Re: After market or home-made jig for the Delta Mortising Attachment


"Peter in Escondido" <pbenson92025@xxxxxxxxx> wrote in message
news:0f231691-cab5-455d-aea5-bf6ac5308562@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Delta makes an inexpensive mortising attachment for a drill press. It
is useful but hard to set up and adjust. I was wondering whether any
woodworker has put together a home-made jig to replace the fence or
knows of an after market fence that is easier to adjust and set up.

Thanks


Almost every one that buys the jig ends up going the $200 or so and gets the
dedicated bench top mortiser.


.

Relevant Pages

  • Re: Help with 60s-70s Craftsman Table Saw ID and parts, please.
    ... Dad gave it to me when I bought my first house, ... I replaced the fence with a t-square type fence because it would ... adjust is on the left, the height adjust in on the front, and the ... table just to the right of the blade on the front of the saw. ...
    (rec.woodworking)
  • Re: Need help choosing a table saw
    ... enough to adjust their current tools, not willing to adjust their ... It was badly rusted and the fence simply could not be adjusted to do ... The blade is not a WWII and has a runout ... have to pick up an aftermarket fence like I did but the total cost will ...
    (rec.woodworking)
  • Re: Plate Joiners - Barrel Grip or D-Handle?
    ... My Domino had an issue with the eccentric indexing pin. ... be totally removed to be adjusted and I had to adjust it to its extreme ... path and replaced the fence assembly. ... A phone call to Festool 5 minutes later and they would over ...
    (rec.woodworking)
  • Re: Jet Xacta II woes part II
    ... and I have sanded them down to get a good fit. ... the fence. ... Adjust the fence so the face most often used perpendicular to the table ...
    (rec.woodworking)
  • Re: Help with 60s-70s Craftsman Table Saw ID and parts, please.
    ... Fortunately the fence seems to hold well, the miter seems pretty true, ... I just need to adjust the blade so that it is parallel to the miter ... Also replaced the belt with a link type belt, ...
    (rec.woodworking)