulator "accident"
  • From: cl
• Re: What shielding gas for MIG?
  • From: Gunner
• Re: Removing Solar-B flux
  • From: Drendle
• Re: Questions on Welding 1" HRS Plate
  • From: Artemia Salina
• Re: Cutting Steel Tub
  • From: JohnM
• Re: Regulator "accident"
  • From: JohnM
• Re: What shielding gas for MIG?
  • From: JohnM
• Re: brazing cast iron
  • From: JohnM
• Re: Questions on Welding 1" HRS Plate
  • From: dcaster
• Re: Questions on Welding 1" HRS Plate
  • From: RoyJ
• Re: Questions on Welding 1" HRS Plate
  • From: R. Zimmerman
• Re: Cutting Steel Tub
  • From: Martin H. Eastburn
• Re: Removing Solar-B flux
  • From: Boris Mohar
• Re: Thin sheet metal...beginner...
  • From: clutchglass@xxxxxxxxx
• Re: What size Shop A/C Unit . . . .
  • From: Clif Holland
• What size Shop A/C Unit . . . .
  • From: Steve DeMars
• Re: OT: Burning Man?
  • From: Emmo
• Re: OT: Burning Man?
  • From: RDF
• Re: Questions on Welding 1" HRS Plate
  • From: Leo Lichtman
• Re: 1995 Aerowave for sale
  • From: MK1
• Re: Thin sheet metal...beginner...
  • From: scottinhim
• Re: multiple tube joints
  • From: Diamond Jim
• Re: Cutting Steel Tub
  • From: RoyJ
• Re: making a welding bench?
  • From: Don D.
• Re: Removing Solar-B flux
  • From: cl
• Re: Cutting Steel Tub
  • From: dlwilson
• Re: Harbor Freight "MIG" welder--Works!
  • From: Gunner Asch
• Re: Cutting Steel Tub
  • From: Gunner Asch
• Re: Harbor Freight "MIG" welder--Works!
  • From: Gary
• Re: 1995 Aerowave for sale
  • From: RDF
• Re: Welding certification and next step
  • From: RDF
• Re: Cutting Steel Tub
  • From: RDF
• Re: Harbor Freight "MIG" welder--Works!
  • From: RDF
• Re: making a welding bench?
  • From: Pit Builder
• Re: Cutting Steel Tub
  • From: jcrichto
• Re: Cutting Steel Tub
  • From: RoyJ
• Re: Questions on Welding 1" HRS Plate
  • From: RoyJ
• Re: Cutting Steel Tub
  • From: dcaster
• Re: ? aligning joints at either end?
  • From: Jess
• Harbor Freight "MIG" welder--Works!
  • From: Don W
• Re: Ernie's Notching Grinder
  • From: Michael Horowitz
• Re: Why would a...
  • From: MetalHead
• Re: Cutting Steel Tub
  • From: Leo Lichtman
• Re: Questions on Welding 1" HRS Plate
  • From: R. Zimmerman
• Steel Prices
  • From: MSU Spartan
• Re: Cutting Steel Tub
  • From: ATP*
• Re: Cutting Steel Tub
  • From: Pat
• Re: Thin sheet metal...beginner...
  • From: acrobat ants
• Re: Thin sheet metal...beginner...
  • From: buke9
• Re: Welding certification and next step
  • From: Peter Grey
• Re: Color of SS welds
  • From: acrobat ants
• Re: Welding certification and next step
  • From: Ernie Leimkuhler
• Re: Color of SS welds
  • From: Ernie Leimkuhler
• Re: Cutting Steel Tub
  • From: jcrichto
• Re: Cutting Steel Tub
  • From: RoyJ
• Re: brazing cast iron
  • From: Diamond Jim
• Re: ? aligning joints at either end?
  • From: Diamond Jim
• Re: Cutting Steel Tub
  • From: Grant Erwin
• Re: Cutting Steel Tub
  • From: RDF
• Re: Color of SS welds
  • From: richard . smith . met
• Re: Color of SS welds
  • From: Peter Grey
• Re: Cutting Steel Tub
  • From: jcrichto
• Removing Solar-B flux
  • From: Boris Mohar
• Re: Color of SS welds
  • From: AMW
• Re: Cutting Steel Tub
  • From: jcrichto
• Re: Cutting Steel Tub
  • From: RoyJ
• Re: Cutting Steel Tub
  • From: Grant Erwin
• Cutting Steel Tub
  • From: jcrichto
• Re: Welding certification and next step
  • From: Peter Grey
• Thin sheet metal...beginner...
  • From: scottinhim
• Re: Welding certification and next step
  • From: Artemia Salina
• Abrasive chart
  • From: me
• Color of SS welds
  • From: Peter Grey
• Welding certification and next step
  • From: Peter Grey
• Re: Questions on Welding 1" HRS Plate
  • From: Artemia Salina
• Why would a...
  • From: cl
• Re: grinding wheel for tungsten
  • From: Gunner Asch
• Re: making a welding bench?
  • From: Gunner Asch
• Re: brazing cast iron
  • From: Gunner Asch
• Re: Why stick welding on ships...
  • From: Gunner Asch
• Re: Questions on Welding 1" HRS Plate
  • From: Grant Erwin
• grinding wheel for tungsten
  • From: me
• Questions on Welding 1" HRS Plate
  • From: Artemia Salina
• Re: CV welding auto exhaust
  • From: Don W
• Re: CHT 100
  • From: Ernie Leimkuhler
• Re: Ernie's Notching Grinder
  • From: R. Zimmerman
• fs:Katolight 10 kw Generator 231 hrs.
  • From: drb
• CHT 100
  • From: glensmith
• Re: Welding aircraft tubing book
  • From: John Noon
• Re: Regulator "accident"
  • From: RDF
• Welding aircraft tubing book
  • From: John Noon
• Re: Fire brick/quarry tile?
  • From: RoyJ
• Re: CV welding auto exhaust
  • From: Randy Zimmerman
• For your consideration -
  • From: Michael Horowitz
• Re: making a welding bench?
  • From: Michael Horowitz
• Fire brick/quarry tile?
  • From: Michael Horowitz
• Re: making a welding bench?
  • From: Don D.
• Re: welding certs & welder price (was "Re: Why stick welding on ships...")
  • From: Greg M
• Regulator "accident"
  • From: Jeremy Samuels
• Re: Lincoln Squarewave 175
  • From: RoyJ
• Re: I survived another summer of teaching.
  • From: R. Zimmerman
• Re: Why stick welding on ships...
  • From: JTMcC
• Re: CV welding auto exhaust
  • From: Pete C.
• Re: OT LED flashlights
  • From: John T
• Re: 4130 tubing as filler? 4130 FAQ link
  • From: John T
• Re: MM210 ROCKS!!
  • From: BoyntonStu
• Re: OT LED flashlights
  • From: RDF
• Re: 1995 Aerowave for sale
  • From: RDF
• I survived another summer of teaching.
  • From: Ernie Leimkuhler
• Re: welding certs & welder price (was "Re: Why stick welding on ships...")
  • From: Ernie Leimkuhler
• 4130 tubing as filler? 4130 FAQ link
  • From: John Noon
• Re: OT LED flashlights
  • From: Steve Smith
• Re: FA Roll Bender
  • From: steamer
• Re: Why stick welding on ships...
  • From: RoyJ
• Re: welding certs & welder price (was "Re: Why stick welding on ships...")
  • From: Randy Zimmerman
• welding certs & welder price (was "Re: Why stick welding on ships...")
  • From: Grant Erwin
• OT LED flashlights
  • From: Randy Zimmerman
• Re: Why stick welding on ships...
  • From: Randy Zimmerman
• Re: cutting a fishmouth joint
  • From: Ken Moffett
• Re: Is it possible/safe to mount a grinding disc on a circular saw?
  • From: Michael Horowitz
• Re: Why stick welding on ships...
  • From: Grant Erwin
• Re: mig welding pliers?
  • From: Diamond Jim
• Re: Is it possible/safe to mount a grinding disc on a circular saw?
  • From: RAM^3
• Re: CV welding auto exhaust
  • From: Don W
• Re: MM210 ROCKS!!
  • From: RoyJ
• Re: mig welding pliers?
  • From: Don D.
• Re: Why stick welding on ships...
  • From: ATP*
• Re: MM210 ROCKS!!
  • From: BoyntonStu
• Re: MM210 ROCKS!!
  • From: BoyntonStu
• FA Roll Bender
  • From: tbone
• Re: MM210 ROCKS!!
  • From: RoyJ
• Re: Why stick welding on ships...
  • From: Randy Zimmerman
• Re: What shielding gas for MIG?
  • From: ATP*
• Re: making a welding bench?
  • From: Martin H. Eastburn
• Re: Why stick welding on ships...
  • From: ATP*
• Re: transporting acetylene
  • From: JTMcC
• Re: Is it possible/safe to mount a grinding disc on a circular saw?
  • From: ATP*
• Re: Why stick welding on ships...
  • From: Grant Erwin
• Re: Why stick welding on ships...
  • From: carl mciver
• Re: Why stick welding on ships...
  • From: Grant Erwin
• Re: making a welding bench?
  • From: DanG
• Is it possible/safe to mount a grinding disc on a circular saw?
  • From: Michael Horowitz
• Re: flame cut small square hole
  • From: DanG
• Re: transporting acetylene
  • From: Jess
• Re: brazing cast iron
  • From: Wayne Cook
• Re: 1995 Aerowave for sale
  • From: williamhenry
• Re: MM210 ROCKS!!
  • From: BoyntonStu
• Re: cutting a fishmouth joint
  • From: Grant Erwin
• Re: Why stick welding on ships...
  • From: Ernie Leimkuhler
• Re: CV welding auto exhaust
  • From: MES
• Re: cutting a fishmouth joint
  • From: Ken Moffett
• Re: MM210 ROCKS!!
  • From: RoyJ
• Re: MM210 ROCKS!!
  • From: RoyJ
• Re: transporting acetylene
  • From: wmbjk
• Re: Practicing on conduit
  • From: David Todtman
• Re: mig welding pliers?
  • From: jpolaski
• Re: transporting acetylene
  • From: jpolaski
• Re: ? aligning joints at either end?
  • From: steamer
• Ernie's Notching Grinder
  • From: mhorowit
• Re: CV welding auto exhaust
  • From: Don W
• Re: transporting acetylene
  • From: carl mciver
• Re: transporting acetylene
  • From: dcaster
• Re: brazing cast iron
  • From: John Noon
• Re: transporting acetylene
  • From: Grant Erwin
• GTAW Skills Development
  • From: John Noon
• Re: transporting acetylene
  • From: JTMcC
• Re: Lincoln Squarewave 175
  • From: Jeff Sellers
• Re: multiple tube joints
  • From: John Noon
• Re: cutting a fishmouth joint
  • From: dlwilson
• Re: making a welding bench?
  • From: Randy Zimmerman
• Re: ? aligning joints at either end?
  • From: Randy Zimmerman
• Re: ? aligning joints at either end?
  • From: Grant Erwin
• Re: MM210 ROCKS!!
  • From: BoyntonStu
• Re: Plasma Cutter
  • From: John Caffrey
• Re: making a welding bench?
  • From: GDC
• ? aligning joints at either end?
  • From: mhorowit
• Re: Why stick welding on ships...
  • From: Randy Zimmerman
• Re: Lincoln Squarewave 175
  • From: me
• Re: making a welding bench?
  • From: Gunner
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Atomino
• Why stick welding on ships...
  • From: Bart D. Hull
• Re: cutting a fishmouth joint
  • From: Grant Erwin
• Re: Practicing on conduit
  • From: Leo Lichtman
• Re: Practicing on conduit
  • From: William Wixon
• Re: mig welding pliers?
  • From: Randy Zimmerman
• cutting a fishmouth joint
  • From: Michael Horowitz
• Re: mig welding pliers?
  • From: Keith Marshall
• Re: Plasma Cutter
  • From: Ernie Leimkuhler
• Re: 4130 tubing as filler?
  • From: Ernie Leimkuhler
• Re: mig welding pliers?
  • From: wmbjk
• Re: mig welding pliers?
  • From: SteveB
• Re: mig welding pliers?
  • From: Tom Lawrence
• Re: Practicing on conduit
  • From: David Todtman
• Re: MM210 ROCKS!!
  • From: Tom Lawrence
• Re: making a welding bench?
  • From: David Todtman
• Re: TIG welder choice
  • From: signaturefactory
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: post
• Re: mig welding pliers?
  • From: dcaster
• Re: making a welding bench?
  • From: Gerald Cooper
• Re: making a welding bench?
  • From: Emmo
• making a welding bench?
  • From: GDC
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Atomino
• 4130 tubing as filler?
  • From: mhorowit
• Re: MM210 ROCKS!!
  • From: RoyJ
• Re: mig welding pliers?
  • From: James Walsh Jr.
• Re: mig welding pliers?
  • From: Wayne Cook
• mig welding pliers?
  • From: Grant Erwin
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: post
• Re: multiple tube joints
  • From: John T
• Re: What shielding gas for MIG?
  • From: SteveB
• Re: MM210 ROCKS!!
  • From: SteveB
• Plasma Cutter
  • From: John Caffrey
• Re: MM210 ROCKS!!
  • From: Tom Lawrence
• MM210 ROCKS!!
  • From: GDC
• Re: What shielding gas for MIG?
  • From: GDC
• Re: What shielding gas for MIG?
  • From: James Walsh Jr.
• Re: Want to learn tig Welding
  • From: richard . smith . met
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Atomino
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Atomino
• Re: 1995 Aerowave for sale
  • From: RDF
• Re: Practicing on conduit
  • From: Leo Lichtman
• Re: I can make pretty lines but still cannot join metal.
  • From: Sparkeee24
• Re: Practicing on conduit
  • From: Sparkeee24
• Re: OT: Burning Man?
  • From: Ernie Leimkuhler
• Re: multiple tube joints
  • From: carl mciver
• Re: DIY Handcart?
  • From: Larry
• Re: multiple tube joints
  • From: Owen Davies
• DIY Handcart?
  • From: Michael Horowitz
• Re: Practicing on conduit
  • From: Michael Horowitz
• Re: Practicing on conduit
  • From: footy
• Re: WalkingTheCup, revisited
  • From: John
• Re: What shielding gas for MIG?
  • From: Dan
• CV welding auto exhaust
  • From: Don W
• Re: Electrode for sand rail chassis?
  • From: Jeff Sellers
• Re: Practicing on conduit
  • From: Jeff Sellers
• Re: What shielding gas for MIG?
  • From: Jeff Sellers
• Re: multiple tube joints
  • From: Brian
• Re: Lincoln Squarewave 175
  • From: Brian
• Re: Electrode for sand rail chassis?
  • From: Brian
• Re: Electrode for sand rail chassis?
  • From: Brian
• Re: Burning Man?
  • From: Emmo
• Re: What shielding gas for MIG?
  • From: Emmo
• What shielding gas for MIG?
  • From: GDC
• Practicing on conduit
  • From: mhorowit
• OT: Burning Man?
  • From: steamer
• Re: multiple tube joints
  • From: steamer
• Re: multiple tube joints
  • From: steamer
• Re: multiple tube joints
  • From: RoyJ
• Re: transporting acetylene
  • From: JTMcC
• Re: transporting acetylene
  • From: JTMcC
• Re: multiple tube joints
  • From: Owen Davies
• Re: WalkingTheCup, revisited
  • From: post
• Re: Lincoln Squarewave 175
  • From: richard . smith . met
• Re: TIG welder choice
  • From: Ernie Leimkuhler
• Re: Lincoln Squarewave 175
  • From: Ernie Leimkuhler
• Re: multiple tube joints
  • From: steamer
• Re: 1995 Aerowave for sale
  • From: steamer
• Re: transporting acetylene
  • From: Pat
• Re: Lincoln Squarewave 175
  • From: Emmo
• Re: transporting acetylene
  • From: Grant Erwin
• Re: transporting acetylene
  • From: JTMcC
• Re: transporting acetylene
  • From: carl mciver
• TIG welder choice
  • From: signaturefactory
• Re: 1995 Aerowave for sale
  • From: williamhenry
• Lincoln Squarewave 175
  • From: David keyen
• Re: transporting acetylene
  • From: Leo Lichtman
• Re: multiple tube joints
  • From: Tim Wescott
• Re: transporting acetylene
  • From: John
• Re: WalkingTheCup, revisited
  • From: John
• Re: Electrode for sand rail chassis?
  • From: Andy Dingley
• Re: transporting acetylene
  • From: Jeff Sellers
• Re: Electrode for sand rail chassis?
  • From: Jeff Sellers
• Re: transporting acetylene
  • From: Grant Erwin
• transporting acetylene
  • From: Michael Horowitz
• Re: multiple tube joints
  • From: RoyJ
• Re: Electrode for sand rail chassis?
  • From: Brian
• Re: multiple tube joints
  • From: Owen Davies
• Re: Millermatic 210
  • From: Jeff Dantzler
• Re: Electrode for sand rail chassis?
  • From: Jeff Sellers
• multiple tube joints
  • From: Brian
• Re: Millermatic 210
  • From: SteveB
• Re: Millermatic 210
  • From: HotRod
• Re: WalkingTheCup, revisited
  • From: Keith Marshall
• WalkingTheCup, revisited
  • From: post
• Re: Electrode for sand rail chassis?
  • From: JTMcC
• Re: Millermatic 210
  • From: GDC
• Re: Electrode for sand rail chassis?
  • From: Brian
• Re: Electrode for sand rail chassis?
  • From: BoyntonStu
• Re: Electrode for sand rail chassis?
  • From: Artemia Salina
• Re: welding C channel and rect tubing
  • From: Ken Hilson
• Re: Electrode for sand rail chassis?
  • From: Vernon
• Re: Millermatic 210
  • From: Martin H. Eastburn
• Re: brazing cast iron
  • From: Wayne Cook
• Re: brazing cast iron
  • From: Wayne Cook
• Re: Millermatic 210
  • From: Ernie Leimkuhler
• Re: Electrode for sand rail chassis?
  • From: Ernie Leimkuhler
• Re: 1995 Aerowave for sale
  • From: Ernie Leimkuhler
• Want to learn tig Welding
  • From: C
• Re: brazing cast iron
  • From: williamhenry
• Re: Electrode for sand rail chassis?
  • From: Andy Dingley
• Re: Millermatic 210
  • From: RDF
• Re: Millermatic 210
  • From: Paul T.
• 1995 Aerowave for sale
  • From: RDF
• Re: Electrode for sand rail chassis?
  • From: RDF
• Re: Electrode for sand rail chassis?
  • From: RDF
• Re: Electrode for sand rail chassis?
  • From: BoyntonStu
• Re: Electrode for sand rail chassis?
  • From: Artemia Salina
• Re: Electrode for sand rail chassis?
  • From: SteveB
• Re: Electrode for sand rail chassis?
  • From: BoyntonStu
• Re: Millermatic 210
  • From: RDF
• Re: Electrode for sand rail chassis?
  • From: Artemia Salina
• Re: Millermatic 210
  • From: JohnM
• Re: Electrode for sand rail chassis?
  • From: SteveB
• Re: Electrode for sand rail chassis?
  • From: JohnM
• Re: brazing cast iron
  • From: JohnM
• Re: One hundred and one TIG questions
  • From: Vernon
• Re: Millermatic 210
  • From: SteveB
• Millermatic 210
  • From: GDC
• Electrode for sand rail chassis?
  • From: BoyntonStu
• Re: brazing cast iron
  • From: Wayne Cook
• Re: brazing cast iron
  • From: JohnM
• Re: brazing cast iron
  • From: Wayne Cook
• Re: brazing cast iron
  • From: Wayne Cook
• Re: One hundred and one TIG questions
  • From: Bart D. Hull
• Re: brazing cast iron
  • From: Vernon
• Re: I can make pretty lines but still cannot join metal.
  • From: RoyJ
• Re: brazing cast iron
  • From: Randy Zimmerman
• Re: I can make pretty lines but still cannot join metal.
  • From: BoyntonStu
• Re: brazing cast iron
  • From: Wayne Cook
• brazing cast iron
  • From: Randy Zimmerman
• Re: welding C channel and rect tubing
  • From: RoyJ
• Re: One hundred and one TIG questions
  • From: Ernie Leimkuhler
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Ernie Leimkuhler
• Re: One hundred and one TIG questions
  • From: Artemia Salina
• Re: flame cut small square hole
  • From: Pete
• Re: One hundred and one TIG questions
  • From: Gunner
• Re: Tigging Tailpipe
  • From: JohnM
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Vernon
• Re: OT Re: welding C channel and rect tubing
  • From: Vernon
• Re: That HF TIG again...
  • From: carl mciver
• Re: welding C channel and rect tubing
  • From: Ken Hilson
• Re: Tigging Tailpipe
  • From: Randy Zimmerman
• OT Re: welding C channel and rect tubing
  • From: Randy Zimmerman
• Re: welding C channel and rect tubing
  • From: SteveB
• Re: That HF TIG again...
  • From: Vernon
• Re: That HF TIG again...
  • From: Vernon
• Re: welding C channel and rect tubing
  • From: Vernon
• Re: One hundred and one TIG questions
  • From: Vernon
• Added some dropbox items today Hypertherm 600 fine cut in copper
  • From: Martin H. Eastburn
• Re: That HF TIG again...
  • From: Diamond Jim
• Tigging Tailpipe
  • From: steamer
• Re: That HF TIG again...
  • From: Keith Marshall
• Re: One hundred and one TIG questions
  • From: Ernie Leimkuhler
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Ernie Leimkuhler
• Re: welding C channel and rect tubing
  • From: Randy Zimmerman
• Invitation to visit Metal Web News
  • From: William Gray
• Re: flame cut small square hole
  • From: JohnM
• welding C channel and rect tubing
  • From: Ken Hilson
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: dcaster
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Atomino
• Re: flame cut small square hole
  • From: RoyJ
• Re: A picture for your enjoyment
  • From: SteveB
• Re: One hundred and one TIG questions
  • From: Vernon
• Re: One hundred and one TIG questions
  • From: Vernon
• Re: That HF TIG again...
  • From: Vernon
• Re: One hundred and one TIG questions
  • From: Vernon
• Re: One hundred and one TIG questions
  • From: mlcorson
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Atomino
• Re: A picture for your enjoyment
  • From: Gunner
• Re: One hundred and one TIG questions
  • From: Gunner
• Re: flame cut small square hole
  • From: carl mciver
• Re: flame cut small square hole
  • From: Grant Erwin
• Re: flame cut small square hole
  • From: SteveB
• flame cut small square hole
  • From: Fox
• Re: That HF TIG again...
  • From: SteveB
• Re: One hundred and one TIG questions
  • From: fatumsch
• Re: One hundred and one TIG questions
  • From: carl mciver
• That HF TIG again...
  • From: carl mciver
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: dcaster
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Vernon
• Re: A picture for your enjoyment
  • From: SteveB
• Re: One hundred and one TIG questions
  • From: Peter Grey
• Re: A picture for your enjoyment
  • From: Martin H. Eastburn
• Re: One hundred and one TIG questions
  • From: Emmo
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Atomino
• Re: One hundred and one TIG questions
  • From: Boris Mohar
• Re: A picture for your enjoyment
  • From: SteveB
• Re: One hundred and one TIG questions
  • From: Vernon
• Re: One hundred and one TIG questions
  • From: Vernon
• Re: One hundred and one TIG questions
  • From: Vernon
• Re: A picture for your enjoyment
  • From: Wayne Cook
• Re: One hundred and one TIG questions
  • From: David Todtman
• Re: One hundred and one TIG questions
  • From: Brian
• Re: One hundred and one TIG questions
  • From: Vernon
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: JohnM
• Re: One hundred and one TIG questions
  • From: Emmo
• Re: One hundred and one TIG questions
  • From: Vernon
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Artemia Salina
• A picture for your enjoyment
  • From: SteveB
• Re: One hundred and one TIG questions
  • From: Gunner
• Re: One hundred and one TIG questions
  • From: Emmo
• Re: One hundred and one TIG questions
  • From: mlcorson
• Re: One hundred and one TIG questions
  • From: dcaster
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Atomino
• Re: One hundred and one TIG questions
  • From: Keith Marshall
• Re: One hundred and one TIG questions
  • From: Keith Marshall
• Re: Miller Maxstar 140 amperage adjustable while hot?
  • From: Andrew H. Wakefield
• Re: One hundred and one TIG questions
  • From: Randy Zimmerman
• Re: One hundred and one TIG questions
  • From: bitternut
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: JohnM
• Re: help me on setting Lincoln Invertec V205-T AC/DC
  • From: Atomino
• Re: 6010 -comments, please
  • From: richard . smith . met
• Re: One hundred and one TIG questions
  • From: Vernon
• Re: One hundred and one TIG questions
  • From: Keith Marshall
• Re: my mig beads aren't pretty
  • From: Vernon
• Re: Miller Maxstar 140 amperage adjustable while hot?
  • From: Vernon
• One hundred and one TIG questions
  • From: Vernon
• help me on setting Lincoln Invertec V205-T AC/DC
  • From: Atomino
• Re: Miller Maxstar 140 amperage adjustable while hot?
  • From: Vernon
• Re: Miller Maxstar 140 amperage adjustable while hot?
  • From: stag5353
• Re: welding fume litigation
  • From: Dave Mundt
• Re: UNI-MIG welders - are they any good?
  • From: Balders
• Re: cleaning of slag?
  • From: carl mciver
• Re: Miller Maxstar 140 amperage adjustable while hot?
  • From: Andrew H. Wakefield
• Re: UNI-MIG welders - are they any good?
  • From: Balders
• Re: cleaning of slag?
  • From: RoyJ
• Re: cleaning of slag?
  • From: RoyJ
• Re: cleaning of slag?
  • From: Randy Zimmerman
• Re: UNI-MIG welders - are they any good?
  • From: HughChapman
• Re: cleaning of slag?
  • From: richard . smith . met
• Re: cleaning of slag?
  • From: henning wright
• Re: cleaning of slag?
  • From: footy
• Re: my mig beads aren't pretty
  • From: wallster
• Re: cleaning of slag?
  • From: SteveB
• Re: cleaning of slag?
  • From: Vernon
• Re: cleaning of slag?
  • From: Randy Zimmerman
• Re: cleaning of slag?
  • From: Vernon
• Re: cleaning of slag?
  • From: Randy Zimmerman
• Re: cleaning of slag?
  • From: SteveB
• Re: cleaning of slag?
  • From: RoyJ
• Re: I can make pretty lines but still cannot join metal.
  • From: Andy
• cleaning of slag?
  • From: henning wright
• Mig welding with a generator - any problems? advice? comments?
  • From: Doorbell
• Re: my mig beads aren't pretty
  • From: SteveB
• Re: Miller Maxstar 140 amperage adjustable while hot?
  • From: JohnM
• Re: Miller Maxstar 140 amperage adjustable while hot?
  • From: dcaster
• Miller Maxstar 140 amperage adjustable while hot?
  • From: Vernon
• Re: my mig beads aren't pretty
  • From: gr8tek
• Re: 6010 -comments, please
  • From: JohnM
• Re: my mig beads aren't pretty
  • From: Leo Lichtman
• Re: need miller help
  • From: MetalHead
• Re: my mig beads aren't pretty
  • From: SteveB
• Re: my mig beads aren't pretty
  • From: dlwilson
• Re: need miller help
  • From: joebass
• Re: I can make pretty lines but still cannot join metal.
  • From: SteveB
• Re: Hydraulics for a Pro-tools/ JD-squared bender
  • From: williamhenry
• need miller help
  • From: williamhenry
• Re: Hydraulics for a Pro-tools/ JD-squared bender
  • From: stag5353
• Re: I can make pretty lines but still cannot join metal.
  • From: Vernon
• Re: I can make pretty lines but still cannot join metal.
  • From: BoyntonStu
• Re: Cambering Beams Info Required
  • From: JohnM
• Re: Hydraulics for a Pro-tools/ JD-squared bender
  • From: RDF
• Re: Hydraulics for a Pro-tools/ JD-squared bender
  • From: JohnM
• Re: An Interesting Couple of Days
  • From: JohnM
• Re: black pipe, ends not threaded, hard to thread. Structural grade?
  • From: RoyJ
• Re: Hydraulics for a Pro-tools/ JD-squared bender
  • From: RoyJ
• Re: I can make pretty lines but still cannot join metal.
  • From: Andrew H. Wakefield
• Re: black pipe, ends not threaded, hard to thread. Structural grade?
  • From: Gunner
• Re: Cambering Beams Info Required
  • From: John Noon
• Hydraulics for a Pro-tools/ JD-squared bender
  • From: stag5353
• miller maxstar 200 dx + switched water cooler
  • From: .
• Re: I can make pretty lines but still cannot join metal.
  • From: SteveB
• Re: black pipe, ends not threaded, hard to thread. Structural grade?
  • From: Tim Wescott
• Re: An Interesting Couple of Days
  • From: Gunner
• Re: black pipe, ends not threaded, hard to thread. Structural grade?
  • From: Gunner
• Re: I can make pretty lines but still cannot join metal.
  • From: Andrew H. Wakefield
• Re: I can make pretty lines but still cannot join metal.
  • From: Andrew H. Wakefield
• Re: An Interesting Couple of Days
  • From: SteveB
• Re: my mig beads aren't pretty
  • From: SteveB
• Re: Cambering Beams Info Required
  • From: Andrew H. Wakefield
• black pipe, ends not threaded, hard to thread. Structural grade?
  • From: Spud
• Re: my mig beads aren't pretty
  • From: dlwilson
• Re: Cambering Beams Info Required
  • From: John Caffrey
• Re: TIG Newbie: Bad Machine, or My Error?
  • From: Gunner
• Re: An Interesting Couple of Days
  • From: JohnM
• Re: I can make pretty lines but still cannot join metal.
  • From: JohnM
• Re: my mig beads aren't pretty
  • From: JohnM
• Re: Cambering Beams Info Required
  • From: JohnM
• Re: I can make pretty lines but still cannot join metal.
  • From: dcaster
• Re: my mig beads aren't pretty
  • From: SteveB
• my mig beads aren't pretty
  • From: dlwilson
• Re: TIG Newbie: Bad Machine, or My Error?
  • From: Artemia Salina
• Re: TIG Newbie: Bad Machine, or My Error?
  • From: Martin H. Eastburn
• Setting Invertec V205 for welding aluminium plate of tickness mm.1.5
  • From: Atomino
• Re: I can make pretty lines but still cannot join metal.
  • From: SteveB
• Re: I can make pretty lines but still cannot join metal.
  • From: carl mciver
• Re: I can make pretty lines but still cannot join metal.
  • From: RDF
• Distortion of weldments file type up loaded
  • From: John Noon
• Re: Distortion of weldments
  • From: John Noon
• Re: TIG Newbie: Bad Machine, or My Error?
  • From: RDF
• Re: An Interesting Couple of Days
  • From: SteveB
• Re: An Interesting Couple of Days
  • From: JohnM
• I can make pretty lines but still cannot join metal.
  • From: BoyntonStu
• Re: Distortion of weldments
  • From: Wayne Cook
• Re: TIG Newbie: Bad Machine, or My Error?
  • From: Artemia Salina
• Re: Distortion of weldments
  • From: Randy Zimmerman
• Re: TIG Newbie: Bad Machine, or My Error?
  • From: Mickey
• Re: TIG Newbie: Bad Machine, or My Error?
  • From: Gunner
• Re: TIG Newbie: Bad Machine, or My Error?
  • From: Artemia Salina
• Re: An Interesting Couple of Days
  • From: Leo Lichtman
• Re: TIG Newbie: Bad Machine, or My Error?
  • From: JohnM
• Re: An Interesting Couple of Days
  • From: SteveB
• Re: An Interesting Couple of Days
  • From: Randy Zimmerman
• Re: An Interesting Couple of Days
  • From: Leo Lichtman
• An Interesting Couple of Days
  • From: SteveB
• Re: TIG Newbie: Bad Machine, or My Error?
  • From: Steve W.
• Re: TIG Newbie: Bad Machine, or My Error?
  • From: RDF
• Re: TIG Newbie: Bad Machine, or My Error?
  • From: Michelle P
• TIG Newbie: Bad Machine, or My Error?
  • From: Artemia Salina
• Re: FAO Randy & Vernon
  • From: Randy Zimmerman
• Distortion of weldments
  • From: John Noon
• Re: Cambering Beams Info Required
  • From: John Noon
• Re: FAO Randy & Vernon
  • From: Vernon
• Re: Cambering Beams Info Required
  • From: Ernie Leimkuhler
• Re: Pictures of welding skill
  • From: rparz
• Re: FAO Randy & Vernon
  • From: Vernon
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: RDF
• Re: Cambering Beams Info Required
  • From: Randy Zimmerman
• Re: Cambering Beams Info Required
  • From: John Noon
• Re: Pictures of welding skill
  • From: AMW
• Re: Tig on dewar
  • From: steamer
• Re: Newbie can't see weld pool
  • From: mclorson
• Re: FAO Randy & Vernon
  • From: dlwilson
• Re: Keyhole welding
  • From: HotRod
• Re: Newbie can't see weld pool
  • From: Ernie Leimkuhler
• Re: Newbie can't see weld pool
  • From: Gunner
• Re: Lincoln LN-7
  • From: Ernie Leimkuhler
• Re: inconel 617 tig wire question
  • From: Ernie Leimkuhler
• Re: Tig on dewar
  • From: MetalHead
• Re: Lincoln LN-7
  • From: Randy Zimmerman
• Re: Cambering Beams Info Required
  • From: Randy Zimmerman
• Re: FAO Randy & Vernon
  • From: Randy Zimmerman
• Re: Cambering Beams Info Required
  • From: enl_public
• Cambering Beams Info Required
  • From: shop
• Keyhole welding
  • From: shop
• Pictures of welding skill
  • From: cl
• Re: FAO Randy & Vernon
  • From: carl mciver
• Re: Tig on dewar
  • From: steamer
• Re: FAO Randy & Vernon
  • From: RoyJ
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: RoyJ
• Re: FAO Randy & Vernon
  • From: Balders
• Re: FAO Randy & Vernon
  • From: Randy Zimmerman
• Lincoln LN-7
  • From: DanG
• FAO Randy & Vernon
  • From: Balders
• Re: Tig on dewar
  • From: Peter Fairbrother
• Re: Newbie can't see weld pool
  • From: SteveB
• Re: Newbie can't see weld pool
  • From: Leo Lichtman
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: Randy Zimmerman
• Re: Newbie can't see weld pool
  • From: AMW
• Re: Newbie can't see weld pool
  • From: footy
• Newbie can't see weld pool
  • From: mclorson
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: stans4
• inconel 617 tig wire question
  • From: someone
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: Brian
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: Vernon
• Re: 6010 -comments, please
  • From: Randy Zimmerman
• Re: aluminum to steel
  • From: Balders
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: Balders
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: kenny
• Lincoln AC-225 D.O.M.
  • From: John Strunck
• Re: Electrode Help
  • From: enl_public
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: Randy Zimmerman
• Re: Buying O/A tanks for a torch in Minnesota
  • From: Eide
• Re: aluminum to steel
  • From: cl
• Re: 6010 -comments, please
  • From: richard . smith . met
• Re: aluminum to steel
  • From: RDF
• Re: aluminum to steel
  • From: cl
• Re: The HTS 2000 I have been pimping
  • From: RDF
• Re: The HTS 2000 I have been pimping
  • From: Rick
• Re: aluminum to steel
  • From: RDF
• The HTS 2000 I have been pimping
  • From: RDF
• Re: aluminum to steel
  • From: cl
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: RDF
• Re: aluminum to steel
  • From: RDF
• Re: 6010 -comments, please
  • From: BoyntonStu
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: Tim Wescott
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: Balders
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: RoyJ
• Re: aluminum to steel
  • From: Balders
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: Balders
• Re: Newbie Migweld Q?
  • From: HotRod
• Re: Crack in Aluminium Crankcase (MIG help)
  • From: Randy Zimmerman
• Crack in Aluminium Crankcase (MIG help)
  • From: Balders
• Re: Using Paintball Cylinder for MIG
  • From: JohnM
• Re: Thermal Arc 250 GTSW
  • From: Ernie Leimkuhler
• Re: Using Paintball Cylinder for MIG
  • From: dcaster
• Re: aluminum to steel
  • From: Rich Lockyer
• Re: "sucker" flexible ducting source?
  • From: Rick
• Re: Buying O/A tanks for a torch in Minnesota
  • From: Mickey
• Re: "sucker" flexible ducting source?
  • From: Martin H. Eastburn
• Re: welding cart
  • From: Grant Erwin
• Re: welding cart
  • From: Martin H. Eastburn
• Re: "sucker" flexible ducting source?
  • From: Martin H. Eastburn
• Re: Buying O/A tanks for a torch in Minnesota
  • From: RoyJ
• Buying O/A tanks for a torch in Minnesota
  • From: Mickey
• Re: welding cart
  • From: AL
• Re: aluminum to steel
  • From: RDF
• aluminum to steel
  • From: Rusted
• Re: TIG question, on stainless, (Ernie?)
  • From: acrobat ants
• Re: 6010 -comments, please
  • From: richard . smith . met
• Re: Newbie 6011 dot problem
  • From: richard . smith . met
• Re: Using Paintball Cylinder for MIG
  • From: Jeremy Samuels
• Re: Using Paintball Cylinder for MIG
  • From: dcaster
• Re: welding cart
  • From: Martin H. Eastburn
• Re: OT: But I had to share this,
  • From: JohnM
• Using Paintball Cylinder for MIG
  • From: Jeremy Samuels
• welding cart
  • From: john noon
• Re: But I had to share this,
  • From: RDF
• Re: But I had to share this,
  • From: Pete C.
• Re: But I had to share this,
  • From: Eide
• Electrode Help
  • From: Marlin \(N5XJD\)
• Thermal Arc 250 GTSW
  • From: donb
• Re: oxy/Acetelyne welding 1/2 inch steel
  • From: rick . deshon
• Re: Inert gas bottles
  • From: Andy Dingley
• Re: TIG question, on stainless, (Ernie?) supplemental :)
  • From: Ernie Leimkuhler
• Re: welding fume litigation
  • From: dcaster
• Re: Newbie 6011 dot problem
  • From: Ernie Leimkuhler
• Re: welding fume litigation
  • From: Andrew H. Wakefield
• Re: Inverter TIG welder design details ...
  • From: RoyJ
• Re: Newbie Migweld Q?
  • From: Artemia Salina
• Inverter TIG welder design details ...
  • From: Mike Fields
• welding fume litigation
  • From: Emmo
• OT: But I had to share this,
  • From: RDF
• Re: 6010 -comments, please
  • From: alphonse
• Re: Ending a MIG weld
  • From: Ron DeBlock
• Re: 6010 -comments, please
  • From: Gunner
• Re: utility of 1941 welding textbook?
  • From: Randy Zimmerman
• Re: oxy/Acetelyne welding 1/2 inch steel
  • From: dcaster
• Re: oxy/Acetelyne welding 1/2 inch steel
  • From: Sam Perkins
• Re: Plasma Cam
  • From: Martin H. Eastburn
• Re: 6010 -comments, please
  • From: Grant Erwin
• 6010 -comments, please
  • From: Jim L.
• Re: oxy/Acetelyne welding 1/2 inch steel
  • From: Grant Erwin
• OT: Miller Bobcat 250 NT forsale w/wirefeeder and trailer
  • From: domingomontez
• Re: I got another pretty laminated card.
  • From: JohnM
• Re: Inert gas bottles
  • From: Leo Lichtman
• Re: oxy/Acetelyne welding 1/2 inch steel
  • From: Leo Lichtman
• Re: Newbie Migweld Q?
  • From: acrobat ants
• oxy/Acetelyne welding 1/2 inch steel
  • From: rick . deshon
• Re: Plasma Cam
  • From: AndrewV
• Re: Inert gas bottles
  • From: Diamond Jim
• Re: Newbie Migweld Q?
  • From: HotRod
• Re: Tig on dewar
  • From: dcaster
• Re: TIG question, on stainless, (Ernie?) supplemental :)
  • From: acrobat ants
• Re: Newbie 6011 dot problem
  • From: BoyntonStu
• Re: Tig on dewar
  • From: steamer
• Re: Newbie Migweld Q?
  • From: Andrew H. Wakefield
• Re: 2000+ SF Home and 849 SF Shop for sale, Mesa, AZ
  • From: Andrew H. Wakefield
• Re: 2000+ SF Home and 849 SF Shop for sale, Mesa, AZ
  • From: Andrew H. Wakefield
• Re: Newbie Migweld Q?
  • From: HotRod
• Re: TIG question, on stainless, (Ernie?) supplemental :)
  • From: Brian
• Re: TIG question, on stainless, (Ernie?)
  • From: Ernie Leimkuhler
• Re: brass fittings for a DIY tig cooler
  • From: Ernie Leimkuhler
• Re: Newbie 6011 dot problem
  • From: SteveB
• Re: utility of 1941 welding textbook?
  • From: no_child_left_unleashed
• Re: Tig on dewar
  • From: dcaster
• Re: Newbie 6011 dot problem
  • From: Randy Zimmerman
• Re: Newbie 6011 dot problem
  • From: SteveB
• Re: Inert gas bottles
  • From: SteveB
• Re: Inert gas bottles
  • From: MetalHead
• Re: utility of 1941 welding textbook?
  • From: Randy Zimmerman
• Re: Inert gas bottles
  • From: Diamond Jim
• Re: brass fittings for a DIY tig cooler
  • From: MetalHead
• Re: Inert gas bottles
  • From: MetalHead
• Re: tig cable cover fabric
  • From: Martin H. Eastburn
• Re: Inert gas bottles
  • From: Steve W.
• Re: Newbie 6011 dot problem
  • From: Jim L.
• Re: Inert gas bottles
  • From: Bruce Sutton
• 2000+ SF Home and 849 SF Shop for sale, Mesa, AZ
  • From: Marty Escarcega
• Inert gas bottles
  • From: RDF
• Re: tig cable cover fabric
  • From: Dennis van Dam
• Re: TIG question, on stainless, (Ernie?)
  • From: Mark Lorenz
• TIG question, on stainless, (Ernie?)
  • From: acrobat ants
• brass fittings for a DIY tig cooler
  • From: me
• Re: Newbie Migweld Q?
  • From: James Walsh Jr.
• Re: Newbie Migweld Q?
  • From: HotRod
• Re: Ending a MIG weld
  • From: James Walsh Jr.
• Re: Newbie Migweld Q?
  • From: James Walsh Jr.
• Re: tig cable cover fabric
  • From: stans4
• Re: Newbie 6011 dot problem
  • From: SteveB
• Re: Newbie 6011 dot problem
  • From: SteveB
• Re: Newbie 6011 dot problem
  • From: richard . smith . met
• Newbie Migweld Q?
  • From: HotRod
• Re: "sucker" flexible ducting source?
  • From: Rick
• Re: Newbie 6011 dot problem
  • From: Randy Zimmerman
• Newbie 6011 dot problem
  • From: BoyntonStu
• Re: "sucker" flexible ducting source?
  • From: Geoff M
• Re: Ending a MIG weld
  • From: richard . smith . met
• Re: Ending a MIG weld
  • From: Gunner
• Re: "sucker" flexible ducting source?
  • From: Gunner
• Re: Ending a MIG weld
  • From: Randy Zimmerman
• Re: "sucker" flexible ducting source?
  • From: Martin H. Eastburn
• Re: Ending a MIG weld
  • From: Leo Lichtman
• Re: I got another pretty laminated card.
  • From: SteveB
• Re: I got another pretty laminated card.
  • From: RDF
• Re: Using aluminum Mig wire for fine TIG work
  • From: RDF
• I got another pretty laminated card.
  • From: Ernie Leimkuhler
• Re: TIG and inside corners
  • From: Ernie Leimkuhler
• Re: Ending a MIG weld
  • From: Randy Zimmerman
• Re: Keyhole welding with wire-feed
  • From: shop
• Re: Carbon arc -- now what?
  • From: shop
• Re: Carbon arc -- now what?
  • From: shop
• Re: utility of 1941 welding textbook?
  • From: richard . smith . met
• Re: TIG and inside corners
  • From: Pete C.
• Re: "sucker" flexible ducting source?
  • From: Grant Erwin
• Re: TIG and inside corners
  • From: pgrey
• Re: "sucker" flexible ducting source?
  • From: me
• Re: Carbon arc -- now what?
  • From: Andrew H. Wakefield
• Ending a MIG weld
  • From: Ron DeBlock
• Re: utility of 1941 welding textbook?
  • From: RDF
• Re: utility of 1941 welding textbook?
  • From: Gunner
• Re: "sucker" flexible ducting source?
  • From: Gunner
• Re: TIG and inside corners
  • From: Brian
• Re: Carbon arc -- now what?
  • From: Grant Erwin
• Re: "sucker" flexible ducting source?
  • From: Grant Erwin
• Re: Carbon arc -- now what?
  • From: RoyJ
• Re: utility of 1941 welding textbook?
  • From: Randy Zimmerman
• utility of 1941 welding textbook?
  • From: no_child_left_unleashed
• Re: TIG and inside corners
  • From: Gunner
• Re: "sucker" flexible ducting source?
  • From: Gunner
• Re: TIG and inside corners
  • From: Ernie Leimkuhler
• Re: Carbon arc -- now what?
  • From: Bert
• Re: TIG and inside corners
  • From: richard . smith . met
• Re: Using aluminum Mig wire for fine TIG work
  • From: mike
• Using aluminum Mig wire for fine TIG work
  • From: Dave Sage
• Re: TIG and inside corners
  • From: Richard
• Re: TIG and inside corners
  • From: Ernie Leimkuhler
• Re: TIG and inside corners
  • From: Pete C.
• Re: "sucker" flexible ducting source?
  • From: me
• Re: "sucker" flexible ducting source?
  • From: Steve W.
• Re: Question re. soapstone in welding
  • From: Andy Dingley
• Re: Tig on dewar
  • From: Andy Dingley
• Re: "sucker" flexible ducting source?
  • From: JohnM
• Re: Another thought re: avoiding fires
  • From: Speechless
• Re: Tig on dewar
  • From: steamer
• TIG and inside corners
  • From: John
• Re: tig cable cover fabric
  • From: sir.eggplantalot@xxxxxxxxx
• Re: "sucker" flexible ducting source?
  • From: Rick
• Re: "sucker" flexible ducting source?
  • From: Grant Erwin
• Re: "sucker" flexible ducting source?
  • From: Alex H. Sallwey
• Re: Plasma Cam
  • From: mclorson
• Re: bending stainless steel tubing
  • From: Brian
• Re: Tig on dewar
  • From: richard . smith . met
• Re: tig cable cover fabric
  • From: Dennis van Dam
• Re: "sucker" flexible ducting source?
  • From: Keith Marshall
• Re: Question re. soapstone in welding
  • From: me
• Re: "sucker" flexible ducting source?
  • From: Grant Erwin
• Re: "sucker" flexible ducting source?
  • From: Grant Erwin
• Re: "sucker" flexible ducting source?
  • From: carl mciver
• Re: tig cable cover fabric
  • From: MetalHead
• soapstone
  • From: me
• Re: "sucker" flexible ducting source?
  • From: me
• Re: "sucker" flexible ducting source?
  • From: Keith Marshall
• Re: "sucker" flexible ducting source?
  • From: Steve Smith
• "sucker" flexible ducting source?
  • From: Grant Erwin
• Re: tig cable cover fabric
  • From: Martin H. Eastburn
• Re: Carbon arc -- now what?
  • From: RoyJ
• Re: Plasma Cam
  • From: m5bmw
• Re: bending stainless steel tubing
  • From: Ernie Leimkuhler
• tig cable cover fabric
  • From: me
• Re: Carbon arc -- now what?
  • From: Andrew H. Wakefield
• Re: bending stainless steel tubing
  • From: Brian
• Re: UNI-MIG welders - are they any good?
  • From: Balders
• Re: bending stainless steel tubing
  • From: RoyJ
• bending stainless steel tubing
  • From: Brian
• Re: UNI-MIG welders - are they any good?
  • From: John Crighton
• Re: UNI-MIG welders - are they any good?
  • From: HughChapman
• Re: Carbon arc -- now what?
  • From: Diamond Jim
• Re: Carbon arc -- now what?
  • From: Steve W.
• Re: Carbon arc -- now what?
  • From: RoyJ
• Re: Carbon arc -- now what?
  • From: Andrew H. Wakefield
• Re: Plasma Cam
  • From: Sven
• Re: Plasma Cam
  • From: Eat at Sloppy Joes
• Re: Carbon arc -- now what?
  • From: mb
• Re: UNI-MIG welders - are they any good?
  • From: HughChapman
• Re: UNI-MIG welders - are they any good?
  • From: John Crighton
• Re: UNI-MIG welders - are they any good?
  • From: HughChapman
• Re: UNI-MIG welders - are they any good?
  • From: John Crighton
• Re: Plasma Cam
  • From: John Marks
• Re: Tig on dewar
  • From: JohnM
• Re: Carbon arc -- now what?
  • From: Andrew H. Wakefield
• Re: Plasma Cam
  • From: m5bmw
• Re: Plasma Cam
  • From: John Marks
• Re: Plasma Cam
  • From: RDF
• Re: Carbon arc -- now what?
  • From: RoyJ
• Re: Tig on dewar
  • From: steamer
• Carbon arc -- now what?
  • From: Andrew H. Wakefield
• Re: Tig on dewar
  • From: Dev Null
• Re: Question about AGLEVTECH
  • From: Dev Null
• Re: Flashback Arrestors
  • From: Keith Marshall
• Re: Tig on dewar
  • From: Andy Dingley
• Re: Flashback Arrestors
  • From: Randy Zimmerman
• Re: Plasma Cam
  • From: Steve Smith
• Re: Flashback Arrestors
  • From: Eide
• Re: Plasma Cam
  • From: John Marks
• UNI-MIG welders - are they any good?
  • From: HughChapman
• Re: Plasma Cam
  • From: RDF
• Re: Plasma Cam
  • From: John Marks
• Re: Plasma Cam
  • From: RDF
• Re: Tig on dewar
  • From: carl mciver
• Plasma Cam
  • From: John Marks
• Flashback Arrestors
  • From: J. B.
• Re: Tig on dewar
  • From: Andy Dingley
• Re: Tig- converting to water cooled torch- help
  • From: Dennis van Dam
• Re: Tig- converting to water cooled torch- help
  • From: Ernie Leimkuhler
• Re: Tig on dewar
  • From: steamer
• Re: Tig- converting to water cooled torch- help
  • From: Dennis van Dam
• Re: Tig on dewar
  • From: richard . smith . met
• Re: gear repair question
  • From: Andrew Mawson
• Re: gear repair question
  • From: Randy Zimmerman
• Re: Tig on dewar
  • From: steamer
• Re: gear repair question
  • From: carl mciver
• Re: Tig on dewar
  • From: williamhenry
• Re: AWS Code Applicability
  • From: Shawn
• Re: Tig on dewar
  • From: steamer
• Re: Tig on dewar
  • From: dogalone
• Re: gear repair question
  • From: Andy Dingley
• Tig on dewar
  • From: steamer
• Re: converting from air to water torch on the 185 lincoln tig
  • From: Potblak
• Re: converting from air to water torch on the 185 lincoln tig
  • From: Ernie Leimkuhler
• converting from air to water torch on the 185 lincoln tig
  • From: me
• Re: rec'd small DC 120 Volt welder
  • From: MetalHead
• Re: rec'd small DC 120 Volt welder
  • From: Eide
• Re: Slow throw 50a breaker?? regular HD ok??
  • From: Ted Edwards
• Re: gear repair question
  • From: williamhenry
• Re: AWS Code Applicability
  • From: footy
• Re: gear repair question
  • From: Grant Erwin
• Re: rec'd small DC 120 Volt welder
  • From: John D
• Re: gear repair question
  • From: Leo Lichtman
• Re: rec'd small DC 120 Volt welder
  • From: Doctor John
• Re: gear repair question
  • From: Artemia Salina
• Re: gear repair question
  • From: Leo Lichtman
• Nitrogen Gas Generator for Lead-Free Soldering
  • From: Charles L
• Practical Oxy Acetyline Welding 1938 FA
  • From: evans_susie
• gear repair question
  • From: ben carter
• Re: rec'd small DC 120 Volt welder
  • From: Grant Erwin
• Re: rec'd small DC 120 Volt welder
  • From: Doctor John
• Re: rec'd small DC 120 Volt welder
  • From: Gunner
• Re: rec'd small DC 120 Volt welder
  • From: Grant Erwin
• Re: Question about AGLEVTECH
  • From: Pete C.
• Re: Question about AGLEVTECH
  • From: RDF
• Re: Question about AGLEVTECH
  • From: bitternut
• Re: rec'd small DC 120 Volt welder
  • From: Gunner
• Re: Question about AGLEVTECH
  • From: MetalHead
• Question about AGLEVTECH
  • From: Bert
• Re: 14 pin compatibility
  • From: Pete C.
• Re: Slow throw 50a breaker?? regular HD ok??
  • From: billh
• Oven Rack Warpage
  • From: Dave
• Re: Slow throw 50a breaker?? regular HD ok??
  • From: me
• Re: rec'd small DC 120 Volt welder
  • From: Grant Erwin
• Re: Slow throw 50a breaker?? regular HD ok??
  • From: RoyJ
• rec'd small DC 120 Volt welder
  • From: Doctor John
• Slow throw 50a breaker?? regular HD ok??
  • From: me
• Re: 185 water cooler?
  • From: acrobat ants
• GMAW Tip consumption
  • From: cl
• 14 pin compatibility
  • From: dogalone
• Re: 185 water cooler?
  • From: Ernie Leimkuhler
• Re: 185 water cooler?
  • From: Gunner
• Re: AWS Code Applicability
  • From: RoyJ
• Re: 185 water cooler?
  • From: MetalHead
• Re: AWS Code Applicability
  • From: Shawn
• 185 water cooler?
  • From: me
• Re: Rosebud versus cutting tip for heating
  • From: carl mciver
• Re: Good deal or not?
  • From: Mike Swift
• Re: Miller 210 question
  • From: RDF
• Rosebud versus cutting tip for heating
  • From: sir.eggplantalot@xxxxxxxxx
• Re: Good deal or not?
  • From: John T
• Re: AWS Code Applicability
  • From: footy
• Re: Tig- converting to water cooled torch- help
  • From: Dennis van Dam
• Re: Harbor Freight Tig
  • From: Diamond Jim
• Re: Help with brass
  • From: Dennis van Dam
• Re: Help with brass
  • From: RoyJ
• Re: Good deal or not?
  • From: Keith Marshall
• Tig- converting to water cooled torch- help
  • From: Rooster
• Re: Good deal or not?
  • From: JohnM
• Re: Help with brass
  • From: Dennis van Dam
• Re: Good deal or not?
  • From: Leo Lichtman
• Re: Is it possible to tig pot metal?
  • From: Andy Dingley
• Re: Harbor Freight Tig
  • From: Glenn
• Re: AWS Code Applicability
  • From: Jeff Sellers
• Re: Is it possible to tig pot metal?
  • From: Gunner
• Re: Good deal or not?
  • From: acrobat ants
• Re: Harbor Freight Tig
  • From: Ted Edwards
• Re: Miller 210 question
  • From: acrobat ants
• Re: How to reverse the weld-pak 3200 drive roller
  • From: acrobat ants
• Re: AWS Code Applicability
  • From: Randy Zimmerman
• Re: Help with brass
  • From: RoyJ
• Re: AWS Code Applicability
  • From: Jeff Sellers
• Re: AWS Code Applicability
  • From: Randy Zimmerman
• Re: AWS Code Applicability
  • From: Shawn
• Re: Welding Cast Iron and others - new to all of this - add'l comment
  • From: Andy Dingley
• Re: Is it possible to tig pot metal?
  • From: Andy Dingley
• Re: Making a headset band
  • From: Andy Dingley
• Re: Harbor Freight Tig
  • From: Diamond Jim
• Re: Help with brass
  • From: Dennis van Dam

We are proud to have Web Hosting and Rack Housing from 9 Net Avenue Deutschland.
(11)