Rousseau Deluxe Router Base Plate Mod. 3509

Don't follow the installation instructions step by step. The 3" dimension
in Fig. 1 is wrong. Do the math at the bottom of the next page and then
subtract 3/8" from that figure for the set-back on the homemade guides.

viz:
((diameter of base minus 1/2") divided by 2) minus 3/8" = setback for
template.

DAMHIKT

<---- waiting for the glue to dry on cleats even as we speak. Also waiting
to see what Rousseau does with his request for reimbursement for the 3/4"
thick phenolic-coated plywood with the too-large hole in the middle that I
am almost certainly going to have to replace.

Bill
.

Relevant Pages
Loading