Re: need long blade chisel

Fred wrote:
I need to chisel some 2"x1-3/4" rectangular holes through some 10" beams. Some are pine and some are harder woods like white oak. I want a 1" chisel with at least a 5" blade.

Anyone know where I can order a good quality one?

Thanks,

Fred


http://www.traditionalwoodworker.com/product_info.php/cPath/39_172_231/products_id/948

--
Jack Novak
Buffalo, NY - USA
no-SPAM-vasys@xxxxxxxxxxxx
(Remove -SPAM- to send email)
.

Relevant Pages

  • Re: need long blade chisel
    ... Some are pine and some are harder woods like white oak. ... I want a 1" chisel ... with at least a 5" blade. ...
    (rec.woodworking)
  • need long blade chisel
    ... I need to chisel some 2"x1-3/4" rectangular holes through some 10" beams. ... Some are pine and some are harder woods like white oak. ...
    (rec.woodworking)
  • Re: Question for Luthiers about Bridge Re-glue Job
    ... he is using the chisel as if it where a ... remember to scrape (pull the blade ... it is harder than the scraper). ... that you will scrape against the wood by holding the scraper in both ...
    (rec.music.makers.builders)
  • Re: Question for Luthiers about Bridge Re-glue Job
    ... But step seven is a bit perplexing: how is he scraping the old glue ... he is using the chisel as if it where a ... remember to scrape (pull the blade ... It sounds like this can take a loong time, ...
    (rec.music.makers.builders)
  • Re: Busse blades
    ... Steve, just because a blade is ground on both sides doesn't mean the edge ... An asymmetrical edge is one of those. ... I have a feeling that he wasn't talking about a chisel grind. ...
    (rec.knives)