Re: Battery capacity

Oops...I forgot to mention that the inverter will shut down at 11
volts. But I only let it go to that once.

Larry

William P.N. Smith wrote:
"larry.greenwood@xxxxxxxxxxxxxxx" <lgreenwood@xxxxxxx> wrote:
Interesting....I have noticed that when I turn off the load the voltage
go up a couple of percentage points, ie, a load voltage of 12.2 volts
goes up to 12.4 when I turn off the load. Is that what you are talking
about?

That's it! There's probably some low-voltage cutoff you should use if
it's not already built into your inverter, but you really need to get
your connections fixed before you do anything else. Use something
like http://geekho.com/ClampTerminal.jpg

.

Relevant Pages

  • Re: Battery capacity
    ... William P.N. Smith wrote: ... go up a couple of percentage points, ie, a load voltage of 12.2 volts ...
    (sci.chem.electrochem.battery)
  • Re: Battery capacity
    ... go up a couple of percentage points, ie, a load voltage of 12.2 volts ... it's not already built into your inverter, but you really need to get ...
    (sci.chem.electrochem.battery)
  • Re: KDS LCD monitor, Sampo Inverter..
    ... I found a pin out on the net and states that pin's ... Pin 4 is a dimmer control, it's at 3.35 volts, ... I assume the inverter board should be operating and ... save this monitor and use it for a spare.. ...
    (sci.electronics.repair)
  • Re: KDS LCD monitor, Sampo Inverter..
    ... I found a pin out on the net and states that pin's ... Pin 4 is a dimmer control, it's at 3.35 volts, ... I assume the inverter board should be operating and ... Actually, I made a mistake on the vender of the monitor, it's AOC, not ...
    (sci.electronics.repair)
  • Re: KDS LCD monitor, Sampo Inverter..
    ... Franc Zabkar wrote: ... I found a pin out on the net and states that pin's ... Pin 4 is a dimmer control, it's at 3.35 volts, ... I assume the inverter board should be operating and ...
    (sci.electronics.repair)