Fish eyes in poly varnish

From: "Tom" <tomkanpa@xxxxxxx>
Date: 31 Mar 2006 06:02:41 -0800

I am applying a new coat(s) of MinWax wipe on satin poly. I roughed up
the old original coat and am sanding between coats. There are fish eyes
in the finish from years and years of waxing, cleaning, etc.. Is there
anything I can do to cover these blemishes short of stripping the table
down to the wood. My brother in law told me that doing this might not
solve the problem, there could be wax or silicone in the wood and the
fish eyes will still be there.

.

Follow-Ups:
- Re: Fish eyes in poly varnish
  - From: Mike Marlow
- Re: Fish eyes in poly varnish
  - From: David
- Re: Fish eyes in poly varnish
  - From: Leon

Prev by Date: Re: What's up with price of solvents?
Next by Date: Re: bought a new saw today
Previous by thread: Power Feeder on a Spindle
Next by thread: Re: Fish eyes in poly varnish
Index(es):
- Date
- Thread

Relevant Pages

Re: Fish eyes in poly varnish
... the old original coat and am sanding between coats. ... in the finish from years and years of waxing, cleaning, etc.. ... down to the wood. ... fish eyes will still be there. ...
(rec.woodworking)
Re: Fish eyes in poly varnish
... down to the wood. ... fish eyes will still be there. ... I would try sanding to bare wood, putting down a coat of shellac and then ...
(rec.woodworking)