Re: Help with plexi-glass

Thanks everybody at 7/16 thick I don't think it would crack to easy would
it?
"Kyle Boatright" <kboatright1@xxxxxxxxxxx> wrote in message
news:H6ednc2cJaqPksjZnZ2dnUVZ_tydnZ2d@xxxxxxxxxxxxxx

"TINY" <TINY@xxxxxxxxxxx> wrote in message
news:4i75g.19190$eR6.13287@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
What can I use to cut 7/16 thick piece of plexi-glass, I have a 8ft x
6ft piece of it

As someone has mentioned, a jigsaw would work, but you really need to
support the cut well. In addition, you want that plexi to be warm when
you cut it. 80f is OK, but warmer is better. It is much less brittle and
crack-prone at the higher temps.







.

Relevant Pages

  • Re: Repair of door threshold
    ... For a quick fix, try "Quikrete No. 8640, Gray Concrete Seal" which could ... fill gaps up to 1/2" thick and has some give so it shouldn't crack. ...
    (alt.home.repair)
  • Re: Hogging out a 2" x 32" in Walnut
    ... How thick is your board? ... a jigsaw would be a good way to go. ... making the entire cut would be pretty hard on your router and bit ... unless you make a rough cut to close dimensions first. ...
    (rec.woodworking)
  • Re: Repair of door threshold
    ... For a quick fix, try "Quikrete No. 8640, Gray Concrete Seal" which could ... fill gaps up to 1/2" thick and has some give so it shouldn't crack. ...
    (alt.home.repair)
  • Re: soccer saturday
    ... After all he did was crack a joke ... about Beckham being thick. ...
    (uk.sport.football.clubs.liverpool)